Hi All
I hope everyone is well!
I was hoping that someone could help me recover some files from a USB. The file system was default (FAT32).
USB Details: Chipsbank CBM 2090
Size: 2GB
I have followed the steps provided in the following previous post (http://forum.cgsecurity.org/phpBB3/usb- ... 62-10.html) however I have reached a road block.
I am being presented with the following information:
Disk /dev/sdb - 8388 KB / 8192 Kib - CHS 1024 1 16
Disk = P, Partition = FAT32, Start = 0 0 1 1023, End = 0 16, Size in Sectors = 16384
No FAT found
Search subdirectory 2048/16384 0
and I am presented with the stop option.
Any help is greatly appreciated. Thanks in advance!
USB Disk Unreadble
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Re: USB Disk Unreadble
Update:
I finished scanning and was presented with what appears to be a primary and secondary boot record both listed as bad. When I selected Rebuild I am presented with "Can't Find Cluster Size" I created a dump file but I accidentally pressed cntrl+c and it exited the terminal lol
I finished scanning and was presented with what appears to be a primary and secondary boot record both listed as bad. When I selected Rebuild I am presented with "Can't Find Cluster Size" I created a dump file but I accidentally pressed cntrl+c and it exited the terminal lol
Re: USB Disk Unreadble
The recognized size of your flash drive is circa 8 MB instead of 2 GB.
Can you check the size of your flash drive in your disk manegement console to compare it?
Fiona
Can you check the size of your flash drive in your disk manegement console to compare it?
Fiona
Re: USB Disk Unreadble
Hi Fiona,
I am using ubuntu. In the "Disks" application it shows the USB as follows:
Model: ChipsBnk Flash Disk (5.00)
Size: 8.4 MB (8,388,608 bytes)
Volumes: 8.4 MB Unknown
I am using ubuntu. In the "Disks" application it shows the USB as follows:
Model: ChipsBnk Flash Disk (5.00)
Size: 8.4 MB (8,388,608 bytes)
Volumes: 8.4 MB Unknown