Partition type set to none

How to use TestDisk to recover lost partition

Partition type set to none

Postby c0mputerking » 07 Sep 2012, 02:26

Ok i have a bit of a complicated setup for the partition in question using software raid 5 and lvm on debian squeeze to host a bunch of virtual machines. Something went wrong the other day and the hypervisor system froze with a bunch of /proc/xxx hung for xxx seconds forcing me to do a hard reset. The system came back up but went into maintance mode and told me to fsck I used this command "fsck -y /dev/mapper/vg1-root" which took hours and corrected lots of errors. I rebooted and again forced into maintance mode but now when i do a fsck on the disk it tells me this
superblock

so i tried this
backup superblock

of corse this did not work so i broke out systemrescuecd and ran testdisk 6.13 did the normal way INTEL type partion and it finds a bunch of partitions none of them right and i cannot (p) list on any of them. I could go on and on about the stuff i have tried the last couple of days, tring to recover using backup superblocks including setting the backup superblock to 0 and 4096 but lets cut to the chase.

I can find the correct partion if i set the partition type to NONE and i can list my files too which is relief

I found this similar post (see below)which gives me hope as i can even see my files with p however it seems a bit compex to go it alone hoping for some guidace here.

3tb-hd-deleted-ext4-formated-ntfs-t428.html?hilit=Write%20isn't%20available&start=20

PS i can see my files when debian boot to maintiance mode and even mounts /dev/mapper/vg1-root but only int read only i think

Thank you in advance for your help

3tb-hd-deleted-ext4-formated-ntfs-t428.html?hilit=Write%20isn't%20available&start=20
c0mputerking
 
Posts: 4
Joined: 06 Sep 2012, 23:40

Partition type set to none

Sponsor

Sponsor
 
 

Re: Partition type set to none

Postby Fiona » 07 Sep 2012, 07:24

If you use partition table type None, you'll not able to write any partition table because you've chosen None.
Please copy and paste the content of your testdisk.log or upload a screen.
I'd need infos from Analyse (your current partition table) and your found partition, where you can list your files from.
Might be possible to change geometry, so that your partition will be found.

Fiona
User avatar
Fiona
 
Posts: 2013
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Partition type set to none

Postby c0mputerking » 07 Sep 2012, 08:23

Ok i attached the testdisk log file sorry i tried to attach it last post to but i guess it didnt work cause it was too large sorry. This time i did not let the deep scan run to completion as it makes the logfile to large to attach and it just finds a whole bunch of wrong partitions. Also below is a screen shot not much to go on let me know if you need help. Also thank you very much for your help

TestDisk 6.13, Data Recovery Utility, November 2011
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/mapper/vg1-root - 285 GB / 265 GiB - CHS 556752896 1 1
Partition Start End Size in sectors
>P ext4 0 556752895 556752896 [root]

Structure: Ok.


Keys T: change type, P: list files,
Enter: to continue
EXT4 Large file Sparse superblock, 285 GB / 265 GiB
Attachments
testdisklog.zip
(58.49 KiB) Downloaded 63 times
c0mputerking
 
Posts: 4
Joined: 06 Sep 2012, 23:40

Re: Partition type set to none

Postby Fiona » 07 Sep 2012, 12:26

For determining your disk geometry, you should use partition table type intel.
If you confirm at analyse, please upload the info.
I'd need especially infos from disk, what's described there.
Also partition information are appreciated.
You can also copy and paste it from the testdisk.log in your post.

Fiona
User avatar
Fiona
 
Posts: 2013
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Partition type set to none

Postby c0mputerking » 03 Oct 2012, 04:04

Crap i didnt get notification of your reply thought you forgot about me anyways partition is still broken so maybe you can still help me get it going? I think this is the infos you require testdisk.log of an intel type

