RAW HDD attempting to repair
Posted: 30 May 2014, 03:30
I have an external Hard drive (Internal converted to external). It has gone RAW and trying to repair. This is as far as I got. Please help as I'm trying to recover my sons 11 years of life in pictures.
I start with
Create log file >
Select a media (use Arrow keys, then press Enter):
Disk \\.\PhysicalDrive0 - 500 GB / 465 GiB
Disk \\.\PhysicalDrive1 - 300 GB / 279 GiB
Drive C: - 489 GB / 455 GiB
Drive D: - 10436 MB / 9953 MiB
>Drive F: - 300 GB / 279 GiB
I then select drive F: the problem Hdd > Then I select partition table type >[Intel ] Intel/PC partition > Then Analyze
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Current partition structure:
Partition Start End Size in sectors
1 * Sys=72 13577 238 11 119521 238 60 1701990410
Bad relative sector.
2 * Sys=74 45381 70 3 79242 34 29 543974724
Bad relative sector.
3 * NetWare 3.11+ 10498 56 41 10498 56 40 0
Bad relative sector.
Only one partition must be bootable
Space conflict between the following two partitions
1 * Sys=72 13577 238 11 119521 238 60 1701990410
2 * Sys=74 45381 70 3 79242 34 29 543974724
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
>[Quick Search] [ Backup ]
Try to locate partition
After that I select [ Backup ] and after a while it crashes and it gives me this.
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Analyse cylinder 2/36481: 00%
Read error at 1/232/40 (lba=30720)
If close progrma and retry to analyze again it gives me this error message
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Current partition structure:
Partition Start End Size in sectors
Partition sector doesn't have the endmark 0xAA55
I start with
Create log file >
Select a media (use Arrow keys, then press Enter):
Disk \\.\PhysicalDrive0 - 500 GB / 465 GiB
Disk \\.\PhysicalDrive1 - 300 GB / 279 GiB
Drive C: - 489 GB / 455 GiB
Drive D: - 10436 MB / 9953 MiB
>Drive F: - 300 GB / 279 GiB
I then select drive F: the problem Hdd > Then I select partition table type >[Intel ] Intel/PC partition > Then Analyze
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Current partition structure:
Partition Start End Size in sectors
1 * Sys=72 13577 238 11 119521 238 60 1701990410
Bad relative sector.
2 * Sys=74 45381 70 3 79242 34 29 543974724
Bad relative sector.
3 * NetWare 3.11+ 10498 56 41 10498 56 40 0
Bad relative sector.
Only one partition must be bootable
Space conflict between the following two partitions
1 * Sys=72 13577 238 11 119521 238 60 1701990410
2 * Sys=74 45381 70 3 79242 34 29 543974724
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
>[Quick Search] [ Backup ]
Try to locate partition
After that I select [ Backup ] and after a while it crashes and it gives me this.
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Analyse cylinder 2/36481: 00%
Read error at 1/232/40 (lba=30720)
If close progrma and retry to analyze again it gives me this error message
Drive F: - 300 GB / 279 GiB - CHS 36482 255 63
Current partition structure:
Partition Start End Size in sectors
Partition sector doesn't have the endmark 0xAA55