EXCUSE ME - MY BAD ENGLISH - I`M AN OLD GERMAN BOY - BUT LUCKY FOR HELP
Seek assistance in solving my problem - Disk Recovery.
Prehistory:
accidentally erased the W 100 MB partition on the disk to free up disk space.
In the process, want to expand the further data partition.
(Capital error)
FIRST STEP:
With test disk the disk can read.
Use PhotoREc to backup the photos and documents.
(But I'm doubting if I have everything)
SECOND STEP:
Now try to restore the partition.
Did because of the message - CHS Mached - the Cylinder tried once to adjust,
then the old settings are made again.
MESSAGES FORWARD GOODS:
CHS 61042/254/63
H224! = 255
S19! = 63
(I have read these messages, should just be left, wg. New higher disk size access,
and just go on in the testdisk menu -)
CONCLUSION:
At the moment I get error message
BATH SECTOR ERROR
HELP:
Am I correct in assuming that I "shot up" the CHC?
ARE THERE DESPITE ALL A SOLUTION ROUTE AND HOW - THANKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-----------------------------------------------------------------------------------------------------------------------------------
suche Unterstützung beim Lösen meines Problems - Disk Wiederherstellung.
Vorgeschichte:
versehentlich auf der Platte die W 100 MB partition gelöscht, um Speicherplatz freizumachen.
Dabei die weitere Datenpartition erweitern wollen.
(Kapitaler Fehler)
ERSTER SCHRITT:
Mit Testdisk die Platte lesen können.
Mit PhotoREc die Fotos und Dokumente sichern können.
(Bin aber am Zweifeln ob ich alles habe)
ZWEITER SCHRITT:
Versuch nun die Partition wiederherzustelln.
Habe aufgrund der Meldung - CHS Mached - die Cylinder versucht einmalig anzupassen,
danach die alten Einstellungen wieder vorgenommen.
MELDUNGEN VORWEG WAREN:
CHS 61042/254/63
H224!=255
S19!=63
(Diese Meldungen hab ich gelesen, sollten einfach belassen werden, wg. neuen höheren Plattengrößezugriff,
und einfach im Testdiskmenü - weitergegangen werden)
FAZIT:
Im Moment bekomme ich Fehlermeldung
BAD SECTOR ERROR
HILFE:
Gehe ich in der Annahme richtig, dass ich die CHC "zerschossen habe?"
GIBT ES TROTZ ALLEM EINEN LÖSUNGSWEG UND WIE - DANKE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
- Attachments
-
- ERROR.jpg (116.48 KiB) Viewed 2500 times
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
Can you try testdisk 7.1-WIP ?
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
Hi,
I tryed now.
(I`m not a Linux expert)
Just now its running testdik.
I think, the error is comming at Analyse Cylinder 50%
am 07:50 / 09%
(the WARNING: mismatches - I ignore)
best regards
steffen
I tryed now.
(I`m not a Linux expert)
Just now its running testdik.
I think, the error is comming at Analyse Cylinder 50%
am 07:50 / 09%
(the WARNING: mismatches - I ignore)
best regards
steffen
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
1 stepp:
TestDisk 7.1-WIP, Data Recovery Utility, April 2018
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
The harddisk (500 GB / 465 GiB) seems too small! (< 500 GB / 465 GiB)
Check the harddisk size: HD jumper settings, BIOS detection...
The following partition can't be recovered:
Partition Start End Size in sectors
> HPFS - NTFS 12 223 20 60813 206 1 976766976
[ Continue ]
NTFS, blocksize=4096, 500 GB / 465 GiB
TestDisk 7.1-WIP, Data Recovery Utility, April 2018
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
The harddisk (500 GB / 465 GiB) seems too small! (< 500 GB / 465 GiB)
Check the harddisk size: HD jumper settings, BIOS detection...
The following partition can't be recovered:
Partition Start End Size in sectors
> HPFS - NTFS 12 223 20 60813 206 1 976766976
[ Continue ]
NTFS, blocksize=4096, 500 GB / 465 GiB
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
>* HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
cture: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 103 MB / 99 MiB
Partition Start End Size in sectors
>* HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
cture: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue
NTFS, blocksize=4096, 103 MB / 99 MiB
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
1 E extended 0 32 32 12 254 63 206798
5 L HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
[ Quit ] >[Deeper Search] [ Write ] [Extd Part]
Try to find more partitions
Partition Start End Size in sectors
1 E extended 0 32 32 12 254 63 206798
5 L HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
[ Quit ] >[Deeper Search] [ Write ] [Extd Part]
Try to find more partitions
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
I think the geometry is not correct -
( I have changed it false - ?!)
steffen
( I have changed it false - ?!)
steffen
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
#### these from the log file #################
Fri Jun 22 07:41:59 2018
Command line: TestDisk
TestDisk 7.1-WIP, Data Recovery Utility, April 2018
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
OS: Linux, kernel 4.15.0-23-generic (#25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018) x86_64
Compiler: GCC 4.4
ext2fs lib: 1.42.8, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.7
/dev/sda: LBA, HPA support
/dev/sda: size 4128768 sectors
/dev/sda: user_max 4128768 sectors
/dev/sda: native_max 4128768 sectors
/dev/sdb: LBA, HPA, LBA48, DCO support
/dev/sdb: size 312581808 sectors
/dev/sdb: user_max 312581808 sectors
/dev/sdb: native_max 312581808 sectors
/dev/sdb: dco 312581808 sectors
/dev/sdc: LBA, HPA, LBA48, DCO support
/dev/sdc: size 156250000 sectors
/dev/sdc: user_max 156250000 sectors
/dev/sdc: native_max 156250000 sectors
/dev/sdc: dco 156250000 sectors
/dev/sdd: LBA, HPA, LBA48, DCO support
/dev/sdd: size 976773168 sectors
/dev/sdd: user_max 976773168 sectors
/dev/sdd: native_max 976773168 sectors
/dev/sdd: dco 976773168 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop12 - 0 B - 0 sectors, sector size=512
Hard disk list
Disk /dev/sda - 2113 MB / 2016 MiB - CHS 257 255 63, sector size=512 - IBM-DJNA-351520, S/N:G80GLW4K352, FW:J56OA30K
Disk /dev/sdb - 160 GB / 149 GiB - CHS 19457 255 63, sector size=512 - ST3160827AS, S/N:5MT0EAKJ, FW:3.42
Disk /dev/sdc - 80 GB / 74 GiB - CHS 9726 255 63, sector size=512 - WDC WD800JD-75MSA3, S/N:WD-WMAM9Z640258, FW:10.01E04
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512 - ST3500320AS, S/N:9QM90HN2, FW:SD1A
Disk /dev/loop0 - 3411 KB / 3332 KiB - 6664 sectors (RO), sector size=512
Disk /dev/loop1 - 146 MB / 140 MiB - 286800 sectors (RO), sector size=512
Disk /dev/loop10 - 90 MB / 86 MiB - 177264 sectors (RO), sector size=512
Disk /dev/loop11 - 13 MB / 12 MiB - 26600 sectors (RO), sector size=512
Disk /dev/loop2 - 22 MB / 20 MiB - 42976 sectors (RO), sector size=512
Disk /dev/loop3 - 12 MB / 12 MiB - 25008 sectors (RO), sector size=512
Disk /dev/loop4 - 1691 KB / 1652 KiB - 3304 sectors (RO), sector size=512
Disk /dev/loop5 - 3813 KB / 3724 KiB - 7448 sectors (RO), sector size=512
Disk /dev/loop6 - 91 MB / 86 MiB - 177960 sectors (RO), sector size=512
Disk /dev/loop7 - 146 MB / 139 MiB - 285696 sectors (RO), sector size=512
Disk /dev/loop8 - 15 MB / 14 MiB - 29680 sectors (RO), sector size=512
Disk /dev/loop9 - 2428 KB / 2372 KiB - 4744 sectors (RO), sector size=512
Partition table type defaults to Intel
Disk /dev/sdd - 500 GB / 465 GiB - ST3500320AS
Partition table type: Intel
Analyse Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
Current partition structure:
No partition is bootable
search_part()
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
NTFS at 0/32/33
heads/cylinder 224 (NTFS) != 255 (HD)
sect/track 19 (NTFS) != 63 (HD)
filesystem size 202752
sectors_per_cluster 8
mft_lcn 8448
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
NTFS, blocksize=4096, 103 MB / 99 MiB
NTFS at 12/223/20
filesystem size 976766976
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 12 223 20 60813 206 1 976766976
NTFS, blocksize=4096, 500 GB / 465 GiB
This partition ends after the disk limits. (start=206848, size=976766976, end=976973823, disk end=976773168)
file_pread(7,16,buffer,6223935(387/107/40)) read err: Input/output error
#### and another errors ####################
Fri Jun 22 07:41:59 2018
Command line: TestDisk
TestDisk 7.1-WIP, Data Recovery Utility, April 2018
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
OS: Linux, kernel 4.15.0-23-generic (#25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018) x86_64
Compiler: GCC 4.4
ext2fs lib: 1.42.8, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.7
/dev/sda: LBA, HPA support
/dev/sda: size 4128768 sectors
/dev/sda: user_max 4128768 sectors
/dev/sda: native_max 4128768 sectors
/dev/sdb: LBA, HPA, LBA48, DCO support
/dev/sdb: size 312581808 sectors
/dev/sdb: user_max 312581808 sectors
/dev/sdb: native_max 312581808 sectors
