Drive is failing, can't access through windows or ubuntu
Posted: 30 Jul 2019, 13:55
Hello,
Trying to recover what I can from an old 500GB WD green drive that I've had from college. No mechanical clicks, clunks or other noises coming from the drive, it's recognized as RAW when windows is booted. Ubuntu recognizes the disk as well, but says it's like to fail soon.
Smartmontools was ran and these are the results:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-15-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD5000AAVS-00ZTB0
Serial Number: WD-WCASU1427087
LU WWN Device Id: 5 0014ee 200fefb71
Firmware Version: 01.01B01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Mon Jul 29 21:52:52 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: (13980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 161 135 021 Pre-fail Always - 4916
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3999
5 Reallocated_Sector_Ct 0x0033 041 041 140 Pre-fail Always FAILING_NOW 1265
7 Seek_Error_Rate 0x000e 001 001 051 Old_age Always FAILING_NOW 20532
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 15135
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 147
192 Power-Off_Retract_Count 0x0032 001 001 000 Old_age Always - 2221760
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 2294652
194 Temperature_Celsius 0x0022 110 083 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 1265
197 Current_Pending_Sector 0x0012 200 197 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 197 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 198 051 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 12107 inconsistent with error log pointer 3
ATA Error Count: 12107 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12107 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 21 5d ed e0 Error: UNC 1 sectors at LBA = 0x00ed5d21 = 15555873
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 21 5d ed 1d 00 6d+00:17:20.266 READ DMA EXT
25 00 10 21 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 20 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:14.447 READ DMA EXT
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
Error 12106 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 21 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d21 = 15555873
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 21 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 20 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:14.447 READ DMA EXT
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
ec 00 00 00 00 00 00 00 6d+00:17:07.056 IDENTIFY DEVICE
Error 12105 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 20 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d20 = 15555872
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
ec 00 00 00 00 00 00 00 6d+00:17:07.056 IDENTIFY DEVICE
25 00 01 1f 5d ed 1d 00 6d+00:17:07.056 READ DMA EXT
25 00 04 7f 00 00 00 00 6d+00:17:07.054 READ DMA EXT
25 00 10 1f 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
Error 12104 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1f 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d1f = 15555871
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1f 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:02.924 READ DMA EXT
25 00 01 1e 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:01.336 READ DMA EXT
25 00 10 1e 5d ed 1d 00 6d+00:16:55.749 READ DMA EXT
Error 12103 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1e 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d1e = 15555870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1e 5d ed 1d 00 6d+00:16:55.749 READ DMA EXT
25 00 01 1d 5d ed 1d 00 6d+00:16:55.747 READ DMA EXT
25 00 10 1d 5d ed 1d 00 6d+00:16:49.678 READ DMA EXT
25 00 01 1c 5d ed 1d 00 6d+00:16:49.676 READ DMA EXT
25 00 10 1c 5d ed 1d 00 6d+00:16:43.856 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 15135 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Testdisk was ran in quick search mode and here is the log:
[https://drive.google.com/file/d/1igrj8d ... sp=sharing]
Is there any chance of recovering data from this drive?
Thanks
Trying to recover what I can from an old 500GB WD green drive that I've had from college. No mechanical clicks, clunks or other noises coming from the drive, it's recognized as RAW when windows is booted. Ubuntu recognizes the disk as well, but says it's like to fail soon.
Smartmontools was ran and these are the results:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-15-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD5000AAVS-00ZTB0
Serial Number: WD-WCASU1427087
LU WWN Device Id: 5 0014ee 200fefb71
Firmware Version: 01.01B01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Mon Jul 29 21:52:52 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: (13980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 161 135 021 Pre-fail Always - 4916
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3999
5 Reallocated_Sector_Ct 0x0033 041 041 140 Pre-fail Always FAILING_NOW 1265
7 Seek_Error_Rate 0x000e 001 001 051 Old_age Always FAILING_NOW 20532
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 15135
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 147
192 Power-Off_Retract_Count 0x0032 001 001 000 Old_age Always - 2221760
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 2294652
194 Temperature_Celsius 0x0022 110 083 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 1265
197 Current_Pending_Sector 0x0012 200 197 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 197 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 198 051 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 12107 inconsistent with error log pointer 3
ATA Error Count: 12107 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12107 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 21 5d ed e0 Error: UNC 1 sectors at LBA = 0x00ed5d21 = 15555873
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 21 5d ed 1d 00 6d+00:17:20.266 READ DMA EXT
25 00 10 21 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 20 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:14.447 READ DMA EXT
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
Error 12106 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 21 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d21 = 15555873
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 21 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 20 5d ed 1d 00 6d+00:17:14.449 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:14.447 READ DMA EXT
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
ec 00 00 00 00 00 00 00 6d+00:17:07.056 IDENTIFY DEVICE
Error 12105 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 20 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d20 = 15555872
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 20 5d ed 1d 00 6d+00:17:08.635 READ DMA EXT
ec 00 00 00 00 00 00 00 6d+00:17:07.056 IDENTIFY DEVICE
25 00 01 1f 5d ed 1d 00 6d+00:17:07.056 READ DMA EXT
25 00 04 7f 00 00 00 00 6d+00:17:07.054 READ DMA EXT
25 00 10 1f 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
Error 12104 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1f 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d1f = 15555871
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1f 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:02.924 READ DMA EXT
25 00 01 1e 5d ed 1d 00 6d+00:17:02.924 READ DMA EXT
25 00 01 3f 00 00 00 00 6d+00:17:01.336 READ DMA EXT
25 00 10 1e 5d ed 1d 00 6d+00:16:55.749 READ DMA EXT
Error 12103 occurred at disk power-on lifetime: 15129 hours (630 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1e 5d ed e0 Error: UNC 16 sectors at LBA = 0x00ed5d1e = 15555870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1e 5d ed 1d 00 6d+00:16:55.749 READ DMA EXT
25 00 01 1d 5d ed 1d 00 6d+00:16:55.747 READ DMA EXT
25 00 10 1d 5d ed 1d 00 6d+00:16:49.678 READ DMA EXT
25 00 01 1c 5d ed 1d 00 6d+00:16:49.676 READ DMA EXT
25 00 10 1c 5d ed 1d 00 6d+00:16:43.856 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 15135 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Testdisk was ran in quick search mode and here is the log:
[https://drive.google.com/file/d/1igrj8d ... sp=sharing]
Is there any chance of recovering data from this drive?
Thanks