Suite a un crash d'une machine une erreur est apparue lors du démarrage
ahci port0 device error
et l'ordi refuse de démarrer quelque soit le disque bootable utilisé
j'ai donc place le disque dur ( seagate barracuda ST31000528AS ) 1To dans un boitier externe.
Sous Windows 7 le disque apparait en raw de 32Go
Après avoir lancer un testdisk je suis content il retrouve toutes les partitions.
malheureusement tout s'arrête la
Apres l'analyse ca me dis qu'il ne peut pas restaurer les partitions parce que le disque est trop petit
En effet comme le disque en reconnue comme un 32Go pas moyen de restaurer 1To
j'ai essayer de modifier la géométrie en me basant sur la doc seagate
http://www.seagate.com/staticfiles/supp ... 29369h.pdf
mais il ne fais que 138Go
j'ai changé le nombre de cylindre 4111 par celui de la doc
Default cylinders 16,383
c'est certainement pas le bon chiffre
quelqu'un pourrais m'aider m'aider s'il vous plais?
Code: Select all
Thu Jun 21 14:29:54 2012
Command line: TestDisk
TestDisk 6.14-WIP, Data Recovery Utility, May 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7601) SP1
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-06-18T11:00:46
ext2fs lib: 1.42.2, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=64023257088
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=33820284928
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=64023257088
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=33820284928
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=64021159936
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=33820284928
Hard disk list
Disk /dev/sda - 64 GB / 59 GiB - CHS 7783 255 63, sector size=512 - SanDisk SSD P4 64GB, S/N:114115038794, FW:SSD
Disk /dev/sdb - 33 GB / 31 GiB - CHS 4111 255 63, sector size=512 - Initio INIC-1610P, S/N:9VP3TZDC, FW:1.03
Partition table type (auto): Intel
Disk /dev/sdb - 33 GB / 31 GiB - Initio INIC-1610P
Partition table type: Intel
Analyse Disk /dev/sdb - 33 GB / 31 GiB - CHS 4111 255 63
Geometry from i386 MBR: head=255 sector=63
check_part_i386 1 type DE: no test
NTFS at 15/10/60
NTFS at 1269/184/4
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Current partition structure:
1 P Dell Utility 0 1 1 14 254 63 240912
2 * HPFS - NTFS 15 10 60 1269 184 3 20156416 [RECOVERY]
3 P HPFS - NTFS 1269 184 4 121601 25 24 1933123584 [OS]
search_vista_part: 1
search_part()
Disk /dev/sdb - 33 GB / 31 GiB - CHS 4111 255 63
FAT16 at 0/1/1
FAT1 : 1-235
FAT2 : 236-470
start_rootdir : 471
Data : 503-240910
sectors : 240912
cluster_size : 4
no_of_cluster : 60102 (2 - 60103)
fat_length 235 calculated 235
FAT16 at 0/1/1
FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
FAT32 at 15/0/1
FAT1 : 32-8229
FAT2 : 8230-16427
start_rootdir : 16428 root cluster : 2
Data : 16428-67119531
sectors : 67119570
cluster_size : 64
no_of_cluster : 1048486 (2 - 1048487)
fat_length 8198 calculated 8192
FAT differs, FAT sectors=0-16/8198
set_FAT_info: name from BS used
FAT32 at 15/0/1
FAT32 LBA 15 0 1 4192 254 63 67119570 [ Unlabeled]
FAT32, blocksize=32768, 34 GB / 32 GiB
This partition ends after the disk limits. (start=240975, size=67119570, end=67360544, disk end=66055244)
NTFS at 15/10/60
filesystem size 20156416
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 15 10 60 1269 184 3 20156416 [RECOVERY]
NTFS, blocksize=4096, 10320 MB / 9842 MiB
NTFS at 1269/184/4
filesystem size 1933123584
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 1269 184 4 121601 25 24 1933123584 [OS]
NTFS, blocksize=4096, 989 GB / 921 GiB
This partition ends after the disk limits. (start=20398080, size=1933123584, end=1953521663, disk end=66055244)
file_pread(5,16,buffer,28641343(1782/214/32)) ReadFile Le délai de temporisation de sémaphore a expiré.
Search for partition aborted
Disk /dev/sdb - 33 GB / 31 GiB - CHS 4111 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (33 GB / 31 GiB) seems too small! (< 1000 GB / 931 GiB)
The following partitions can't be recovered:
FAT32 LBA 15 0 1 4192 254 63 67119570 [ Unlabeled]
FAT32, blocksize=32768, 34 GB / 32 GiB
HPFS - NTFS 1269 184 4 121601 25 24 1933123584 [OS]
NTFS, blocksize=4096, 989 GB / 921 GiB
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Results
* FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
P HPFS - NTFS 15 10 60 1269 184 3 20156416 [RECOVERY]
NTFS, blocksize=4096, 10320 MB / 9842 MiB
interface_write()
1 * FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
2 P HPFS - NTFS 15 10 60 1269 184 3 20156416 [RECOVERY]
search_part()
Disk /dev/sdb - 33 GB / 31 GiB - CHS 4111 255 63
FAT16 at 0/1/1
FAT1 : 1-235
FAT2 : 236-470
start_rootdir : 471
Data : 503-240910
sectors : 240912
cluster_size : 4
no_of_cluster : 60102 (2 - 60103)
fat_length 235 calculated 235
FAT16 at 0/1/1
FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
Search for partition aborted
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Results
* FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
interface_write()
1 * FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
New geometry
Disk /dev/sdb - 134 GB / 125 GiB - CHS 16383 255 63 sector_size=512
Analyse Disk /dev/sdb - 134 GB / 125 GiB - CHS 16383 255 63
Geometry from i386 MBR: head=255 sector=63
check_part_i386 1 type DE: no test
NTFS at 15/10/60
NTFS at 1269/184/4
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Current partition structure:
1 P Dell Utility 0 1 1 14 254 63 240912
2 * HPFS - NTFS 15 10 60 1269 184 3 20156416 [RECOVERY]
3 P HPFS - NTFS 1269 184 4 121601 25 24 1933123584 [OS]
Backup partition structure
partition_save
search_vista_part: 1
search_part()
Disk /dev/sdb - 134 GB / 125 GiB - CHS 16383 255 63
FAT16 at 0/1/1
FAT1 : 1-235
FAT2 : 236-470
start_rootdir : 471
Data : 503-240910
sectors : 240912
cluster_size : 4
no_of_cluster : 60102 (2 - 60103)
fat_length 235 calculated 235
FAT16 at 0/1/1
FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
FAT32 at 15/0/1
FAT1 : 32-8229
FAT2 : 8230-16427
start_rootdir : 16428 root cluster : 2
Data : 16428-67119531
sectors : 67119570
cluster_size : 64
no_of_cluster : 1048486 (2 - 1048487)
fat_length 8198 calculated 8192
FAT differs, FAT sectors=0-16/8198
set_FAT_info: name from BS used
FAT32 at 15/0/1
FAT32 LBA 15 0 1 4192 254 63 67119570 [ Unlabeled]
FAT32, blocksize=32768, 34 GB / 32 GiB
file_pread(5,8,buffer,67360545(4193/0/1)) lseek err Invalid argument
file_pread(5,1,buffer,67360545(4193/0/1)) lseek err Invalid argument
file_pread(5,8,buffer,67360553(4193/0/9)) lseek err Invalid argument
file_pread(5,3,buffer,67360561(4193/0/17)) lseek err Invalid argument
file_pread(5,3,buffer,67360608(4193/1/1)) lseek err Invalid argument
file_pread(5,8,buffer,67360624(4193/1/17)) lseek err Invalid argument
file_pread(5,11,buffer,67360671(4193/2/1)) lseek err Invalid argument
file_pread(5,2,buffer,67362593(4193/32/33)) lseek err Invalid argument
get_geometry_from_list_part_aux head=255 nbr=4
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=4
Results
* FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
FAT16, blocksize=2048, 123 MB / 117 MiB
P FAT32 LBA 15 0 1 4192 254 63 67119570 [ Unlabeled]
FAT32, blocksize=32768, 34 GB / 32 GiB
interface_write()
1 * FAT16 >32M 0 1 1 14 254 63 240912 [DellUtility]
2 P FAT32 LBA 15 0 1 4192 254 63 67119570 [ Unlabeled]
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
Partition table type (auto): Intel
Disk /dev/sdb - 134 GB / 125 GiB - Initio INIC-1610P
Partition table type: Intel
TestDisk exited normally.