Raid 0 bootable drive now listed as non Raid, help!
Posted: 23 Apr 2016, 17:38
Hi there,
- I have lost my 2 raid 0 drives, which were my booting drive for Windows.
It happened to me while I was plugging into my pc another drive to check his content and by mistake -while shut down, one of my data cable to 1 of my ssd raid 0 got unplugged.
Now after shutting down and replugging it in, they don't show anymore in my raid config, but just as non-raid.
Will I erase them if I create them as raid 0 again through my bios setup? I'm still not willing to do that step as it says it will delete them.
I have now hooked up an extra HD to run Windows and run testdisk but I don't really like that since it changes my boot start, and it runs in IDE...
Here is my config:
Asus P8Z77-I Deluxe /Z77 chipset
2x Intel 520 Series SSD 240 GB
What do you suggest I should do a as my next step?
- I have lost my 2 raid 0 drives, which were my booting drive for Windows.
It happened to me while I was plugging into my pc another drive to check his content and by mistake -while shut down, one of my data cable to 1 of my ssd raid 0 got unplugged.
Now after shutting down and replugging it in, they don't show anymore in my raid config, but just as non-raid.
Will I erase them if I create them as raid 0 again through my bios setup? I'm still not willing to do that step as it says it will delete them.
I have now hooked up an extra HD to run Windows and run testdisk but I don't really like that since it changes my boot start, and it runs in IDE...
Here is my config:
Asus P8Z77-I Deluxe /Z77 chipset
2x Intel 520 Series SSD 240 GB
What do you suggest I should do a as my next step?