RAID 10 Partition Recovery
Posted: 30 Nov 2016, 16:04
I have a RAID 10 setup with 4x2tb drives, a couple days ago two of the disk got set to non-raid members and the raid failed. I have followed the following steps.
The original partition was 3.7gb. Trying to list the files of the MSdata partitions results in the Can't open filesystem. filesystem seems damaged error.
Started testdisk and searched for EFI GPT, after a deep search it returns the following1) Enter the Ctrl-I configuration utility. Write your raid level, array size, stripe size and everything else that can be configured on a piece of paper, you’ll need this info later.
2) Set drives as “non-raid drives”
3) Reboot and create a new array identical with all the specifics you wrote down in step one.
5) Start testdisk.
The original partition was 3.7gb. Trying to list the files of the MSdata partitions results in the Can't open filesystem. filesystem seems damaged error.