HDD nur eine Partition und als RAW
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
HDD nur eine Partition und als RAW
Hallo zusammen!
Traue mich fast nicht hier zu fragen, aber finde einfach keine Lösung. Das Problem mit Partitionen und RAW ist ja definitiv keine Seltenheit - trotz dessen hat noch kein Beitrag zum Erfolg geführt.
Meine Festplatte:
https://www.hdsentinel.com/storageinfo_ ... WD7500AAKS
Win10 zeigt folgendes: Das Spuckt TestDisk aus, falls ich das ganze als Drive gewählt habe: Quick und Deeper Search ergeben folgendes: RebuiltBS hat leider auch keinen Erfolg gebracht.
Habe schon einige Beiträge durchgelesen, auf en und de, aber irgendwie hat nichts funktioniert bis jetzt.
Traue mich fast nicht hier zu fragen, aber finde einfach keine Lösung. Das Problem mit Partitionen und RAW ist ja definitiv keine Seltenheit - trotz dessen hat noch kein Beitrag zum Erfolg geführt.
Meine Festplatte:
https://www.hdsentinel.com/storageinfo_ ... WD7500AAKS
Win10 zeigt folgendes: Das Spuckt TestDisk aus, falls ich das ganze als Drive gewählt habe: Quick und Deeper Search ergeben folgendes: RebuiltBS hat leider auch keinen Erfolg gebracht.
Habe schon einige Beiträge durchgelesen, auf en und de, aber irgendwie hat nichts funktioniert bis jetzt.
Last edited by Deleted User 14344 on 30 Dec 2020, 17:51, edited 2 times in total.
-
- Posts: 2729
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: HDD nur eine Partition und als RAW
Ich sehe keine Bilder.
Diese bitte mit dem Anhang-Tabulator am Seitenboden hochladen.
Diese bitte mit dem Anhang-Tabulator am Seitenboden hochladen.
Re: HDD nur eine Partition und als RAW
Hab ich gemacht danke dir!recuperation wrote: ↑30 Dec 2020, 17:24 Ich sehe keine Bilder.
Diese bitte mit dem Anhang-Tabulator am Seitenboden hochladen.
-
- Posts: 2729
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: HDD nur eine Partition und als RAW
Bitte mal die Logdatei von Testdisk veröffentlichen.
Sinnvollerweise bitte auch die Logdatei der smartmontools veröffentlichen, weil sowohl Bootsektor als auch Backup-Bootsektor nicht lesbar sind.
Hinweise hier:
viewtopic.php?p=32635#p32635
Sinnvollerweise bitte auch die Logdatei der smartmontools veröffentlichen, weil sowohl Bootsektor als auch Backup-Bootsektor nicht lesbar sind.
Hinweise hier:
viewtopic.php?p=32635#p32635
Re: HDD nur eine Partition und als RAW
TestDisk: (das File ist über 500'000kb gross...)
Smartmontools hat folgendes ergeben: smartctl -a /dev/sdf
Code: Select all
ext2fs lib: 1.45.3, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: 20140608, curses lib: ncurses 6.1
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdf)=750156374016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive5)=750156374016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=750153729024
Hard disk list
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63, sector size=512, S/N:DB987654327E9, FW:0104
Drive H: - 750 GB / 698 GiB - CHS 91200 255 63, sector size=512, S/N:DB987654327E9, FW:0104
Partition table type (auto): Intel
Disk /dev/sdf - 750 GB / 698 GiB
Partition table type: Intel
Analyse Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
Geometry from i386 MBR: head=255 sector=63
test_FAT()
1 P FAT32 LBA 0 1 1 91200 254 63 1465144002
sector_size 0
cluster_size 0
reserved 0
fats 0
dir_entries 0
sectors 0
media 00
fat_length 0
secs_track 0
heads 0
hidden 0
total_sect 0
check_part_i386 failed for partition type 0C
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2
Current partition structure:
Invalid FAT boot sector
1 P FAT32 LBA 0 1 1 91200 254 63 1465144002
1 P FAT32 LBA 0 1 1 91200 254 63 1465144002
No partition is bootable
search_part()
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
file_pread(9,16,buffer,675919(42/18/56)) ReadFile Die Anforderung konnte wegen eines E/A-Gerätefehlers nicht ausgeführt werden.
search_part()
Disk /dev/sdf - 750 GB / 698 GiB - CHS 91201 255 63
file_pread(9,16,buffer,22528(1/102/38)) ReadFile Die Anforderung konnte wegen eines E/A-Gerätefehlers nicht ausgeführt werden.
file_pread(9,1,buffer,22528(1/102/38)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.
file_pread(9,15,buffer,22529(1/102/39)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.
.
.
