Raid array Non Member Disk

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
lqhnybear
Posts: 2
Joined: 07 Feb 2014, 08:45

Raid array Non Member Disk

#1 Post by lqhnybear »

I updated my motherboard drivers and it messed up my raid 0 array. It told me the first disk was a Non Member Disk.

I have 3 drives in the array. This is only a data drive and not the main drive for the system to boot from. I went into the raid configuration and set the disks to non raid then set all the back to raid as I've seen in several tutorials. I ran testdisk and it found the partition and I was able to see all my files when I pressed P. I wrote the data to disk as it said and when I reboot the raid array still isn't accessible in windows. It shows the drive but says I must format it.

I'm not sure what I'm doing wrong but I need help as I have 6TB of data on the array.

lqhnybear
Posts: 2
Joined: 07 Feb 2014, 08:45

Re: Raid array Non Member Disk

#2 Post by lqhnybear »

I've since found my issue and gotten everything working properly again. Thank you for this data saving program. :)

Locked