Hi. Sorry if this is the 50th post about the exact same issue. I just don't understand what I see, and what I am to do with it. Any help appreciated.
This happened: I turned off my pc normally (Windows 10), unplugged one disk and used the cables to plug in another. Booted up, took the files I needed, and switched again in the same way. When I then booted up again my disk was "Not accessible. The file or directory is corrupted and unreadable" I tried chkdsk, but it said that the master "file table is corrupt, chkdsk aborted". Searching the internet led me to Testdisk, and I ran it last night according to the step by step guide. After searching through all the cylinders it just asked me to create a partition (I think). I didn't think to screenshot it (3 am in the morning), and just closed the application.
Today, when trting to access my disk, it says "Not accessible, the parameter is incorrect". Bummer if I've made it worse, but oh well...
I should mention that each time I load Testdisk it suggest that I have an unpartitioned disk. I then chose the Intel alternative.
This is the result from the Testdisk analyse, it is the same as it was last night before searching and exiting: https://drive.google.com/open?id=0B971m ... mJqYWE1b28
I think this is what the log says?: I'm trying to recover E. All my disks are internal.
Wed May 4 06:02:52 2016
Command line: TestDisk
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=64023257088
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=2000398934016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdf)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=64023257088
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=2000398934016
filewin32_getfilesize(\\.\PhysicalDrive2) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\PhysicalDrive2) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\PhysicalDrive2
filewin32_getfilesize(\\.\PhysicalDrive3) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\PhysicalDrive3) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\PhysicalDrive3
filewin32_getfilesize(\\.\PhysicalDrive4) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\PhysicalDrive4) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\PhysicalDrive4
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive5)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=63444090880
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\D:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\E:)=500104691712
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=104857600
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=0
Warning: can't get size for \\.\H:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\I:)=0
Warning: can't get size for \\.\I:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\J:)=0
Warning: can't get size for \\.\J:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\K:)=2000396746752
Hard disk list
Disk /dev/sda - 64 GB / 59 GiB - CHS 29380 224 19, sector size=512
Disk /dev/sdb - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512
Disk /dev/sdf - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512
Drive C: - 63 GB / 59 GiB - CHS 29115 224 19, sector size=512
Drive E: - 500 GB / 465 GiB - CHS 60800 255 63, sector size=512
Drive G: - 104 MB / 100 MiB - CHS 48 224 19, sector size=512
Drive K: - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512
Partition table type (auto): None
Drive E: - 500 GB / 465 GiB
Partition table type: Intel
Analyse Drive E: - 500 GB / 465 GiB - CHS 60800 255 63
Geometry from i386 MBR: head=102 sector=52
BAD_RS LBA=1920221984 1286028
check_part_i386 1 type 72: no test
BAD_RS LBA=1936028192 5737917
check_part_i386 2 type 6C: no test
Current partition structure:
1 P Sys=72 119528 74 3 232582 38 44 1816210284
Bad relative sector.
2 * Sys=6C 120512 46 15 242121 118 1 1953653108
Bad relative sector.
Space conflict between the following two partitions
1 P Sys=72 119528 74 3 232582 38 44 1816210284
2 * Sys=6C 120512 46 15 242121 118 1 1953653108
Space conflict between the following two partitions
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: Space conflict between the following two partitions
You tried to search a partition inside a partition... Not a good idea.
Run TestDisk, select disk /dev/sdf, Advanced, select the partition, Boot, RebuildBS, List. If you see your files, choose Write, confirm, Quit and restart.
If List doesn't work, try RepairMFT.
If RepairMFT failed, run PhotoRec instead. http://www.cgsecurity.org/wiki/PhotoRec_Step_By_Step
Run TestDisk, select disk /dev/sdf, Advanced, select the partition, Boot, RebuildBS, List. If you see your files, choose Write, confirm, Quit and restart.
If List doesn't work, try RepairMFT.
If RepairMFT failed, run PhotoRec instead. http://www.cgsecurity.org/wiki/PhotoRec_Step_By_Step
Re: Space conflict between the following two partitions
Thank you for your advice!
PhotoRec did the trick. Now all that remains is to look through 260000 files to find the ones I actually need. But this only requires time and coffee.
Thank you very much!
PhotoRec did the trick. Now all that remains is to look through 260000 files to find the ones I actually need. But this only requires time and coffee.
Thank you very much!