One partition containing 3 valid partitions
Posted: 09 Mar 2016, 16:04
Hello,
I have WD my passport 1TB drive which has been broken and its content cant be accessed. After runing 'analyze' several issues were found, here is log:
Next step was 'quick search', the result (see attachment) shows 3 partitions which seems to be correct (position 1, 3 and 4). And there is extra partition at position 2 which starts at the start of first partition and ends at the end of last partition.
I have read few tutorials of testdisk but I am not sure what should I do with these results. Any advice is welcome.
I have WD my passport 1TB drive which has been broken and its content cant be accessed. After runing 'analyze' several issues were found, here is log:
Code: Select all
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB
Partition table type: Intel
Analyse Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121597 255 63
Geometry from i386 MBR: head=122 sector=52
BAD_RS LBA=168624249 5967333
check_part_i386 1 type 6F: no test
BAD_RS LBA=1816210284 5822500
check_part_i386 2 type 20: no test
BAD_RS LBA=1953719666 1561108
check_part_i386 3 type 62: no test
BAD_RS LBA=2710306826 8440241
check_part_i386 4 type 0A: no test
Current partition structure:
1 * Sys=6F 10496 95 25 120556 202 37 1768120654
Bad relative sector.
2 * Willowsoft OFS1 113053 219 43 218809 160 7 1698966388
Bad relative sector.
3 * Sys=62 121613 108 18 238009 119 17 1869902433
Bad relative sector.
4 * OS/2 Boot Manager 168708 203 18 168711 253 48 51376
Bad relative sector.
Only one partition must be bootable
Space conflict between the following two partitions
1 * Sys=6F 10496 95 25 120556 202 37 1768120654
2 * Willowsoft OFS1 113053 219 43 218809 160 7 1698966388
Space conflict between the following two partitions
2 * Willowsoft OFS1 113053 219 43 218809 160 7 1698966388
3 * Sys=62 121613 108 18 238009 119 17 1869902433
Space conflict between the following two partitions
3 * Sys=62 121613 108 18 238009 119 17 1869902433
4 * OS/2 Boot Manager 168708 203 18 168711 253 48 51376
I have read few tutorials of testdisk but I am not sure what should I do with these results. Any advice is welcome.