NAS Issues
Posted: 19 Apr 2015, 22:15
Good afternoon!
I have a Seagate Freeagent 1.5TB drive that has been connected to my router for NAS. It started to have readability issues - could be seen, but not read or written to. I don't know if the problem pre-dated that, or was caused by the fact that I didn't eject it from the router before pulling the USB out. So, now attached to my PC, it reads as RAW.
I downloaded and ran TestDisk (twice) and it can't find the partition. It is also giving an error about HD sectors being 63 instead of 32. Below is the full log - since I'm not getting the response the instructions say I should, I don't know how to proceed.
Thoughts?
Thank you!
Log (drive in question is F):
Sat Apr 18 10:57:41 2015
Command line: TestDisk
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7601) SP1
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdc)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdd)=3000592977920
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sde)=1500301908992
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive3)=3000592977920
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive4)=1500301908992
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=120031543296
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=500104691712
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=1500301845504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=20123648
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\J:)=2048
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\Z:)=3000579915776
Hard disk list
Disk /dev/sda - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Disk /dev/sdb - 120 GB / 111 GiB - CHS 14593 255 63, sector size=512
Disk /dev/sdc - 1000 GB / 931 GiB - CHS 121601 255 63, sector size=512
Disk /dev/sdd - 3000 GB / 2794 GiB - CHS 45600 255 63, sector size=4096
Disk /dev/sde - 1500 GB / 1397 GiB - CHS 182401 255 63, sector size=512
Disk \\.\PhysicalDrive3 - 3000 GB / 2794 GiB - CHS 45600 255 63, sector size=4096
Drive C: - 120 GB / 111 GiB - CHS 14593 255 63, sector size=512
Drive D: - 500 GB / 465 GiB - CHS 60800 255 63, sector size=512
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63, sector size=512
Drive G: - 20 MB / 19 MiB - CHS 4 64 32, sector size=2048
Drive J: - 2048 B - CHS 1 64 32, sector size=2048
Drive Z: - 3000 GB / 2794 GiB - CHS 45599 255 63, sector size=4096
Partition table type (auto): None
Drive F: - 1500 GB / 1397 GiB
Partition table type: Intel
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,1,buffer,2064(0/32/49)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
FAT32 at 0/0/7
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT1 : 32-357644
FAT2 : 357645-715257
start_rootdir : 715258 root cluster : 2
Data : 715258-2930276985
sectors : 2930277042
cluster_size : 64
no_of_cluster : 45774402 (2 - 45774403)
fat_length 357613 calculated 357613
sect/track 32 (FAT) != 63 (HD)
set_FAT_info: name from BS used
FAT32 at 0/0/7
FAT32 LBA 0 0 1 182401 78 63 2930277042 [CERENMEDIA]
FAT32, blocksize=32768, 1500 GB / 1397 GiB
Partition not added.
file_win32_pread(488,16,buffer,2047(0/32/32)) read err: read after end of file
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,16,buffer,2049(0/32/34)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,1,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,16,buffer,2054(0/32/39)) read err: read after end of file
file_win32_pread(488,1,buffer,2054(0/32/39)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
New options :
Dump : No
Align partition: Yes
Expert mode : No
Interface Advanced
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
FAT32 at 0/0/7
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT1 : 32-357644
FAT2 : 357645-715257
start_rootdir : 715258 root cluster : 2
Data : 715258-2930276985
sectors : 2930277042
cluster_size : 64
no_of_cluster : 45774402 (2 - 45774403)
fat_length 357613 calculated 357613
sect/track 32 (FAT) != 63 (HD)
set_FAT_info: name from BS used
FAT32 at 0/0/7
FAT32 LBA 0 0 1 182401 78 63 2930277042 [CERENMEDIA]
FAT32, blocksize=32768, 1500 GB / 1397 GiB
Partition not added.
file_win32_pread(488,16,buffer,2047(0/32/32)) read err: read after end of file
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,16,buffer,2049(0/32/34)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2054(0/32/39)) read err: read after end of file
file_win32_pread(488,1,buffer,2054(0/32/39)) read err: read after end of file
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
I have a Seagate Freeagent 1.5TB drive that has been connected to my router for NAS. It started to have readability issues - could be seen, but not read or written to. I don't know if the problem pre-dated that, or was caused by the fact that I didn't eject it from the router before pulling the USB out. So, now attached to my PC, it reads as RAW.
