This partition ends after the disk limits (1TB)

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
User avatar
filipous
Posts: 3
Joined: 26 Aug 2012, 01:22

This partition ends after the disk limits (1TB)

#1 Post by filipous »

Dear Gurus,

I'm facing very similiar situation to http://forum.cgsecurity.org/phpBB3/post ... imit#p3434 , but with different size of disk and I do not know if I can apply the very same steps like in "try folowwing" from http://forum.cgsecurity.org/phpBB3/post ... icky#p1093

If so, what should be the cylinder value?

My disc:
WESTERN DIGITAL WD My Book Essential 1TB Ext. 3.5" USB2.0, 16MB cache (single drive)

Using TestDisk 6.14WIPwin64 on W7 Home.

Log:
search_part()
Drive H: - 999 GB / 930 GiB - CHS 121515 255 63
BAD_RS LBA=925781040 9747443
check_part_i386 failed for partition type 0B
FAT32 57627 52 10 322344 7 21 4252675782
This partition ends after the disk limits. (start=925781040, size=4252675782, end=883489525, disk end=1952149504)
Drive H: - 999 GB / 930 GiB - CHS 121515 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (999 GB / 930 GiB) seems too small! (< 2651 GB / 2469 GiB)
The following partition can't be recovered:
FAT32 57627 52 10 322344 7 21 4252675782

Thanks a lot for any feedback.
Filip

User avatar
cgrenier
Site Admin
Posts: 5432
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: This partition ends after the disk limits (1TB)

#2 Post by cgrenier »

Don't select H: but the physical drive if possible.

User avatar
filipous
Posts: 3
Joined: 26 Aug 2012, 01:22

Re: This partition ends after the disk limits (1TB)

#3 Post by filipous »

UPDATED
Thanks a lot for help. I tried the physical disk deep analyze, it ends with error:

Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (999 GB / 930 GiB) seems too small! (< 2651 GB / 2469 GiB)
The following partition can't be recovered:
FAT32 57627 84 42 322344 39 53 4252675782

Here is log:

Code: Select all

Sun Sep 23 04:18:43 2012
Command line: TestDisk

TestDisk 6.14-WIP, Data Recovery Utility, July 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7601) SP1
Compiler: GCC 4.7, MinGW 3.11
Compilation date: Aug 14 2012 11:59:38
ext2fs lib: none, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: 20120504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=2000398934016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=999501594624
filewin32_getfilesize(\\.\PhysicalDrive2) GetFileSize err Nesprávná funkce.


filewin32_setfilepointer(\\.\PhysicalDrive2) SetFilePointer err Nesprávná funkce.


Warning: can't get size for \\.\PhysicalDrive2
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=1004795944960
filewin32_getfilesize(\\.\D:) GetFileSize err Nesprávná funkce.


filewin32_setfilepointer(\\.\D:) SetFilePointer err Nesprávná funkce.


Warning: can't get size for \\.\D:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\E:)=0
Warning: can't get size for \\.\E:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=700448768
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=995494985728
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=999500546048
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\J:)=5500665856
Hard disk list
Disk \\.\PhysicalDrive0 - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512
Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63, sector size=512
Drive C: - 1004 GB / 935 GiB - CHS 122159 255 63, sector size=512
Drive F: - 700 MB / 668 MiB - CHS 167 64 32, sector size=2048
Drive G: - 995 GB / 927 GiB - CHS 121028 255 63, sector size=512
Drive H: - 999 GB / 930 GiB - CHS 121515 255 63, sector size=512
Drive J: - 5500 MB / 5245 MiB - CHS 1311 64 32, sector size=2048

Partition table type (auto): Intel
Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB
Partition table type: Intel

Analyse Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63
Geometry from i386 MBR: head=255 sector=63
NTFS at 0/32/33
Current partition structure:
 1 * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
Failed to read index block: Input/output error.

search_part()
Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63
NTFS at 0/32/33
filesystem size           1952149504
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               122009343
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS, blocksize=4096, 999 GB / 930 GiB

Results
   * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS, blocksize=4096, 999 GB / 930 GiB


dir_partition inode=5
   * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS, blocksize=4096, 999 GB / 930 GiB
file_win32_pread(92,16,buffer,3615408(225/12/28)) read err: read after end of file
file_win32_pread(92,1,buffer,3615408(225/12/28)) read err: read after end of file
ntfs_readdir failed
Directory /
       5 dr-xr-xr-x     0      0         0 21-Aug-2012 11:55 .
       5 dr-xr-xr-x     0      0         0 21-Aug-2012 11:55 ..

interface_write()
 1 * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]

search_part()
Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63
NTFS at 0/32/33
filesystem size           1952149504
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               122009343
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS, blocksize=4096, 999 GB / 930 GiB
BAD_RS LBA=925783088 9747443
check_part_i386 failed for partition type 0B
     FAT32                57627  84 42 322344  39 53 4252675782
This partition ends after the disk limits. (start=925783088, size=4252675782, end=883491573, disk end=1952151552)
NTFS at 121515/207/36
filesystem size           1952149504
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               122009343
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS found using backup sector, blocksize=4096, 999 GB / 930 GiB
Disk \\.\PhysicalDrive1 - 999 GB / 930 GiB - CHS 121515 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (999 GB / 930 GiB) seems too small! (< 2651 GB / 2469 GiB)
The following partition can't be recovered:
     FAT32                57627  84 42 322344  39 53 4252675782

Results
   * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
     NTFS, blocksize=4096, 999 GB / 930 GiB

interface_write()
 1 * HPFS - NTFS              0  32 33 121515 207 36 1952149504 [My Book]
simulate write!

write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition

TestDisk exited normally.
All ideas and hints are really apreciated.
Thanks and have a good rest of weekend.

Filip

User avatar
filipous
Posts: 3
Joined: 26 Aug 2012, 01:22

Re: This partition ends after the disk limits (1TB)

#4 Post by filipous »

I really feel that my issue is similiar to
http://forum.cgsecurity.org/phpBB3/post ... imit#p3434
and
http://forum.cgsecurity.org/phpBB3/post ... icky#p1093

but I do not know what should be the number of cylinders for my 1TB WD harddisk.
Can somebody support me?

Cheers, Filip

Locked