cgsecurity.org

Hi, I am having exactly same issue like on http://forum.cgsecurity.org/phpBB3/dama ... d-t61.html.

I accidently deleted partition- 500 GB Hard drive with two partition/Intel.

1st Analyse cylinder search - Out of two partition , one was recovered.
2nd Analyse cylinder search - Getting an "Invalid FAT boot sector" and This following partition can't be recovered error.

HPFS - NTFS 0 1 1 12753 254 63 204892947
check_FAT: can't read FAT boot sector
Invalid FAT boot sector
0 D FAT32 140297 224 27 305976 78 7 2661623918
FAT32 140297 224 27 305976 78 7 2661623918

The harddisk (500 GB / 465 GiB) seems too small! (< 2516 GB / 234
Check the harddisk size: HD jumpers settings, BIOS detection...

The following partition can't be recovered:
Partition Start End Size in sectors
> FAT32 140297 224 27 305976 78 7 2661623918

> I Followed "http://forum.cgsecurity.org/phpBB3/dama ... d-t61.html" and run Advance to Rebuild BS
I get this error- "A valid NTFS Boot sector must be present in order to access any data; even if the partition is not bootable."

Here is the screen shoot:-
TestDisk 6.14-WIP, Data Recovery Utility, September 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 0 1 1 12753 254 63 204892947

Boot sector
Status: OK

Backup boot sector
Status: OK

Sectors are identical.

A valid NTFS Boot sector must be present in order to access
any data; even if the partition is not bootable.

[ Quit ] [ List ] >[Rebuild BS] [Repair MFT] [ Dump ] Rebuild boot sector[/color]

> When Run Rebuild BS
I get - TestDisk 6.14-WIP, Data Recovery Utility, September 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 0 1 1 12753 254 63 204892947

filesystem size 204892947
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
Extrapolated boot sector and current boot sector are identical.
[ Dump ] >[ List ] [ Quit ] List directories and files

Can you help me to recover my data?

Thanks