I have Western Digital 2TB (External HDD without Any OS'es Inside/Just Regular Files), but suddenly RAW (not NTFS anymore )
I can't view any files/structures with TestDisk.
When I choosed Intel (Intel/PC Partition) on the Partition Table list and Start to Analyse, It's shown
Warning: Bad Ending Head (CHS and LBA don't match)
No Partition is Bootable
Try to Locate Partition
But, When I choosed EFI GPT Partition on the Partition Table list and Start to Analyse, It's shown
check_FAT: can't read FAT Boot Sector
No FAT, NTFS, ext2, JFS, Reiser, cramfs, or XFS marker
Try to Locate Partition
Please someone Help Me
[HELP] WD My Passport 2TB suddenly RAW
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: [HELP] WD My Passport 2TB suddenly RAW
Run TestDisk, select /dev/sdb, EFI GPT, Advanced, Boot, RebuildBS, List.
If you can see your files, choose Write, confirm, Quit and restart your computer.
If it doesn't work, try PhotoRec.
Good luck
If you can see your files, choose Write, confirm, Quit and restart your computer.
If it doesn't work, try PhotoRec.
Good luck
Re: [HELP] WD My Passport 2TB suddenly RAW
There's no Boot (RebuildBS) options
I tried PhotoRec_Win.exe and seem like this
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: [HELP] WD My Passport 2TB suddenly RAW
Force the type using the "Type" menu to MS Data and NTFS.
The time displayed by PhotoRec seems too high. Does your disk make some unusual noise ?
The time displayed by PhotoRec seems too high. Does your disk make some unusual noise ?
-
- Posts: 2720
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: [HELP] WD My Passport 2TB suddenly RAW
Slow reading speeds often indicate read errors.
Please check the SMART parameters (health) of your drive with smartmontools or Crystaldiskinfo.
Post your smartmontools logfile here.
Please check the SMART parameters (health) of your drive with smartmontools or Crystaldiskinfo.
Post your smartmontools logfile here.
Re: [HELP] WD My Passport 2TB suddenly RAW
recuperation wrote: ↑20 Aug 2019, 17:19 Slow reading speeds often indicate read errors.
Please check the SMART parameters (health) of your drive with smartmontools or Crystaldiskinfo.
Post your smartmontools logfile here.
Code: Select all
C:\Program Files\smartmontools\bin>smartctl.exe -i /dev/sdc
smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-2008r2-sp1] (sf-7.0-1)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20SDZW-11JJ8S1
Serial Number: WD-WXW1AA8JL5EP
LU WWN Device Id: 5 0014ee 210a568d6
Firmware Version: 01.01A01
User Capacity: 2,000,365,379,584 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 21 09:35:55 2019 SEAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Code: Select all
C:\Program Files\smartmontools\bin>smartctl.exe -H /dev/sdc
smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-2008r2-sp1] (sf-7.0-1)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Failed Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILI
NG_NOW 123464
Code: Select all
C:\Program Files\smartmontools\bin>smartctl.exe -t short /dev/sdc
smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-2008r2-sp1] (sf-7.0-1)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line
mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mod
e" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed Aug 21 09:38:58 2019
Use smartctl -X to abort test.
Code: Select all
C:\Program Files\smartmontools\bin>smartctl.exe -l selftest /dev/sdc
smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-2008r2-sp1] (sf-7.0-1)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA
_of_first_error
# 1 Short offline Completed without error 00% 1822 -
# 2 Short offline Completed: unknown failure 90% 283 -
Code: Select all
C:\Program Files\smartmontools\bin>smartctl.exe -t long /dev/sdc
smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-2008r2-sp1] (sf-7.0-1)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-li
ne mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 266 minutes for test to complete.
Test will complete after Wed Aug 21 14:07:40 2019
Use smartctl -X to abort test.
C:\Program Files\smartmontools\bin>
-
- Posts: 2720
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: [HELP] WD My Passport 2TB suddenly RAW
Please stop running the extended test because the only tolerable activity is to duplicate the drive.
Use the -a parameter to just read the current state of parameters without testing.
Your drive said:
Do not use Testdisk or Photorec on this drive.
You have to decide if you risk further degradation by running ddrescue to create a copy of the readable sectors or if you contact professional companies like Kroll or Attingo for help.
Good luck!
Use the -a parameter to just read the current state of parameters without testing.
Your drive said:
I read this message for the first time.SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Do not use Testdisk or Photorec on this drive.
You have to decide if you risk further degradation by running ddrescue to create a copy of the readable sectors or if you contact professional companies like Kroll or Attingo for help.
Good luck!