HDD NTFS file system switched to RAW. Partition is found but can not list files.

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Post Reply
Message
Author
AI2049
Posts: 1
Joined: 23 Jun 2019, 04:50

HDD NTFS file system switched to RAW. Partition is found but can not list files.

#1 Post by AI2049 » 23 Jun 2019, 05:40

My Windows 7 desktop crushed with a BSOD. After I tried to restart it, it failed to boot the OS. I tried several times to run the “Startup Repair” option from the Windows Recovery Environment (WinRE). According to the logs, sometimes all checks were completed successfully, sometimes it found some errors, but it never solved the problem, computer still could not boot the OS.

After that, I have noticed that WinRE has created a new partition on my system disk – “System Reserved” (originally there was only one partition on the disk) and changed the drive letter of the system partition (where the Windows folder resides) from “C:” to “F:”.

I ran Victoria on the HDD, it found one error on the disk (probably, from a long time ago), but overall the disk health was reported as “Good”, the SMART looked Ok. I still could use the disk, could read and write files to it, I saw no corruption of my files on the disk, but I could not boot the OS from it.

I decided to restore the disk manually. I deleted the “System Reserved” partition with diskpart. It turned into “Unallocated”. Then with the program “MiniTool Partition Wizard Home Edition” I extended the system partition so that it would occupy the entire disk. Now the system disk was detected correctly as drive “C:”. I could read all my files from it, could launch programs from it.

Then I deleted the folder “boot” from the root directory, I reset BIOS, and re-seated memory modules and cables inside the computer case. I booted WinRE from a Windows 7 installation disk, and I ran the following commands in the Command prompt:

>bootrec /fixmbr
Success.
>bootrec /fixboot
Element not found.
>bootrec /rebuildBCD
Could not find any Windows installations.
>bcdedit
The boot configuration data store could not be opened.
>sfc /scannow /offbootdir=C:\ /offwindir=C:\windows
Windows Resource Protection found corrupt files but was unable to fix some of them.

After that I checked the contents of the log file "C:\windows\Logs\CBS\CBS.log"
It contained no records of the date when I ran sfc. All the records in the log were of prior dates.

Then I turned the computer off and since that time the file system on my system HDD disk has changed to RAW. I can not see any files on the disk anymore, I can not run chkdsk on the disk, I can not mount the disk under Linux. The disk status is still reported as “Healthy (Active)”.

I tried to restore the disk with the TestDisk program.

“Analyze” right away has found one primary bootable partition with NTFS file system, spanning the entire disk, with an invalid boot sector.
Image

Subsequent “Quick Search” has found no partitions at all.
Image

Then “Deeper Search” again has found the NTFS partition, but the size was smaller, it started not at 0 cylinder, but at #13, and there was a warning: “The current number of heads per cylinder is 240 but the correct value may be 255”. After I tried to “list files”, it gave me an error message: “Can’t open filesystem. Filesystem seems damaged”.
Image
Image
Image

HDD’s SMART status is still “good” as reported by Victoria.
Image

This is the complete TestDisk log:
https://justpaste.it/2khyd

What do I do now? Should I try to change the geometry and try the search again?

Sponsored links

User avatar
cgrenier
Site Admin
Posts: 4847
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: HDD NTFS file system switched to RAW. Partition is found but can not list files.

#2 Post by cgrenier » 26 Jun 2019, 06:29

Can you retry with latest 7.1-WIP ?
The partition table type is PC Intel or EFI GPT.

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests