Page 1 of 1
read error at cyl/254/63
Posted: 23 Dec 2013, 15:30
by PieterD
On every cylinder i get an read arror for exemple:
read error at 7/254/63.
What could that be/how to repair?
PieterD
Re: read error at cyl/254/63
Posted: 08 Jan 2014, 21:40
by BadHDsMakeMeSad
I'm getting this same problem with a 1TB USB Hard Drive... No partitions show up as well... It's been running about a day and a half now, and I'm only about 33% done with the scan.
Re: read error at cyl/254/63
Posted: 09 Jan 2014, 14:07
by BadHDsMakeMeSad
I am having the same problem... So far I've been doing the analysis scan for two days now and I'm only at 55% with a 1TB USB hard drive.
Re: read error at cyl/254/63
Posted: 13 Jan 2014, 14:23
by BadHDsMakeMeSad
Well after 4 days of scanning TestDisk did not find any partition information... I'm not wasting my time with a Deeper Scan. It seems this consistent read error I receive throughout the whole scanning process does not return any valuable information from the drive. Oh well....