the rest are of the other system partition which i recover using a windows boot cd..
Please let me know, how did you do that?
Are you sure, that you confirmed with enter at this screen?;
http://www.cgsecurity.org/wiki/File:Search_menu.gif
Because Deeper Search searches additional for partitions using the backup of the boot sector.
So it often finds more, but it takes a little bit longer.
Only using the menu MBR code or Delete wouldn't move any partition including a boot sector somewhere in the middle of nowhere, like your partition is listed on your first screen;
This partition ends 200 GB beyond your disk limit
Normally it changes only the MBR or partition table.
The size of the MBR is only 1sector of 512 Bytes.
That's why it's difficult to judge.
Please, try the following;
Confirm in TestDisk through until you see Analyse.
Don't confirm at Analyse but Geometry.
Please check Cylinder.
Change the value to
105600 .
Leave the menu at OK
Check Analyse and press enter.
Proceed at Quick Search with enter also.
If TestDisk starts a scan, wait until you see that partition GBR_D.
Press enter to stop the scan.
Your partition with label GBR_D should be listed.
Please upload a screen.
Check that partition and press p to list your files.
But it'd only possible as long as a boot sector is recognized
Do you see your files or an error message.
This is only intended for diagnosing purposes.
It doesn't change anything to your HDD.
Don't use write or anything else!
Pleas let me know.
If not, it might be an idea to add a partition on your unallocated space manually to have a boot sector diagnose.
Should be exactly the space of your previous partition.