I downloaded and ran TestDisk (twice) and it can't find the partition. It is also giving an error about HD sectors being 63 instead of 32. Below is the full log - since I'm not getting the response the instructions say I should, I don't know how to proceed.
Thoughts?
Thank you!
Log (drive in question is F):
Sat Apr 18 10:57:41 2015
Command line: TestDisk
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7601) SP1
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdc)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdd)=3000592977920
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sde)=1500301908992
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=1000204886016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive3)=3000592977920
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive4)=1500301908992
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=120031543296
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=500104691712
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=1500301845504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=20123648
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\J:)=2048
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\Z:)=3000579915776
Hard disk list
Disk /dev/sda - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Disk /dev/sdb - 120 GB / 111 GiB - CHS 14593 255 63, sector size=512
Disk /dev/sdc - 1000 GB / 931 GiB - CHS 121601 255 63, sector size=512
Disk /dev/sdd - 3000 GB / 2794 GiB - CHS 45600 255 63, sector size=4096
Disk /dev/sde - 1500 GB / 1397 GiB - CHS 182401 255 63, sector size=512
Disk \\.\PhysicalDrive3 - 3000 GB / 2794 GiB - CHS 45600 255 63, sector size=4096
Drive C: - 120 GB / 111 GiB - CHS 14593 255 63, sector size=512
Drive D: - 500 GB / 465 GiB - CHS 60800 255 63, sector size=512
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63, sector size=512
Drive G: - 20 MB / 19 MiB - CHS 4 64 32, sector size=2048
Drive J: - 2048 B - CHS 1 64 32, sector size=2048
Drive Z: - 3000 GB / 2794 GiB - CHS 45599 255 63, sector size=4096
Partition table type (auto): None
Drive F: - 1500 GB / 1397 GiB
Partition table type: Intel
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,1,buffer,2064(0/32/49)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
FAT32 at 0/0/7
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT1 : 32-357644
FAT2 : 357645-715257
start_rootdir : 715258 root cluster : 2
Data : 715258-2930276985
sectors : 2930277042
cluster_size : 64
no_of_cluster : 45774402 (2 - 45774403)
fat_length 357613 calculated 357613
sect/track 32 (FAT) != 63 (HD)
set_FAT_info: name from BS used
FAT32 at 0/0/7
FAT32 LBA 0 0 1 182401 78 63 2930277042 [CERENMEDIA]
FAT32, blocksize=32768, 1500 GB / 1397 GiB
Partition not added.
file_win32_pread(488,16,buffer,2047(0/32/32)) read err: read after end of file
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,16,buffer,2049(0/32/34)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,1,buffer,2064(0/32/49)) read err: read after end of file
file_win32_pread(488,16,buffer,2054(0/32/39)) read err: read after end of file
file_win32_pread(488,1,buffer,2054(0/32/39)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
New options :
Dump : No
Align partition: Yes
Expert mode : No
Interface Advanced
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
FAT32 at 0/0/7
check_FAT: Unusual media descriptor (0xf0!=0xf8)
FAT1 : 32-357644
FAT2 : 357645-715257
start_rootdir : 715258 root cluster : 2
Data : 715258-2930276985
sectors : 2930277042
cluster_size : 64
no_of_cluster : 45774402 (2 - 45774403)
fat_length 357613 calculated 357613
sect/track 32 (FAT) != 63 (HD)
set_FAT_info: name from BS used
FAT32 at 0/0/7
FAT32 LBA 0 0 1 182401 78 63 2930277042 [CERENMEDIA]
FAT32, blocksize=32768, 1500 GB / 1397 GiB
Partition not added.
file_win32_pread(488,16,buffer,2047(0/32/32)) read err: read after end of file
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,16,buffer,2049(0/32/34)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
file_win32_pread(488,16,buffer,2054(0/32/39)) read err: read after end of file
file_win32_pread(488,1,buffer,2054(0/32/39)) read err: read after end of file
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
Analyse Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
Current partition structure:
No partition is bootable
search_part()
Drive F: - 1500 GB / 1397 GiB - CHS 182401 255 63
file_win32_pread(488,16,buffer,2048(0/32/33)) read err: read after end of file
file_win32_pread(488,1,buffer,2052(0/32/37)) read err: read after end of file
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery