2x hdd mediasonic raid1 shows raw data

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Post Reply
Message
Author
throwaway88
Posts: 1
Joined: 22 Nov 2020, 09:17

2x hdd mediasonic raid1 shows raw data

#1 Post by throwaway88 »

I have a mediasonic 2-bay raid enclosure with 2 6TB harddrives inside that are GPT and RAID 1. Windows detects the RAID and individual disks as raw data. I tried running Testdisk and the partition seems fine but shows MS Data. Structure shows Ok and the partition is there.

How do I get Windows to read these harddrives again? I went to T: change type, but then I'm not sure what options to choose as there's about 30 different choices. First option is MS data, after selecting that it shows NTFS. Should I just hit the write button? How do I fix this issue?

screenshots: https://imgur.com/a/9ecdTUd

Sponsored links

recuperation
Posts: 953
Joined: 04 Jan 2019, 09:48
Location: Hannover, Deutschland (Germany, Allemagne)

Re: 2x hdd mediasonic raid1 shows raw data

#2 Post by recuperation »

throwaway88 wrote:
22 Nov 2020, 09:25
I have a mediasonic 2-bay raid enclosure with 2 6TB harddrives inside that are GPT and RAID 1. Windows detects the RAID and individual disks as raw data. I tried running Testdisk and the partition seems fine but shows MS Data.
Why "but MS Data"?
Structure shows Ok and the partition is there.
Use the "p"-key to list files inside the partion. There is a reason your windows is unable to read it. What is the file system used?
How do I get Windows to read these harddrives again? I went to T: change type, but then I'm not sure what options to choose as there's about 30 different choices. First option is MS data, after selecting that it shows NTFS. Should I just hit the write button? How do I fix this issue?
Unreadable drives rarely get readable but changing the partition type. "MS Data" is good. By selecting NTFS you would enforce MBR and therefore change the partition table type. That won't solve your problem and could create new ones.
https://en.wikipedia.org/wiki/GUID_Partition_Table
Please attach your screenshots to your post using the attachment tab below on the page.

Post Reply