HDD nur eine Partition und als RAW

TestDisk benutzen um verlorene Partitionen wiederherzustellen
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Message
Author
Deleted User 14344

HDD nur eine Partition und als RAW

#1 Post by Deleted User 14344 »

Hallo zusammen!

Traue mich fast nicht hier zu fragen, aber finde einfach keine Lösung. Das Problem mit Partitionen und RAW ist ja definitiv keine Seltenheit - trotz dessen hat noch kein Beitrag zum Erfolg geführt.

Meine Festplatte:
https://www.hdsentinel.com/storageinfo_ ... WD7500AAKS

Win10 zeigt folgendes:
hdd1.png
hdd1.png (13.7 KiB) Viewed 11715 times
Das Spuckt TestDisk aus, falls ich das ganze als Drive gewählt habe:
hdd2.png
hdd2.png (185.47 KiB) Viewed 11715 times
Quick und Deeper Search ergeben folgendes:
hdd3.png
hdd3.png (10.56 KiB) Viewed 11715 times
RebuiltBS hat leider auch keinen Erfolg gebracht.


Habe schon einige Beiträge durchgelesen, auf en und de, aber irgendwie hat nichts funktioniert bis jetzt.
Last edited by Deleted User 14344 on 30 Dec 2020, 17:51, edited 2 times in total.

recuperation
Posts: 2720
Joined: 04 Jan 2019, 09:48
Location: Hannover, Deutschland (Germany, Allemagne)

Re: HDD nur eine Partition und als RAW

#2 Post by recuperation »

Ich sehe keine Bilder.
Diese bitte mit dem Anhang-Tabulator am Seitenboden hochladen.

Deleted User 14344

Re: HDD nur eine Partition und als RAW

#3 Post by Deleted User 14344 »

recuperation wrote: 30 Dec 2020, 17:24 Ich sehe keine Bilder.
Diese bitte mit dem Anhang-Tabulator am Seitenboden hochladen.
Hab ich gemacht danke dir!

recuperation
Posts: 2720
Joined: 04 Jan 2019, 09:48
Location: Hannover, Deutschland (Germany, Allemagne)

Re: HDD nur eine Partition und als RAW

#4 Post by recuperation »

Bitte mal die Logdatei von Testdisk veröffentlichen.
Sinnvollerweise bitte auch die Logdatei der smartmontools veröffentlichen, weil sowohl Bootsektor als auch Backup-Bootsektor nicht lesbar sind.
Hinweise hier:
viewtopic.php?p=32635#p32635

Deleted User 14344

Re: HDD nur eine Partition und als RAW

#5 Post by Deleted User 14344 »

TestDisk: (das File ist über 500'000kb gross...)

Code: Select all

ext2fs lib: 1.45.3, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: 20140608, curses lib: ncurses 6.1
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdf)=750156374016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive5)=750156374016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=750153729024
Hard disk list
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63, sector size=512, S/N:DB987654327E9, FW:0104
Drive H: - 750 GB / 698 GiB - CHS 91200 255 63, sector size=512, S/N:DB987654327E9, FW:0104

Partition table type (auto): Intel
Disk /dev/sdf - 750 GB / 698 GiB
Partition table type: Intel

Analyse Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
Geometry from i386 MBR: head=255 sector=63


test_FAT()
 1 P FAT32 LBA                0   1  1 91200 254 63 1465144002
sector_size  0
cluster_size 0
reserved     0
fats         0
dir_entries  0
sectors      0
media        00
fat_length   0
secs_track   0
heads        0
hidden       0
total_sect   0
check_part_i386 failed for partition type 0C
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Current partition structure:
Invalid FAT boot sector
 1 P FAT32 LBA                0   1  1 91200 254 63 1465144002
 1 P FAT32 LBA                0   1  1 91200 254 63 1465144002
No partition is bootable

search_part()
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
file_pread(9,16,buffer,675919(42/18/56)) ReadFile Die Anforderung konnte wegen eines E/A-Gerätefehlers nicht ausgeführt werden.

search_part()
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
file_pread(9,16,buffer,22528(1/102/38)) ReadFile Die Anforderung konnte wegen eines E/A-Gerätefehlers nicht ausgeführt werden.

file_pread(9,1,buffer,22528(1/102/38)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.

file_pread(9,15,buffer,22529(1/102/39)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.
.
.
.
file_pread(9,1,buffer,1465147528(91201/54/62)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.

file_pread(9,1,buffer,1465149441(91201/85/22)) lseek err Invalid argument
file_pread(9,14,buffer,1465149442(91201/85/23)) lseek err Invalid argument
file_pread(9,3,buffer,1465149456(91201/85/37)) lseek err Invalid argument
file_pread(9,3,buffer,1465149503(91201/86/21)) lseek err Invalid argument
file_pread(9,8,buffer,1465149519(91201/86/37)) lseek err Invalid argument
file_pread(9,11,buffer,1465149566(91201/87/21)) lseek err Invalid argument
file_pread(9,2,buffer,1465151488(91201/117/53)) lseek err Invalid argument

Results

Smartmontools hat folgendes ergeben: smartctl -a /dev/sdf

Code: Select all

C:\Program Files\smartmontools\bin>smartctl -a /dev/sdf
smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-20H2] (sf-7.2-1)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue (SATA)
Device Model:     WDC WD7500AAKS-22RBA0
Serial Number:    WD-WCAPT0516333
LU WWN Device Id: 5 0014ee 200994961
Firmware Version: 30.04G30
User Capacity:    750'156'374'016 bytes [750 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Thu Dec 31 09:14:34 2020 MZ
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (15960) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 198) minutes.
Conveyance self-test routine
recommended polling time:        (   6) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   253   173   021    Pre-fail  Always       -       3716
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1277
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       7384
 10 Spin_Retry_Count        0x0012   100   100   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1179
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age   Always       -       842
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1300
194 Temperature_Celsius     0x0022   112   078   000    Old_age   Always       -       40
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   176   000    Old_age   Always       -       110
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       95
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 4280 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4280 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 dd 88 0b 40  Error: UNC 8 sectors at LBA = 0x000b88dd = 755933

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 dd 88 0b 00 00      00:03:20.179  READ DMA EXT
  ef 03 46 00 00 00 00 00      00:03:19.191  SET FEATURES [Set transfer mode]
  ec 00 01 00 00 00 00 00      00:03:19.190  IDENTIFY DEVICE
  b0 d8 00 00 4f c2 00 00      00:03:19.082  SMART ENABLE OPERATIONS
  ef 02 00 00 00 00 00 00      00:03:19.082  SET FEATURES [Enable write cache]

Error 4279 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 dd 88 0b 40  Error: UNC at LBA = 0x000b88dd = 755933

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 dd 88 0b 00 80      00:03:16.427  READ FPDMA QUEUED
  ef 03 46 00 00 00 00 00      00:03:15.808  SET FEATURES [Set transfer mode]
  ec 00 01 00 00 00 00 00      00:03:15.808  IDENTIFY DEVICE
  b0 d8 00 00 4f c2 00 00      00:03:15.700  SMART ENABLE OPERATIONS
  ef 02 00 00 00 00 00 00      00:03:15.700  SET FEATURES [Enable write cache]

Error 4278 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  01 51 08 dd 88 0b 40  Error: AMNF at LBA = 0x000b88dd = 755933

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 08 dd 88 0b 00 80      00:02:55.926  READ FPDMA QUEUED
  61 01 10 d6 ba 02 00 80      00:02:55.925  WRITE FPDMA QUEUED
  61 01 08 5f 00 00 00 80      00:02:55.925  WRITE FPDMA QUEUED
  61 01 08 3f 00 00 00 80      00:02:55.925  WRITE FPDMA QUEUED
  25 00 08 dd 88 0b 00 00      00:02:53.403  READ DMA EXT

Error 4277 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 dd 88 0b 40  Error: UNC 8 sectors at LBA = 0x000b88dd = 755933

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 dd 88 0b 00 00      00:02:53.403  READ DMA EXT
  ef 03 46 00 00 00 00 00      00:02:52.430  SET FEATURES [Set transfer mode]
  ec 00 01 00 00 00 00 00      00:02:52.429  IDENTIFY DEVICE
  b0 d8 00 00 4f c2 00 00      00:02:52.321  SMART ENABLE OPERATIONS
  ef 02 00 00 00 00 00 00      00:02:52.321  SET FEATURES [Enable write cache]

Error 4276 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 dd 88 0b 40  Error: UNC at LBA = 0x000b88dd = 755933

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 dd 88 0b 00 80      00:02:49.673  READ FPDMA QUEUED
  60 08 00 d5 88 0b 00 80      00:02:49.665  READ FPDMA QUEUED
  60 08 00 cd 88 0b 00 80      00:02:49.649  READ FPDMA QUEUED
  60 01 00 8d 3f c7 27 80      00:02:49.636  READ FPDMA QUEUED
  60 08 00 4d 77 85 3b 80      00:02:49.619  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


recuperation
Posts: 2720
Joined: 04 Jan 2019, 09:48
Location: Hannover, Deutschland (Germany, Allemagne)

Re: HDD nur eine Partition und als RAW

#6 Post by recuperation »

Hallo, die Festplatte hat 110 unlesbare Sektoren, bitte mit ddrescue die Festplatte kopieren, wie auch im Handbuch beschrieben:

197 Current_Pending_Sector 0x0012 200 176 000 Old_age Always - 110

Deleted User 14344

Re: HDD nur eine Partition und als RAW

#7 Post by Deleted User 14344 »

Danke für die Bemühungen aber ich glaube ich breche an dieser Stelle ab. Nach 3h ist stand bei ddrescue (unter Ubuntu) plötzlich, "Can't open input file: No such file or directory" und seit da schmiert Ubuntu immer ab wenn ich es nochmal starten will.
Irgndwie ist auf der "Guten Disk" trotz 23% pct rescued nichts zu finden.

Wünsche euch allen einen Guten Rutsch ins Neue Jahr - lasset 2021 besser werden. (:

recuperation
Posts: 2720
Joined: 04 Jan 2019, 09:48
Location: Hannover, Deutschland (Germany, Allemagne)

Re: HDD nur eine Partition und als RAW

#8 Post by recuperation »

benalze wrote: 31 Dec 2020, 16:19 Danke für die Bemühungen aber ich glaube ich breche an dieser Stelle ab. Nach 3h ist stand bei ddrescue (unter Ubuntu) plötzlich, "Can't open input file: No such file or directory" und seit da schmiert Ubuntu immer ab wenn ich es nochmal starten will.
Irgndwie ist auf der "Guten Disk" trotz 23% pct rescued nichts zu finden.

Wünsche euch allen einen Guten Rutsch ins Neue Jahr - lasset 2021 besser werden. (:
Bitte die defekte Platte vor dem Neustart vom System trennen und erst dann an mit dem Rechner verbinden.
Wenn dann der Rechner abstürzt, kann nur eine Datenrettungsfirma weiterhelfen.

Durch die Nutzung der log-Datei ist ddrescue in der Lage, die Kopieraktion fortzusetzen.
Den Vorgang je nach Geduld mehrfach wiederholen!

Deleted User 14344

Re: HDD nur eine Partition und als RAW

#9 Post by Deleted User 14344 »

Vielen Dank fürs Mut machen - sitze bereits wieder daran.

Das System bleibt zwar stabil, nur tut sich nichts in ddrescue. Zwar blinkt die "schlechte Disk" (die "gute" komischerweise nicht) - aber die Zahlen im Terminal bleiben auch nach längerem Warten (30min) bei 0.

Code: Select all

sudo ddrescue -f -n /dev/sdb /dev/sdc /root/recovery.log
also
/dev/schlechte platte /dev/gute platte
Bildschirmfoto von 2021-01-02 14-18-37.png
Bildschirmfoto von 2021-01-02 14-18-37.png (97.27 KiB) Viewed 11592 times
Ich Gedulde mich jetzt noch ein wenig und lasse es sonst sein.

Deleted User 14344

Re: HDD nur eine Partition und als RAW

#10 Post by Deleted User 14344 »

Jemand inzwischen vielleicht eine Idee wie man das ganze doch noch Retten könnte?

Locked