SD-Karte zeigt keine Dateien mehr an

PhotoRec benutzen um verlorene Dateien wiederherzustellen
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Locked
Message
Author
anbaum
Posts: 2
Joined: 14 Mar 2018, 16:44

SD-Karte zeigt keine Dateien mehr an

#1 Post by anbaum »

Hallo!
Ich habe ein Problem mit einer 32GB SDHC-Karte (von Transcend), bei der ich nicht mehr auf die darauf abgespeicherten (größtenteils) Bilddateien zugreifen kann. Durch Photorec und mit hilfe dieses genialen Forums konnte ich schon einen großen Teil der Fotos retten, es fehlen aber bisher noch die zuletzt aufgenommenen Bilder, die leider am wichtigsten sind (es ist die Speicherkarte unserer Schulkamera). Ich bin absoluter Amateur was Datenrettung etc. angeht, daher wäre ich für jegliche Hilfe sehr dankbar!

Ich versuche mal möglichst viele Infos zum Problem zu geben:

1. Kamera (Sony Alpha 5) und Windows (Fehlermeldung "Sie müssen den Datenträger im Laufwerk F: formatieren, befor sie ihn verwenden können" und "Auf F:\ kann nicht zugegriffen werden. Auf dem Datenträger befindet sich kein erkanntes Dateisystem...) können nicht auf die Dateien zugreifen.

2. Partitionen sind meins Wissens nicht auf der Speicherkarte angelegt.

3. Programme wie Recuva können nicht auf die Karte zugreifen.

4. Photorec konnte Bilder wiederherstellen, jedoch nicht alle (die aktuellsten fehlen noch).

5. Chkdsk meldet "Der Typ des Dateisystems ist RAW." und kann nicht drauf zugreifen.

6. Bei Testdisk habe ich mit Anleitung aus verschiedenen Forumsbeiträgen bisher folgendes versucht (leider meist ohne wirklich zu wissen, was ich da tue):
- Analyse(-Versuche) mit Einstellung partition table type "none" hat keine Partitionen gefunden und bei der Einstellung "Intel" kam die Meldung "Partition sector doesn't have the endmark
0xAA55"

- bei dem Punkt Advanced und der Einstellung partition table "none", type "ntfs" kam die Meldung "Boot sector Status: Bad, Backup boot sector Status: Bad, Sectors are identical. A valid NTFS Boot sector must be present in order to access any data; even if the partition is not bootable."

- beim Punkt Advanced und der Einstellung partition table "none", type "Fat32" kam die Meldung "Boot sector Bad, Backup boot sector Bad, First sectors (Boot code and partition information) are not identical. Second sectors (cluster information) are not identical. Third sectors (Second part of boot code) are not identical. A valid FAT Boot sector must be present in order to access any data; even if the partition is not bootable."

Mehr trau ich mich ohne fachmännische Anleitung nicht (ist wahrscheinlich auch besser so...)

Ich hänge noch die Testdisk-Log-Datei an, vielleicht gibt die noch mehr Einblicke.

Schonmal vielen Dank für alle Hilfversuche!!!

Viele Grüße

Andreas



Testdisk-Log-File:

Wed Mar 14 15:56:25 2018
Command line: TestDisk

TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=128035676160
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdc)=32504807424
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=128035676160
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=32504807424
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=113472700416
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=1000202043392
filewin32_getfilesize(\\.\E:) GetFileSize err Unzulässige Funktion.

filewin32_setfilepointer(\\.\E:) SetFilePointer err Unzulässige Funktion.

Warning: can't get size for \\.\E:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=32500613120
Hard disk list
Disk /dev/sda - 128 GB / 119 GiB - CHS 15566 255 63, sector size=512
Disk /dev/sdb - 1000 GB / 931 GiB - CHS 121601 255 63, sector size=512
Disk /dev/sdc - 32 GB / 30 GiB - CHS 3951 255 63, sector size=512
Drive C: - 113 GB / 105 GiB - CHS 13795 255 63, sector size=512
Drive D: - 1000 GB / 931 GiB - CHS 121600 255 63, sector size=512
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63, sector size=512

Partition table type default to None
Drive F: - 32 GB / 30 GiB
Partition table type: None
Partition table type default to None
Drive F: - 32 GB / 30 GiB
Partition table type: None

Analyse Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Current partition structure:
P Unknown 0 0 1 3951 78 31 63477760

search_part()
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Search for partition aborted

Results

interface_write()

No partition found or selected for recovery

search_part()
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Search for partition aborted

Results

interface_write()

No partition found or selected for recovery

Analyse Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Current partition structure:
P Unknown 0 0 1 3951 78 31 63477760

search_part()
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Search for partition aborted

Results

interface_write()

No partition found or selected for recovery

search_part()
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Search for partition aborted

Results

interface_write()

No partition found or selected for recovery
Partition table type default to None
Drive F: - 32 GB / 30 GiB
Partition table type: Intel

Analyse Drive F: - 32 GB / 30 GiB - CHS 3951 255 63
Current partition structure:

Partition sector doesn't have the endmark 0xAA55

search_part()
Drive F: - 32 GB / 30 GiB - CHS 3951 255 63

Results

interface_write()

No partition found or selected for recovery
simulate write!

write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition

Interface Advanced
Partition table type default to None
Drive F: - 32 GB / 30 GiB
Partition table type: None

Interface Advanced
P Unknown 0 0 1 3951 78 31 63477760
Change partition type:
P NTFS 0 0 1 3951 78 31 63477760

ntfs_boot_sector
P NTFS 0 0 1 3951 78 31 63477760
filesystem size 1
sectors_per_cluster 0
mft_lcn 268435567
mftmirr_lcn 0
clusters_per_mft_record 0
clusters_per_index_record 0
Boot sector
Status: Bad

Backup boot sector
Status: Bad

Sectors are identical.

A valid NTFS Boot sector must be present in order to access
any data; even if the partition is not bootable.
Change partition type:
P NTFS 0 0 1 3951 78 31 63477760

ntfs_boot_sector
P NTFS 0 0 1 3951 78 31 63477760
filesystem size 1
sectors_per_cluster 0
mft_lcn 268435567
mftmirr_lcn 0
clusters_per_mft_record 0
clusters_per_index_record 0
Boot sector
Status: Bad

Backup boot sector
Status: Bad

Sectors are identical.

A valid NTFS Boot sector must be present in order to access
any data; even if the partition is not bootable.
Change partition type:
P FAT32 0 0 1 3951 78 31 63477760

fat32_boot_sector
P FAT32 0 0 1 3951 78 31 63477760
Boot sector
Bad

Backup boot sector
Bad

First sectors (Boot code and partition information) are not identical.
Second sectors (cluster information) are not identical.
Third sectors (Second part of boot code) are not identical.

A valid FAT Boot sector must be present in order to access
any data; even if the partition is not bootable.

TestDisk exited normally.

Locked