Scanning 500 gb hard drive using Testdisk

Using TestDisk to repair the filesystem
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Post Reply
Message
Author
mkruzel
Posts: 1
Joined: 04 Apr 2018, 13:49
Contact:

Scanning 500 gb hard drive using Testdisk

#1 Post by mkruzel » 04 Apr 2018, 15:27

I have a 500 gb SATA drive that won't boot up and I have it plugged into a working Dell Optiplex 3020 - Windows 10 Enterprise 64 bit scanning with Testdisk. I started the scan Monday using the Analyze scan and started at about 6,000 cylinders. I didn't check the pc till this morning and I brought the pc out of sleep mode and it still is scanning from about the same 6,000 cylinders. Does the Testdisk software not scan when the pc is in sleep mode? Testdisk does see the partition and the Seagate serial number so it is scanning.

Sponsored links

User avatar
cgrenier
Site Admin
Posts: 4235
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: Scanning 500 gb hard drive using Testdisk

#2 Post by cgrenier » 06 Apr 2018, 06:04

If your computer is in sleep mode, all process including testdisk are freezed. Disable the sleep mode to avoid the problem...

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests