Hi there,
- I have lost my 2 raid 0 drives, which were my booting drive for Windows.
It happened to me while I was plugging into my pc another drive to check his content and by mistake -while shut down, one of my data cable to 1 of my ssd raid 0 got unplugged.
Now after shutting down and replugging it in, they don't show anymore in my raid config, but just as non-raid.
Will I erase them if I create them as raid 0 again through my bios setup? I'm still not willing to do that step as it says it will delete them.
I have now hooked up an extra HD to run Windows and run testdisk but I don't really like that since it changes my boot start, and it runs in IDE...
Here is my config:
Asus P8Z77-I Deluxe /Z77 chipset
2x Intel 520 Series SSD 240 GB
What do you suggest I should do a as my next step?
Raid 0 bootable drive now listed as non Raid, help!
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf