Systempartition beschädigt, Windows bootet nicht mehr

TestDisk benutzen um das Dateisystem zu reparieren
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Locked
Message
Author
SvenRh
Posts: 1
Joined: 16 Feb 2014, 00:44

Systempartition beschädigt, Windows bootet nicht mehr

#1 Post by SvenRh »

Hallo,

ich habe ein Notebook, dessen Festplatte wie folgt partitioniert ist:

Code: Select all

turtle ~ # fdisk -l

Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x27ae27ae

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        3648    29302528+   7  HPFS/NTFS
/dev/hda2            3649       14593    87915712+   5  Extended
/dev/hda5            3649        7296    29302528+   7  HPFS/NTFS
/dev/hda6            7297       10944    29302528+   7  HPFS/NTFS
/dev/hda7           10945       11069     1004031   82  Linux swap / Solaris
/dev/hda8   *       11070       11078       72261   83  Linux
/dev/hda9           11079       11687     4891761   83  Linux
/dev/hda10          11688       12904     9775521   83  Linux
/dev/hda11          12905       14593    13566861    b  W95 FAT32
turtle ~ # 
In hda1 sitzt Windows XP, hda10 (/) beherbergt zusammen mit hda8 (/boot) und hda9 (/home) Gentoo Linux. Auf hda5, hda6 und hda11 liegen meine persönlichen Daten. Den Dual-Boot von Windows und Linux habe ich mit GNU Grub realisiert.

Nun stehe ich vor folgendem Problem: Gestern Abend habe ich mein Notebook unter Windows in den Ruhezustand versetzt und es heute Vormittag wieder eingeschaltet. Nachdem ich im Grub-Menü Windows ausgewählt habe, erscheint nun jedoch - statt des beim Aufwachen aus dem Ruhezustand üblichen Ladebalkens - folgende Fehlermeldung:

Code: Select all

Fehler beim Laden des Datenträgers
Neustart mit Strg+Alt+Entf
Nach dem angebotenen Neustart findet das BIOS jedoch meine Festplatte gar nicht mehr ("Auto-Detecting Pri Master ... Not Detected"), versucht dann noch den Boot vom (leeren) CD-Laufwerk und per PXE und hält mangels Boot-Medium dann an.

Nach jedem Kaltstart des Systems kann ich den gesamten Ablauf bis hierher beliebig oft ohne anderes Ergebnis reproduzieren.

Wähle ich im Grub-Menü Linux aus, fährt dieses ohne Probleme hoch. Nach dem Boot in Linux probiere ich, die Problempartition zu mounten (/mnt/windows/system/ ist in der /etc/fstab als Mountpoint für /dev/hda1 festgelegt):

Code: Select all

sven@turtle ~ $ mount /mnt/windows/system/
mount: wrong fs type, bad option, bad superblock on /dev/hda1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so
sven@turtle ~ $ 
Ein Blick ins Protokoll brachte diese umfängliche Liste von Fehlern im Zusammenhang mit dem Mount-Versuch zum Vorschein:

Code: Select all

sven@turtle ~ $ dmesg
[...]
[  295.227012] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  295.227020] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291527, high=0, low=6291527, sector=6291527
[  295.227035] ide: failed opcode was: unknown
[  295.227040] end_request: I/O error, dev hda, sector 6291527
[  295.227044] printk: 3 messages suppressed.
[  295.227047] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008.
[  297.736136] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  297.736143] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291528, high=0, low=6291528, sector=6291528
[  297.736159] ide: failed opcode was: unknown
[  297.736163] end_request: I/O error, dev hda, sector 6291528
[  297.736169] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600009.
[  300.145342] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  300.145349] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291529, high=0, low=6291529, sector=6291529
[  300.145364] ide: failed opcode was: unknown
[  300.145367] end_request: I/O error, dev hda, sector 6291529
[  300.145372] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000a.
[  302.554547] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  302.554554] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291530, high=0, low=6291530, sector=6291530
[  302.554569] ide: failed opcode was: unknown
[  302.554572] end_request: I/O error, dev hda, sector 6291530
[  302.554577] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000b.
[  304.963757] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  304.963764] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291531, high=0, low=6291531, sector=6291531
[  304.963779] ide: failed opcode was: unknown
[  304.963782] end_request: I/O error, dev hda, sector 6291531
[  304.963787] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000c.
[  307.583905] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  307.583912] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291532, high=0, low=6291532, sector=6291532
[  307.583927] ide: failed opcode was: unknown
[  307.583930] end_request: I/O error, dev hda, sector 6291532
[  307.583936] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000d.
[  310.192952] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  310.192959] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291533, high=0, low=6291533, sector=6291533
[  310.192974] ide: failed opcode was: unknown
[  310.192977] end_request: I/O error, dev hda, sector 6291533
[  310.192983] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000e.
[  312.801998] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  312.802006] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291534, high=0, low=6291534, sector=6291534
[  312.802021] ide: failed opcode was: unknown
[  312.802025] end_request: I/O error, dev hda, sector 6291534
[  312.802031] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000f.
[  315.522071] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  315.522078] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291527, high=0, low=6291527, sector=6291527
[  315.522093] ide: failed opcode was: unknown
[  315.522097] end_request: I/O error, dev hda, sector 6291527
[  315.522103] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008.
[  317.931284] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  317.931291] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291528, high=0, low=6291528, sector=6291528
[  317.931305] ide: failed opcode was: unknown
[  317.931309] end_request: I/O error, dev hda, sector 6291528
[  317.931314] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600009.
[  320.340486] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  320.340493] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291529, high=0, low=6291529, sector=6291529
[  320.340508] ide: failed opcode was: unknown
[  320.340511] end_request: I/O error, dev hda, sector 6291529
[  320.340516] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000a.
[  322.960634] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  322.960640] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291530, high=0, low=6291530, sector=6291530
[  322.960655] ide: failed opcode was: unknown
[  322.960659] end_request: I/O error, dev hda, sector 6291530
[  322.960664] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000b.
[  325.569675] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  325.569682] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291531, high=0, low=6291531, sector=6291531
[  325.569697] ide: failed opcode was: unknown
[  325.569702] end_request: I/O error, dev hda, sector 6291531
[  325.569707] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000c.
[  328.178719] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  328.178726] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291532, high=0, low=6291532, sector=6291532
[  328.178741] ide: failed opcode was: unknown
[  328.178745] end_request: I/O error, dev hda, sector 6291532
[  328.178749] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000d.
[  330.787763] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  330.787770] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291533, high=0, low=6291533, sector=6291533
[  330.787786] ide: failed opcode was: unknown
[  330.787789] end_request: I/O error, dev hda, sector 6291533
[  330.787794] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000e.
[  333.396807] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[  333.396814] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6291534, high=0, low=6291534, sector=6291534
[  333.396828] ide: failed opcode was: unknown
[  333.396832] end_request: I/O error, dev hda, sector 6291534
[  333.396837] NTFS-fs error (device hda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000f.
[  333.397637] NTFS-fs error (device hda1): map_mft_record(): Failed with error code 5.
sven@turtle ~ $ 
Sodann habe ich das im TestDisk-Wiki beschriebene Prozedere durchlaufen; das (um einige Auflistungen privater Dateien auf den funktionierenden Partitionen bereinigte) Logfile sieht so aus:

Code: Select all


Sat Feb 15 22:53:56 2014
Command line: TestDisk

TestDisk 6.13, Data Recovery Utility, November 2011
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Linux, kernel 3.2.0-23-generic (#36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012) i686
Compiler: GCC 4.6
Compilation date: 2012-02-05T07:16:54
ext2fs lib: 1.42, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size       234441648 sectors
/dev/sda: user_max   234441648 sectors
/dev/sda: native_max 234441648 sectors
/dev/sda: dco        234441648 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512
Hard disk list
Disk /dev/sda - 120 GB / 111 GiB - CHS 14593 255 63, sector size=512 - SAMSUNG HM120JC, S/N:S0A0J10L605142, FW:YL100-13
Disk /dev/sdb - 4043 MB / 3856 MiB - CHS 5317 33 45, sector size=512 - UDISK PDU01_4G 91I2.0, FW:0.00

Partition table type (auto): Intel
Disk /dev/sda - 120 GB / 111 GiB - SAMSUNG HM120JC
Partition table type: Intel

Analyse Disk /dev/sda - 120 GB / 111 GiB - CHS 14593 255 63
Geometry from i386 MBR: head=255 sector=63
NTFS at 0/1/1
file_pread(4,4096,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/output error
NTFS: Can't read MFT
NTFS at 3648/1/1
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
NTFS at 7296/1/1

ReiserFS Marker at 11078/1/1

ReiserFS Marker at 11687/1/1
FAT32 at 12904/1/1
Info: size boot_sector 27133722, partition 27133722
FAT1 : 32-13267
FAT2 : 13268-26503
start_rootdir : 26504 root cluster : 2
Data : 26504-27133719
sectors : 27133722
cluster_size : 16
no_of_cluster : 1694201 (2 - 1694202)
fat_length 13236 calculated 13236
get_geometry_from_list_part_aux head=255 nbr=30
get_geometry_from_list_part_aux head=8 nbr=15
get_geometry_from_list_part_aux head=16 nbr=11
get_geometry_from_list_part_aux head=32 nbr=11
get_geometry_from_list_part_aux head=64 nbr=11
get_geometry_from_list_part_aux head=128 nbr=3
get_geometry_from_list_part_aux head=240 nbr=11
get_geometry_from_list_part_aux head=255 nbr=30
Current partition structure:
 1 * HPFS - NTFS              0   1  1  3647 254 63   58605057
 2 E extended              3648   0  1 14592 254 63  175831425
 5 L HPFS - NTFS           3648   1  1  7295 254 63   58605057
   X extended              7296   0  1 10943 254 63   58605120
 6 L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
   X extended             10944   0  1 11068 254 63    2008125
 7 L Linux Swap           10944   1  1 11068 254 63    2008062
   X extended             11069   0  1 11077 254 63     144585
Logical partition must not be bootable
 8 L Linux                11069   1  1 11077 254 63     144522
   X extended             11078   0  1 11686 254 63    9783585
 9 L Linux                11078   1  1 11686 254 63    9783522
   X extended             11687   0  1 12903 254 63   19551105
10 L Linux                11687   1  1 12903 254 63   19551042
   X extended             12904   0  1 14592 254 63   27133785
11 L FAT32                12904   1  1 14592 254 63   27133722 [RESERVE]
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0

search_part()
Disk /dev/sda - 120 GB / 111 GiB - CHS 14593 255 63
NTFS at 0/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
NTFS at 3648/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
NTFS at 7296/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
     Linux Swap           10944   1  1 11068 254 41    2008040
     SWAP2 version 1, 1028 MB / 980 MiB

recover_EXT2: s_block_group_nr=0/8, s_mnt_count=2/24, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 72260
recover_EXT2: part_size 144520
     Linux                11069   1  1 11077 254 61     144520
     EXT2 Sparse superblock, 73 MB / 70 MiB

ReiserFS Marker at 11078/1/1

recover_rfs
block_count=1222928
block_size=4096
     Linux                11078   1  1 11686 253 28    9783424
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB

ReiserFS Marker at 11687/1/1

recover_rfs
block_count=2443872
block_size=4096
     Linux                11687   1  1 12903 253 60   19550976
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
FAT32 at 12904/1/1
FAT1 : 32-13267
FAT2 : 13268-26503
start_rootdir : 26504 root cluster : 2
Data : 26504-27133719
sectors : 27133722
cluster_size : 16
no_of_cluster : 1694201 (2 - 1694202)
fat_length 13236 calculated 13236

FAT32 at 12904/1/1
     FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
get_geometry_from_list_part_aux head=255 nbr=14
get_geometry_from_list_part_aux head=8 nbr=8
get_geometry_from_list_part_aux head=16 nbr=7
get_geometry_from_list_part_aux head=32 nbr=7
get_geometry_from_list_part_aux head=64 nbr=7
get_geometry_from_list_part_aux head=128 nbr=2
get_geometry_from_list_part_aux head=240 nbr=7
get_geometry_from_list_part_aux head=255 nbr=14

Results
   * HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
   L HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
   L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
   L Linux Swap           10944   1  1 11068 254 63    2008062
     SWAP2 version 1, 1028 MB / 980 MiB
   L Linux                11069   1  1 11077 254 63     144522
     EXT2 Sparse superblock, 73 MB / 70 MiB
   L Linux                11078   1  1 11686 254 63    9783522
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB
   L Linux                11687   1  1 12903 254 63   19551042
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
   L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
ntfs_device_testdisk_io_ioctl() unimplemented
file_pread(4,16,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/outpError reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Failed to startup volume: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Failed to startup volume: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Error reading $Mft record(s): Input/output error.
ut error
ntfs_device_testdisk_io_ioctl() unimplemented
Not an exFAT boot sector.
ntfs_device_testdisk_io_ioctl() unimplemented
ntfs_device_testdisk_io_ioctl() unimplemented

   * HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
Can't open filesystem. Filesystem seems damaged.
ntfs_device_testdisk_io_ioctl() unimplemented


dir_partition inode=5
   L HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
file_pread(4,16,buffer,64896697(4039/161/20)) read err: Input/output error
file_pread(4,1,buffer,64896697(4039/161/20)) read err: Input/output error
ntfs_readdir failed
Directory /

	... Dateiliste ...

ntfs_device_testdisk_io_ioctl() unimplemented


dir_partition inode=5
   L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
Directory /

	... Dateiliste ...


dir_partition inode=2
   L Linux                11069   1  1 11077 254 63     144522
     EXT2 Sparse superblock, 73 MB / 70 MiB
Directory /

	... Dateiliste ...