/dev/sdb: dco 312581808 sectors
/dev/sdc: LBA, HPA, LBA48, DCO support
/dev/sdc: size 156250000 sectors
/dev/sdc: user_max 156250000 sectors
/dev/sdc: native_max 156250000 sectors
/dev/sdc: dco 156250000 sectors
/dev/sdd: LBA, HPA, LBA48, DCO support
/dev/sdd: size 976773168 sectors
/dev/sdd: user_max 976773168 sectors
/dev/sdd: native_max 976773168 sectors
/dev/sdd: dco 976773168 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop12 - 0 B - 0 sectors, sector size=512
Hard disk list
Disk /dev/sda - 2113 MB / 2016 MiB - CHS 257 255 63, sector size=512 - IBM-DJNA-351520, S/N:G80GLW4K352, FW:J56OA30K
Disk /dev/sdb - 160 GB / 149 GiB - CHS 19457 255 63, sector size=512 - ST3160827AS, S/N:5MT0EAKJ, FW:3.42
Disk /dev/sdc - 80 GB / 74 GiB - CHS 9726 255 63, sector size=512 - WDC WD800JD-75MSA3, S/N:WD-WMAM9Z640258, FW:10.01E04
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512 - ST3500320AS, S/N:9QM90HN2, FW:SD1A
Disk /dev/loop0 - 3411 KB / 3332 KiB - 6664 sectors (RO), sector size=512
Disk /dev/loop1 - 146 MB / 140 MiB - 286800 sectors (RO), sector size=512
Disk /dev/loop10 - 90 MB / 86 MiB - 177264 sectors (RO), sector size=512
Disk /dev/loop11 - 13 MB / 12 MiB - 26600 sectors (RO), sector size=512
Disk /dev/loop2 - 22 MB / 20 MiB - 42976 sectors (RO), sector size=512
Disk /dev/loop3 - 12 MB / 12 MiB - 25008 sectors (RO), sector size=512
Disk /dev/loop4 - 1691 KB / 1652 KiB - 3304 sectors (RO), sector size=512
Disk /dev/loop5 - 3813 KB / 3724 KiB - 7448 sectors (RO), sector size=512
Disk /dev/loop6 - 91 MB / 86 MiB - 177960 sectors (RO), sector size=512
Disk /dev/loop7 - 146 MB / 139 MiB - 285696 sectors (RO), sector size=512
Disk /dev/loop8 - 15 MB / 14 MiB - 29680 sectors (RO), sector size=512
Disk /dev/loop9 - 2428 KB / 2372 KiB - 4744 sectors (RO), sector size=512
Partition table type defaults to Intel
Disk /dev/sdd - 500 GB / 465 GiB - ST3500320AS
Partition table type: Intel
Analyse Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
Current partition structure:
No partition is bootable
search_part()
Disk /dev/sdd - 500 GB / 465 GiB - CHS 60801 255 63
NTFS at 0/32/33
heads/cylinder 224 (NTFS) != 255 (HD)
sect/track 19 (NTFS) != 63 (HD)
filesystem size 202752
sectors_per_cluster 8
mft_lcn 8448
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 0 32 33 12 190 50 202752 [Volume]
NTFS, blocksize=4096, 103 MB / 99 MiB
NTFS at 12/223/20
filesystem size 976766976
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
HPFS - NTFS 12 223 20 60813 206 1 976766976
NTFS, blocksize=4096, 500 GB / 465 GiB
This partition ends after the disk limits. (start=206848, size=976766976, end=976973823, disk end=976773168)
file_pread(7,16,buffer,6223935(387/107/40)) read err: Input/output error
#### and another errors ####################
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
####
This partition ends after the disk limits. (start=206848, size=976766976, end=976973823, disk end=976773168)
file_pread(7,16,buffer,6223935(387/107/40)) read err: Input/output error###
Is this the error - ?
How can I changed the geometry with the correct options.
Thank so many for your help.
best regards from old germany
steffen
This partition ends after the disk limits. (start=206848, size=976766976, end=976973823, disk end=976773168)
file_pread(7,16,buffer,6223935(387/107/40)) read err: Input/output error###
Is this the error - ?
How can I changed the geometry with the correct options.
Thank so many for your help.
best regards from old germany
steffen
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: Seek assistance in solving my problem - Disk Recovery- SECTOR ERROR
The CRC / read errors show that there are bad sectors. You should clone your disk to a new empty disk using ddrescue as described in https://www.cgsecurity.org/testdisk.pdf
Once it's done, remove the original disk and try to access your data from the clone. If necessary, try to repair the filesystem from the clone.
Good luck
Once it's done, remove the original disk and try to access your data from the clone. If necessary, try to repair the filesystem from the clone.
Good luck