Page 1 of 1

test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 07:16
by ankit171032
Hello All,

I am having Seagate 2 TB External HD. Some files were copying from HD to system when my system got hanged somehow (due to seagate drive detector tool which was running in the background at the same time). So I removed it without safely ejecting it and after that when I re plugged the HD it was not detecting in Windows (Local Disk E:/ is showing with no details)

Now I am trying to use Testdisk. Its a very powerful tool. I did some sample recovery from my other devices (pendrive, hard disk) and it is working great. But for my corrupted HD it is not auto detecting correct partition table. Auto detecting is giving Xbox and sometimes None. However, when I am checking partition table for my new seagate HD it is EFI/GPT. When I am manually selecting EFI/GPT (or Intel) for my corrupted HD it is showing "No partition available" on clicking Advanced option.

Please suggest how to choose partition table correctly or if my HD is having problem with partition table how to repair it ?

Thanks

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 07:20
by cgrenier
As no partition is listed in Advanced, using EFI GPT or PC Intel, try Analyse, Quick Search.
If you see your partition, set it as P(rimary). On next screen, choose Write, confirm, Quit

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 12:08
by ankit171032
I tried "Analyse" option using Intel, it is displaying "Partition: Read error" and when I am clicking Quick search then it is not displaying anything and still stuck (or taking time) at same error page. Nothing happened even after 3 hours.

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 14:38
by recuperation
Please duplicate the drive with ddrescue and rerun testdisk on the duplicate.

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 15:07
by ankit171032
Quick search has started. Now it is analyzing cylinder.

In 2.5 hours only 2/1907728 process finished occurring at a very slow speed.

This is also showing "Read error at 1/1/1 (lba=2080)"

Should I duplicate or wait for its finish. With this speed, it will take huge amount of time to finish.

Please suggest

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 18:21
by recuperation

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 18:39
by ankit171032
Sorry the above link is not working

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 20:26
by recuperation
It is working perfectly.

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 20:29
by ankit171032
It is loading on the same page.

Re: test disk unable to detect correct Partition table type

Posted: 05 Nov 2019, 20:33
by recuperation
That's what it's supposed to do.
And it focuses on one posting.

The simple fact is:

If you are asking me for advice, ignoring it, doing something else and asking me again
why should I bother responding?