Help with restoring USB drive
Posted: 23 Apr 2015, 19:29
Hi forum. Here is the thing. I was installing Lubuntu while fogetting to unplug my USB disk. I didn't perform install on this disk, just lubuntu install program possibly probed all disks I have and hanged probing my USB drive. I then exited. Now my USB disk cannot be mounted. Here is what I got when I try to mount it:
Error mounting /dev/sdc1 at /media/digger/FreeAgent GoFlex Drive: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/digger/FreeAgent GoFlex Drive"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=17625 count=1 br=-1: Input/output error
Inode is corrupt (5): Input/output error
Index root attribute missing in directory inode 5: Input/output error
Failed to mount '/dev/sdc1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
I scanned the disk with TestDisk and it says that structure is ok. Now I am not sure what are my next steps. Please advise. Thank you
Error mounting /dev/sdc1 at /media/digger/FreeAgent GoFlex Drive: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/digger/FreeAgent GoFlex Drive"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=17625 count=1 br=-1: Input/output error
Inode is corrupt (5): Input/output error
Index root attribute missing in directory inode 5: Input/output error
Failed to mount '/dev/sdc1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
I scanned the disk with TestDisk and it says that structure is ok. Now I am not sure what are my next steps. Please advise. Thank you