What Should I do , I have Strukture : bad status .. !!
Posted: 05 Jan 2018, 20:54
----------------------------------------------------------------------------------------------------------------------------------------------------
Oke this is my recovery partitions result ---- !!
----------------------------------------------------------------------------------------------------------------------------------------------------
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Partition Start End Size in sectors
D FAT32 0 32 33 127 155 28 2048000 [ACER_LINUX]
D Linux 129 198 6 31427 134 3 502798336
D Linux Swap 31427 134 4 31932 220 32 8118272
D HPFS - NTFS 31932 220 33 31998 2 4 1046528
>D HPFS - NTFS 31998 67 6 76998 173 39 722931712 -----------> I want to recover this
D HPFS - NTFS 76998 173 40 121601 25 24 716537856 ------------> and this one
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 370 GB / 344 GiB
----------------------------------------------------------------------------------------------------------------------------------------------------
so when i set from D to L i got Structure : bad .. so what should i do .. ??
----------------------------------------------------------------------------------------------------------------------------------------------------
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Partition Start End Size in sectors
D FAT32 0 32 33 127 155 28 2048000 [ACER_LINUX]
D Linux 129 198 6 31427 134 3 502798336
D Linux Swap 31427 134 4 31932 220 32 8118272
D HPFS - NTFS 31932 220 33 31998 2 4 1046528
L HPFS - NTFS 31998 67 6 76998 173 39 722931712
>L HPFS - NTFS 76998 173 40 121601 25 24 716537856
Structure: Bad. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 366 GB / 341 GiB
----------------------------------------------------------------------------------------------------------------------------------------------------
I read the instruction like this ..
"Using the left/right arrow keys, change the status of the selected partition from D(eleted) to L(ogical). This way you will be able to recover this partition"
but if i chose P for both ( partitions that i want to recover ) the structure status is : ok
should be i use P .. Please give me solutions i really need my data back !! thanks
----------------------------------------------------------------------------------------------------------------------------------------------------
Oke this is my recovery partitions result ---- !!
----------------------------------------------------------------------------------------------------------------------------------------------------
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Partition Start End Size in sectors
D FAT32 0 32 33 127 155 28 2048000 [ACER_LINUX]
D Linux 129 198 6 31427 134 3 502798336
D Linux Swap 31427 134 4 31932 220 32 8118272
D HPFS - NTFS 31932 220 33 31998 2 4 1046528
>D HPFS - NTFS 31998 67 6 76998 173 39 722931712 -----------> I want to recover this
D HPFS - NTFS 76998 173 40 121601 25 24 716537856 ------------> and this one
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 370 GB / 344 GiB
----------------------------------------------------------------------------------------------------------------------------------------------------
so when i set from D to L i got Structure : bad .. so what should i do .. ??
----------------------------------------------------------------------------------------------------------------------------------------------------
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Partition Start End Size in sectors
D FAT32 0 32 33 127 155 28 2048000 [ACER_LINUX]
D Linux 129 198 6 31427 134 3 502798336
D Linux Swap 31427 134 4 31932 220 32 8118272
D HPFS - NTFS 31932 220 33 31998 2 4 1046528
L HPFS - NTFS 31998 67 6 76998 173 39 722931712
>L HPFS - NTFS 76998 173 40 121601 25 24 716537856
Structure: Bad. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 366 GB / 341 GiB
----------------------------------------------------------------------------------------------------------------------------------------------------
I read the instruction like this ..
"Using the left/right arrow keys, change the status of the selected partition from D(eleted) to L(ogical). This way you will be able to recover this partition"
but if i chose P for both ( partitions that i want to recover ) the structure status is : ok
should be i use P .. Please give me solutions i really need my data back !! thanks
----------------------------------------------------------------------------------------------------------------------------------------------------