Warning: the current number of heads per cylinder is 255

TestDisk benutzen um das Dateisystem zu reparieren
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Locked
Message
Author
hoggo
Posts: 1
Joined: 04 Jun 2013, 13:13

Warning: the current number of heads per cylinder is 255

#1 Post by hoggo »

hallo zusammen,

ich habe heute das Programm ausprobiert in der Hoffung es kann mir bei einem Windows 7 wieder zum Starten helfen...

leider kann ich auf der Webseite von cgsecurity.org nicht finden was ich in meinem Fall tun muss...
hier das Ergebnis:

Analyse:

Disk /dev/sdg - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
>* HPFS - NTFS 0 1 1 60801 254 63 976784067

Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue

Quick Search:

Disk /dev/sdg - 500 GB / 465 GiB - CHS 60801 255 63

Warning: the current number of heads per cylinder is 255
but the correct value may be 16.
You can use the Geometry menu to change this value.
It's something to try if
- some partitions are not found by TestDisk
- or the partition table can not be written because partitions overlaps.


dann wäre continue... aber wie weiter?

es wäre suuuuuper wenn mir jemand helfen könnte... vielen Dank.
hoggo







[ Continue ]

Locked