Partitions recovery RAID5

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
IJKIJK
Posts: 5
Joined: 22 Jul 2012, 22:53

Partitions recovery RAID5

#1 Post by IJKIJK »

Hi,

Here is my misfortune. I mounted volumes in RAID5 on a cluster of three hard drives (3x1.5To, to avoid having problems with partitions larger than 2TB with windows).

I had a too short cable between the hard drive and the motherboard, so I moved it to another port nearest the motherboard. Following that, the PC doesn't boot anymore, I had a blue screen (BSOD).
So I put the default BIOS settings to boot. It worked, next I put back my settings, including the RAID configuration. After that, a volume is passed to rebuild and the other to failed ... Knowing that obviously, important datas are on the failed volume... :(

After searching with google, I found this solution:
http://forums.extremeoverclocking.com/s ... ostcount = 6

This is what I do, I deleted my volumes, I give them back identical settings, I run testdisk, it gives me this:
Image
then
Image

I never can list files, so I have not dared to do a write, what do you think about?

I have also plug back hard drives in the same order as before my change of ports, I launch testdisk, it give me same results as the images already shown.


Could anyone help me? : (

Thank you by advance.

PS: This topic already exist in the French section:
http://forum.cgsecurity.org/phpBB3/recu ... -t904.html

Locked