   L Linux                11078   1  1 11686 254 63    9783522
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB
Support for this filesystem hasn't been enable during compilation.

   L Linux                11687   1  1 12903 254 63   19551042
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
Support for this filesystem hasn't been enable during compilation.


dir_partition inode=0
   L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
FAT: cluster=2(0x2), pos=207329327
Directory /

	... Dateiliste ...

interface_write()
 1 * HPFS - NTFS              0   1  1  3647 254 63   58605057
 2 E extended LBA          3648   0  1 14592 254 63  175831425
 5 L HPFS - NTFS           3648   1  1  7295 254 63   58605057
 6 L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
 7 L Linux Swap           10944   1  1 11068 254 63    2008062
 8 L Linux                11069   1  1 11077 254 63     144522
 9 L Linux                11078   1  1 11686 254 63    9783522
10 L Linux                11687   1  1 12903 254 63   19551042
11 L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]

search_part()
Disk /dev/sda - 120 GB / 111 GiB - CHS 14593 255 63
NTFS at 0/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
NTFS at 3647/254/63
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS found using backup sector!, 30 GB / 27 GiB
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
NTFS at 3648/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
NTFS at 7295/254/63
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
file_pread(4,4096,buffer,64896639(4039/160/25)) read err: Partial read
file_pread(4,1,buffer,64896696(4039/161/19)) read err: Input/output error
NTFS: Can't read MFT
     HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS found using backup sector!, 30 GB / 27 GiB
NTFS at 7296/1/1
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
NTFS at 10943/254/63
filesystem size           58605057
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               3662816
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS found using backup sector!, 30 GB / 27 GiB
     Linux Swap           10944   1  1 11068 254 41    2008040
     SWAP2 version 1, 1028 MB / 980 MiB

recover_EXT2: s_block_group_nr=0/8, s_mnt_count=2/24, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 72260
recover_EXT2: part_size 144520
     Linux                11069   1  1 11077 254 61     144520
     EXT2 Sparse superblock, 73 MB / 70 MiB

block_group_nr 3

recover_EXT2: "e2fsck -b 24577 -B 1024 device" may be needed
recover_EXT2: s_block_group_nr=3/8, s_mnt_count=0/24, s_blocks_per_group=8192, s_inodes_per_group=2008
recover_EXT2: s_blocksize=1024
recover_EXT2: s_blocks_count 72260
recover_EXT2: part_size 144520
     Linux                11069   1  1 11077 254 61     144520
     EXT2 Sparse superblock Backup superblock, 73 MB / 70 MiB

ReiserFS Marker at 11078/1/1

recover_rfs
block_count=1222928
block_size=4096
     Linux                11078   1  1 11686 253 28    9783424
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB

ReiserFS Marker at 11687/1/1

recover_rfs
block_count=2443872
block_size=4096
     Linux                11687   1  1 12903 253 60   19550976
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
FAT32 at 12904/1/1
FAT1 : 32-13267
FAT2 : 13268-26503
start_rootdir : 26504 root cluster : 2
Data : 26Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Failed to startup volume: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Failed to startup volume: Input/output error.
Error reading $MFT: Input/output error.
ntfs_mft_load(): Failed.
Failed to load $MFT: Input/output error.
Error reading $Mft record(s): Input/output error.
504-27133719
sectors : 27133722
cluster_size : 16
no_of_cluster : 1694201 (2 - 1694202)
fat_length 13236 calculated 13236

FAT32 at 12904/1/1
     FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
FAT32 at 12904/1/7
FAT1 : 32-13267
FAT2 : 13268-26503
start_rootdir : 26504 root cluster : 2
Data : 26504-27133719
sectors : 27133722
cluster_size : 16
no_of_cluster : 1694201 (2 - 1694202)
fat_length 13236 calculated 13236
set_FAT_info: name from BS used

FAT32 at 12904/1/7
     FAT32 LBA            12904   1  1 14592 254 63   27133722 [NO NAME]
     FAT found using backup sector!, 13 GB / 12 GiB
get_geometry_from_list_part_aux head=255 nbr=14
get_geometry_from_list_part_aux head=8 nbr=8
get_geometry_from_list_part_aux head=16 nbr=7
get_geometry_from_list_part_aux head=32 nbr=7
get_geometry_from_list_part_aux head=64 nbr=7
get_geometry_from_list_part_aux head=128 nbr=2
get_geometry_from_list_part_aux head=240 nbr=7
get_geometry_from_list_part_aux head=255 nbr=14

Results
   * HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
   L HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
   L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
   L Linux Swap           10944   1  1 11068 254 63    2008062
     SWAP2 version 1, 1028 MB / 980 MiB
   L Linux                11069   1  1 11077 254 63     144522
     EXT2 Sparse superblock, 73 MB / 70 MiB
   L Linux                11078   1  1 11686 254 63    9783522
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB
   L Linux                11687   1  1 12903 254 63   19551042
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
   L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
ntfs_device_testdisk_io_ioctl() unimplemented
file_pread(4,16,buffer,6291519(391/160/25)) read err: Partial read
file_pread(4,1,buffer,6291520(391/160/26)) read err: Input/output error
ntfs_device_testdisk_io_ioctl() unimplemented
Not an exFAT boot sector.
ntfs_device_testdisk_io_ioctl() unimplemented
ntfs_device_testdisk_io_ioctl() unimplemented

   * HPFS - NTFS              0   1  1  3647 254 63   58605057
     NTFS, 30 GB / 27 GiB
Can't open filesystem. Filesystem seems damaged.
ntfs_device_testdisk_io_ioctl() unimplemented


dir_partition inode=5
   L HPFS - NTFS           3648   1  1  7295 254 63   58605057
     NTFS, 30 GB / 27 GiB
file_pread(4,16,buffer,64896697(4039/161/20)) read err: Input/output error
file_pread(4,1,buffer,64896697(4039/161/20)) read err: Input/output error
ntfs_readdir failed
Directory /

	... Dateiliste ...

ntfs_device_testdisk_io_ioctl() unimplemented


dir_partition inode=5
   L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
     NTFS, 30 GB / 27 GiB
Directory /

	... Dateiliste ...


dir_partition inode=2
   L Linux                11069   1  1 11077 254 63     144522
     EXT2 Sparse superblock, 73 MB / 70 MiB
Directory /

	... Dateiliste ...

   L Linux                11078   1  1 11686 254 63    9783522
     ReiserFS 3.6 with standard journal, 5009 MB / 4777 MiB
Support for this filesystem hasn't been enable during compilation.

   L Linux                11687   1  1 12903 254 63   19551042
     ReiserFS 3.6 with standard journal, 10010 MB / 9546 MiB
Support for this filesystem hasn't been enable during compilation.


dir_partition inode=0
   L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
     FAT32, 13 GB / 12 GiB
FAT: cluster=2(0x2), pos=207329327
Directory /

	... Dateiliste ...

interface_write()
 1 * HPFS - NTFS              0   1  1  3647 254 63   58605057
 2 E extended LBA          3648   0  1 14592 254 63  175831425
 5 L HPFS - NTFS           3648   1  1  7295 254 63   58605057
 6 L HPFS - NTFS           7296   1  1 10943 254 63   58605057 [Internetdaten]
 7 L Linux Swap           10944   1  1 11068 254 63    2008062
 8 L Linux                11069   1  1 11077 254 63     144522
 9 L Linux                11078   1  1 11686 254 63    9783522
10 L Linux                11687   1  1 12903 254 63   19551042
11 L FAT32 LBA            12904   1  1 14592 254 63   27133722 [RESERVE]
simulate write!

write_mbr_i386: starting...
write_all_log_i386: starting...
write_all_log_i386: CHS: 3648/0/1,lba=58605120
write_all_log_i386: CHS: 7296/0/1,lba=117210240
write_all_log_i386: CHS: 10944/0/1,lba=175815360
write_all_log_i386: CHS: 11069/0/1,lba=177823485
write_all_log_i386: CHS: 11078/0/1,lba=177968070
write_all_log_i386: CHS: 11687/0/1,lba=187751655
write_all_log_i386: CHS: 12904/0/1,lba=207302760

TestDisk exited normally.
(Das Hochladen des Logfile hat leider nicht funktioniert; ich erhalte die Fehlermeldung "Die Dateierweiterung log ist nicht erlaubt.")

Was ist hier kaputt und wie bekomme ich meine Systempartition wieder ans Laufen? (Windows neu zu installieren wäre vermutlich die einfachste Lösung, aber das würde ich ob des damit verbundenen erheblichen Zeitaufwands für zahllose Updates, exzessive Konfiguration und Installation zahlloser weiterer benötigter Software gerne vermeiden ...)

Locked