I have a ADATA UVI128 USB flas drive that is giving the dreaded "would you like to format message" when inserted into a Windows PC. The drive was encrypted with the ADATA software, it is my understanding that it has some type of 256-bit encryption.
When running testdisk on the drive, no partitions are unfortunately found. Any help would be greatly appreciated.
I have attached a copy of the logfile: https://www.dropbox.com/s/q2gjhex75egoe ... k.zip?dl=0
ADATA UVI128 16 GB Flash Drive Receovery
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: ADATA UVI128 16 GB Flash Drive Receovery
Use your password to unlock the flash drive. Once it's done,
- run TestDisk, select the drive letter, partition type: None, Advanced, Boot, RebuildBS, List. If you can see your files, choose Write, confirm, Quit
- run PhotoRec, select the drive letter, Whole Disk, Search.
- run TestDisk, select the drive letter, partition type: None, Advanced, Boot, RebuildBS, List. If you can see your files, choose Write, confirm, Quit
- run PhotoRec, select the drive letter, Whole Disk, Search.
Re: ADATA UVI128 16 GB Flash Drive Receovery
I apologize for the late reply, the USB stick does not give me the option of entering a password. When inserted into a Windows PC, I consistently receive a "would you like to format message" every few seconds until I have hundreds of dialogs open.
Any thoughts on how I should proceed?
Any thoughts on how I should proceed?