Code: Select all
root % cat testdisk.log


Wed Oct  3 02:45:55 2012
Command line: TestDisk

TestDisk 6.13, Data Recovery Utility, November 2011
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Linux, kernel 3.2.28-std300-amd64 (#2 SMP Tue Aug 21 18:35:38 UTC 2012) x86_64
Compiler: GCC 4.4
Compilation date: 2012-08-12T14:23:52
ext2fs lib: 1.42.5, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size       488281250 sectors
/dev/sda: user_max   488281250 sectors
/dev/sda: native_max 488281250 sectors
/dev/sda: dco        488281250 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512
/dev/mapper/pve-root: LBA, HPA, LBA48, DCO support
/dev/mapper/pve-root: size       201326592 sectors
/dev/mapper/pve-root: user_max   488281250 sectors
/dev/mapper/pve-root: native_max 488281250 sectors
/dev/mapper/pve-root: dco        488281250 sectors
/dev/mapper/pve-swap: LBA, HPA, LBA48, DCO support
/dev/mapper/pve-swap: size       8388608 sectors
/dev/mapper/pve-swap: user_max   488281250 sectors
/dev/mapper/pve-swap: native_max 488281250 sectors
/dev/mapper/pve-swap: dco        488281250 sectors
/dev/sr0 is not an ATA disk
/dev/dm-0: LBA, HPA, LBA48, DCO support
/dev/dm-0: size       201326592 sectors
/dev/dm-0: user_max   488281250 sectors
/dev/dm-0: native_max 488281250 sectors
/dev/dm-0: dco        488281250 sectors
/dev/dm-1: LBA, HPA, LBA48, DCO support
/dev/dm-1: size       8388608 sectors
/dev/dm-1: user_max   488281250 sectors
/dev/dm-1: native_max 488281250 sectors
/dev/dm-1: dco        488281250 sectors
Hard disk list
Disk /dev/sda - 250 GB / 232 GiB - CHS 30394 255 63, sector size=512 - WDC WD2502ABYS-18B7A0, S/N:WD-WCAT1H970269, FW:02.03B05
Disk /dev/mapper/pve-root - 103 GB / 96 GiB - CHS 201326592 1 1, sector size=512 - WDC WD2502ABYS-18B7A0, S/N:WD-WCAT1H970269, FW:02.03B05
Disk /dev/mapper/pve-swap - 4294 MB / 4096 MiB - CHS 8388608 1 1, sector size=512 - WDC WD2502ABYS-18B7A0, S/N:WD-WCAT1H970269, FW:02.03B05
Disk /dev/sr0 - 363 MB / 346 MiB - CHS 177452 1 1 (RO), sector size=2048 - HL-DT-ST BD-RE  BH12LS35, S/N:K9MB2SH2043, FW:1.00
Disk /dev/dm-0 - 103 GB / 96 GiB - CHS 201326592 1 1, sector size=512 - WDC WD2502ABYS-18B7A0, S/N:WD-WCAT1H970269, FW:02.03B05
Disk /dev/dm-1 - 4294 MB / 4096 MiB - CHS 8388608 1 1, sector size=512 - WDC WD2502ABYS-18B7A0, S/N:WD-WCAT1H970269, FW:02.03B05

Partition table type (auto): None
Disk /dev/mapper/pve-root - 103 GB / 96 GiB - WDC WD2502ABYS-18B7A0
Partition table type: Intel

Analyse Disk /dev/mapper/pve-root - 103 GB / 96 GiB - CHS 201326592 1 1
Current partition structure:

Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0

search_part()
Disk /dev/mapper/pve-root - 103 GB / 96 GiB - CHS 201326592 1 1

block_group_nr 1

recover_EXT2: part_offset problem
BAD_RS LBA=879066043 384
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0E
     FAT16 LBA              879066043 4232554595 3353488553
This partition ends after the disk limits. (start=879066043, size=3353488553, end=4232554595, disk end=201326592)
NTFS at 582423/0/1
heads/cylinder 16 (NTFS) != 1 (HD)
sect/track 2 (NTFS) != 1 (HD)
filesystem size           6174
sectors_per_cluster       1
mft_lcn                   2058
mftmirr_lcn               5162
clusters_per_mft_record   2
clusters_per_index_record 8
     HPFS - NTFS               582423     588596       6174 [Boot]
     NTFS, 3161 KB / 3087 KiB
NTFS at 637823/0/1
heads/cylinder 16 (NTFS) != 1 (HD)
sect/track 2 (NTFS) != 1 (HD)
filesystem size           6174
sectors_per_cluster       1
mft_lcn                   2058
mftmirr_lcn               5162
clusters_per_mft_record   2
clusters_per_index_record 8
     HPFS - NTFS               637823     643996       6174 [Boot]
     NTFS, 3161 KB / 3087 KiB

block_group_nr 3

recover_EXT2: part_offset problem

block_group_nr 5

recover_EXT2: part_offset problem

block_group_nr 7

recover_EXT2: part_offset problem

block_group_nr 9

recover_EXT2: part_offset problem

block_group_nr 25

recover_EXT2: part_offset problem

block_group_nr 27

recover_EXT2: part_offset problem

block_group_nr 49

recover_EXT2: part_offset problem

block_group_nr 81

recover_EXT2: part_offset problem

block_group_nr 125

recover_EXT2: part_offset problem

LVM2 magic value at 47514548/0/1
part_size 0
     Linux LVM               47514548   47514547          0
     LVM2, 0 B
Partition not added.
BAD_RS LBA=2925073112 127
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0B
     FAT32                 2925073112 3817308592  892235481
This partition ends after the disk limits. (start=2925073112, size=892235481, end=3817308592, disk end=201326592)
BAD_RS LBA=2470999318 197
check_part_i386 failed for partition type 07
     HPFS - NTFS           2470999318 6132560619 3661561302
This partition ends after the disk limits. (start=2470999318, size=3661561302, end=1837593323, disk end=201326592)

LVM2 magic value at 51873540/0/1
part_size 0
     Linux LVM               51873540   51873539          0
     LVM2, 0 B
Partition not added.
BAD_RS LBA=1491115772 485
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0B
     FAT32                 1491115772 5688299263 4197183492
This partition ends after the disk limits. (start=1491115772, size=4197183492, end=1393331967, disk end=201326592)
BAD_RS LBA=2369594287 913
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 01
     FAT12                 2369594287 3399099740 1029505454
This partition ends after the disk limits. (start=2369594287, size=1029505454, end=3399099740, disk end=201326592)
BAD_RS LBA=2929417976 127
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0B
     FAT32                 2929417976 3821653456  892235481
This partition ends after the disk limits. (start=2929417976, size=892235481, end=3821653456, disk end=201326592)

     Linux                   56069113   56069112          0
     LUKS 0 (Data size unknown), 0 B
Partition not added.

LVM2 magic value at 57165076/0/1
part_size 0
     Linux LVM               57165076   57165075          0
     LVM2, 0 B
Partition not added.

     Linux                   58920481   58920480          0
     LUKS 0 (Data size unknown), 0 B
Partition not added.

recover_EXT2: s_block_group_nr=0/44, s_mnt_count=2/34, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 361428
recover_EXT2: part_size 722856
     Linux                   60326303   61049158     722856 [boot]
     EXT3 Sparse superblock, 370 MB / 352 MiB

LVM2 magic value at 62259924/0/1
part_size 0
     Linux LVM               62259924   62259923          0
     LVM2, 0 B
Partition not added.

block_group_nr 243

recover_EXT2: part_offset problem

LVM2 magic value at 65997356/0/1
part_size 0
     Linux LVM               65997356   65997355          0
     LVM2, 0 B
Partition not added.
BAD_RS LBA=2943449360 127
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0B
     FAT32                 2943449360 3835684840  892235481
This partition ends after the disk limits. (start=2943449360, size=892235481, end=3835684840, disk end=201326592)

     Linux                   70764521   70764520          0
     LUKS 0 (Data size unknown), 0 B
Partition not added.

block_group_nr 1

recover_EXT2: "e2fsck -b 8193 -B 1024 device" may be needed
recover_EXT2: s_block_group_nr=1/44, s_mnt_count=0/34, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 361428
recover_EXT2: part_size 722856
     Linux                   73878125   74600980     722856 [boot]
     EXT3 Sparse superblock Backup superblock, 370 MB / 352 MiB

block_group_nr 343

recover_EXT2: part_offset problem

recover_EXT2: s_block_group_nr=0/768, s_mnt_count=1/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 25165824
recover_EXT2: part_size 201326592
     Linux                  100405656  301732247  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
This partition ends after the disk limits. (start=100405656, size=201326592, end=301732247, disk end=201326592)

recover_EXT2: s_block_group_nr=0/768, s_mnt_count=1/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 25165824
recover_EXT2: part_size 201326592
     Linux                  100405768  301732359  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
This partition ends after the disk limits. (start=100405768, size=201326592, end=301732359, disk end=201326592)

recover_EXT2: s_block_group_nr=0/768, s_mnt_count=1/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 25165824
recover_EXT2: part_size 201326592
     Linux                  100405840  301732431  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
This partition ends after the disk limits. (start=100405840, size=201326592, end=301732431, disk end=201326592)

     Linux                  101794577  101794576          0
     LUKS 0 (Data size unknown), 0 B
Partition not added.
FAT32 at 103302826/0/1
Bad root_cluster
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT12 at 103302827/0/1
FAT1 : 1-9
FAT2 : 10-18
start_rootdir : 19
Data : 33-2879
sectors : 2880
cluster_size : 1
no_of_cluster : 2847 (2 - 2848)
fat_length 9 calculated 9
FAT differs, FAT sectors=0-9/9
heads/cylinder 2 (FAT) != 1 (HD)
sect/track 18 (FAT) != 1 (HD)

FAT12 at 103302827/0/1
     FAT12                  103302827  103305706       2880 [NO NAME]
     FAT12, 1474 KB / 1440 KiB
FAT32 at 103483330/0/1
Bad root_cluster
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT12 at 103483331/0/1
FAT1 : 1-9
FAT2 : 10-18
start_rootdir : 19
Data : 33-2879
sectors : 2880
cluster_size : 1
no_of_cluster : 2847 (2 - 2848)
fat_length 9 calculated 9
FAT differs, FAT sectors=0-9/9
heads/cylinder 2 (FAT) != 1 (HD)
sect/track 18 (FAT) != 1 (HD)

FAT12 at 103483331/0/1
     FAT12                  103483331  103486210       2880 [NO NAME]
     FAT12, 1474 KB / 1440 KiB

block_group_nr 3

recover_EXT2: "e2fsck -b 24577 -B 1024 device" may be needed
recover_EXT2: s_block_group_nr=3/44, s_mnt_count=0/34, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 361428
recover_EXT2: part_size 722856
     Linux                  136959957  137682812     722856 [boot]
     EXT3 Sparse superblock Backup superblock, 370 MB / 352 MiB
     Linux Swap             137695965  139800460    2104496
     SWAP2 version 1, 1077 MB / 1027 MiB

recover_EXT2: s_block_group_nr=0/8, s_mnt_count=1/25, s_blocks_per_group=32768, s_inodes_per_group=7312
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 263064
recover_EXT2: part_size 2104512
     Linux                  139835816  141940327    2104512 [inst]
     EXT3 Large file Sparse superblock, 1077 MB / 1027 MiB

recover_EXT2: s_block_group_nr=0/6, s_mnt_count=11/36, s_blocks_per_group=32496, s_inodes_per_group=28128
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 196788
recover_EXT2: part_size 1574304
     Linux                  141975730  143550033    1574304 [storage]
     EXT3 Large file Sparse superblock Recover, 806 MB / 768 MiB

recover_EXT2: s_block_group_nr=0/42, s_mnt_count=20/27, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 1407687
recover_EXT2: part_size 11261496
     Linux                  143576596  154838091   11261496 [root]
     EXT3 Large file Sparse superblock Recover, 5765 MB / 5498 MiB

recover_EXT2: s_block_group_nr=0/8, s_mnt_count=5/21, s_blocks_per_group=32768, s_inodes_per_group=29680
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 267072
recover_EXT2: part_size 2136576
     Linux                  155032553  157169128    2136576 [log]
     EXT3 Large file Sparse superblock Recover, 1093 MB / 1043 MiB

recover_EXT2: s_block_group_nr=0/4, s_mnt_count=21/26, s_blocks_per_group=32768, s_inodes_per_group=6640
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 132528
recover_EXT2: part_size 1060224
     Linux                  157204566  158264789    1060224 [tmp]
     EXT3 Large file Sparse superblock Recover, 542 MB / 517 MiB
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT12 at 158488060/0/1
FAT1 : 1-9
FAT2 : 10-18
start_rootdir : 19
Data : 33-2879
sectors : 2880
cluster_size : 1
no_of_cluster : 2847 (2 - 2848)
fat_length 9 calculated 9
heads/cylinder 2 (FAT) != 1 (HD)
sect/track 18 (FAT) != 1 (HD)

FAT12 at 158488060/0/1
     FAT12                  158488060  158490939       2880
     FAT12, 1474 KB / 1440 KiB
FAT12 at 158525100/0/1
FAT1 : 1-6
FAT2 : 7-12
start_rootdir : 13
Data : 45-7688
sectors : 7692
cluster_size : 4
no_of_cluster : 1911 (2 - 1912)
fat_length 6 calculated 6
heads/cylinder 64 (FAT) != 1 (HD)
sect/track 32 (FAT) != 1 (HD)

FAT12 at 158525100/0/1
     FAT12                  158525100  158532791       7692 [OCS-EFI]
     FAT12, 3938 KB / 3846 KiB
BAD_RS LBA=3574942274 1019
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 06
     FAT16 >32M            3574942274 4880296993 1305354720
This partition ends after the disk limits. (start=3574942274, size=1305354720, end=585329697, disk end=201326592)
BAD_RS LBA=4249575660 1041
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 01
     FAT12                 4249575660 8397490645 4147914986
This partition ends after the disk limits. (start=4249575660, size=4147914986, end=4102523349, disk end=201326592)
BAD_RS LBA=2579706518 197
check_part_i386 failed for partition type 07
     HPFS - NTFS           2579706518 6241267819 3661561302
This partition ends after the disk limits. (start=2579706518, size=3661561302, end=1946300523, disk end=201326592)
BAD_RS LBA=1599483164 485
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 0B
     FAT32                 1599483164 5796666655 4197183492
This partition ends after the disk limits. (start=1599483164, size=4197183492, end=1501699359, disk end=201326592)
BAD_RS LBA=2477942735 913
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 01
     FAT12                 2477942735 3507448188 1029505454
This partition ends after the disk limits. (start=2477942735, size=1029505454, end=3507448188, disk end=201326592)

block_group_nr 625

recover_EXT2: part_offset problem

block_group_nr 729

recover_EXT2: part_offset problem
Disk /dev/mapper/pve-root - 103 GB / 96 GiB - CHS 201326592 1 1
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (103 GB / 96 GiB) seems too small! (< 4299 GB / 4004 GiB)
The following partitions can't be recovered:
     Linux                  100405656  301732247  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
     Linux                  100405768  301732359  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
     Linux                  100405840  301732431  201326592
     EXT3 Large file Sparse superblock Recover, 103 GB / 96 GiB
     FAT16 LBA              879066043 4232554595 3353488553
     FAT32                 1491115772 5688299263 4197183492
     FAT32                 1599483164 5796666655 4197183492
     FAT12                 2369594287 3399099740 1029505454
     HPFS - NTFS           2470999318 6132560619 3661561302
     FAT12                 2477942735 3507448188 1029505454
     HPFS - NTFS           2579706518 6241267819 3661561302
     FAT32                 2925073112 3817308592  892235481
     FAT32                 2929417976 3821653456  892235481
     FAT32                 2943449360 3835684840  892235481
     FAT16 >32M            3574942274 4880296993 1305354720
     FAT12                 4249575660 8397490645 4147914986
get_geometry_from_list_part_aux head=1 nbr=30
get_geometry_from_list_part_aux head=8 nbr=3

Results
     HPFS - NTFS               582423     588596       6174 [Boot]
     NTFS, 3161 KB / 3087 KiB
     HPFS - NTFS               637823     643996       6174 [Boot]
     NTFS, 3161 KB / 3087 KiB
     Linux                   60326303   61049158     722856 [boot]
     EXT3 Sparse superblock, 370 MB / 352 MiB
     Linux                   73878125   74600980     722856 [boot]
     EXT3 Sparse superblock Backup superblock, 370 MB / 352 MiB
     FAT12                  103302827  103305706       2880 [NO NAME]
     FAT12, 1474 KB / 1440 KiB
     FAT12                  103483331  103486210       2880 [NO NAME]
     FAT12, 1474 KB / 1440 KiB
     Linux                  136959957  137682812     722856 [boot]
     EXT3 Sparse superblock Backup superblock, 370 MB / 352 MiB
     Linux Swap             137695965  139800460    2104496
     SWAP2 version 1, 1077 MB / 1027 MiB
     Linux                  139835816  141940327    2104512 [inst]
     EXT3 Large file Sparse superblock, 1077 MB / 1027 MiB
     Linux                  141975730  143550033    1574304 [storage]
     EXT3 Large file Sparse superblock Recover, 806 MB / 768 MiB
     Linux                  143576596  154838091   11261496 [root]
     EXT3 Large file Sparse superblock Recover, 5765 MB / 5498 MiB
     Linux                  155032553  157169128    2136576 [log]
     EXT3 Large file Sparse superblock Recover, 1093 MB / 1043 MiB
     Linux                  157204566  158264789    1060224 [tmp]
     EXT3 Large file Sparse superblock Recover, 542 MB / 517 MiB
     FAT12                  158488060  158490939       2880
     FAT12, 1474 KB / 1440 KiB
     FAT12                  158525100  158532791       7692 [OCS-EFI]
     FAT12, 3938 KB / 3846 KiB

interface_write()

No partition found or selected for recovery
simulate write!

write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition

TestDisk exited normally.




PS i made sure to check notifaction this time so i will get an email when you reply.
c0mputerking
 
Posts: 4
Joined: 06 Sep 2012, 23:40


Return to Partition Recovery

Who is online

Users browsing this forum: No registered users and 2 guests