.
file_pread(9,1,buffer,1465147528(91201/54/62)) ReadFile Die angegebene Netzwerkressource bzw. das angegebene Gerät ist nicht mehr verfügbar.
file_pread(9,1,buffer,1465149441(91201/85/22)) lseek err Invalid argument
file_pread(9,14,buffer,1465149442(91201/85/23)) lseek err Invalid argument
file_pread(9,3,buffer,1465149456(91201/85/37)) lseek err Invalid argument
file_pread(9,3,buffer,1465149503(91201/86/21)) lseek err Invalid argument
file_pread(9,8,buffer,1465149519(91201/86/37)) lseek err Invalid argument
file_pread(9,11,buffer,1465149566(91201/87/21)) lseek err Invalid argument
file_pread(9,2,buffer,1465151488(91201/117/53)) lseek err Invalid argument
Results
Smartmontools hat folgendes ergeben: smartctl -a /dev/sdf
Code: Select all
C:\Program Files\smartmontools\bin>smartctl -a /dev/sdf
smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-20H2] (sf-7.2-1)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD7500AAKS-22RBA0
Serial Number: WD-WCAPT0516333
LU WWN Device Id: 5 0014ee 200994961
Firmware Version: 30.04G30
User Capacity: 750'156'374'016 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Dec 31 09:14:34 2020 MZ
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 253 173 021 Pre-fail Always - 3716
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1277
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7384
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1179
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 842
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1300
194 Temperature_Celsius 0x0022 112 078 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 176 000 Old_age Always - 110
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 95
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4280 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4280 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 dd 88 0b 40 Error: UNC 8 sectors at LBA = 0x000b88dd = 755933
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 dd 88 0b 00 00 00:03:20.179 READ DMA EXT
ef 03 46 00 00 00 00 00 00:03:19.191 SET FEATURES [Set transfer mode]
ec 00 01 00 00 00 00 00 00:03:19.190 IDENTIFY DEVICE
b0 d8 00 00 4f c2 00 00 00:03:19.082 SMART ENABLE OPERATIONS
ef 02 00 00 00 00 00 00 00:03:19.082 SET FEATURES [Enable write cache]
Error 4279 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 dd 88 0b 40 Error: UNC at LBA = 0x000b88dd = 755933
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 dd 88 0b 00 80 00:03:16.427 READ FPDMA QUEUED
ef 03 46 00 00 00 00 00 00:03:15.808 SET FEATURES [Set transfer mode]
ec 00 01 00 00 00 00 00 00:03:15.808 IDENTIFY DEVICE
b0 d8 00 00 4f c2 00 00 00:03:15.700 SMART ENABLE OPERATIONS
ef 02 00 00 00 00 00 00 00:03:15.700 SET FEATURES [Enable write cache]
Error 4278 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 dd 88 0b 40 Error: AMNF at LBA = 0x000b88dd = 755933
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 dd 88 0b 00 80 00:02:55.926 READ FPDMA QUEUED
61 01 10 d6 ba 02 00 80 00:02:55.925 WRITE FPDMA QUEUED
61 01 08 5f 00 00 00 80 00:02:55.925 WRITE FPDMA QUEUED
61 01 08 3f 00 00 00 80 00:02:55.925 WRITE FPDMA QUEUED
25 00 08 dd 88 0b 00 00 00:02:53.403 READ DMA EXT
Error 4277 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 dd 88 0b 40 Error: UNC 8 sectors at LBA = 0x000b88dd = 755933
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 dd 88 0b 00 00 00:02:53.403 READ DMA EXT
ef 03 46 00 00 00 00 00 00:02:52.430 SET FEATURES [Set transfer mode]
ec 00 01 00 00 00 00 00 00:02:52.429 IDENTIFY DEVICE
b0 d8 00 00 4f c2 00 00 00:02:52.321 SMART ENABLE OPERATIONS
ef 02 00 00 00 00 00 00 00:02:52.321 SET FEATURES [Enable write cache]
Error 4276 occurred at disk power-on lifetime: 7382 hours (307 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 dd 88 0b 40 Error: UNC at LBA = 0x000b88dd = 755933
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 dd 88 0b 00 80 00:02:49.673 READ FPDMA QUEUED
60 08 00 d5 88 0b 00 80 00:02:49.665 READ FPDMA QUEUED
60 08 00 cd 88 0b 00 80 00:02:49.649 READ FPDMA QUEUED
60 01 00 8d 3f c7 27 80 00:02:49.636 READ FPDMA QUEUED
60 08 00 4d 77 85 3b 80 00:02:49.619 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
- Posts: 2729
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: HDD nur eine Partition und als RAW
Hallo, die Festplatte hat 110 unlesbare Sektoren, bitte mit ddrescue die Festplatte kopieren, wie auch im Handbuch beschrieben:
197 Current_Pending_Sector 0x0012 200 176 000 Old_age Always - 110
197 Current_Pending_Sector 0x0012 200 176 000 Old_age Always - 110
Re: HDD nur eine Partition und als RAW
Danke für die Bemühungen aber ich glaube ich breche an dieser Stelle ab. Nach 3h ist stand bei ddrescue (unter Ubuntu) plötzlich, "Can't open input file: No such file or directory" und seit da schmiert Ubuntu immer ab wenn ich es nochmal starten will.
Irgndwie ist auf der "Guten Disk" trotz 23% pct rescued nichts zu finden.
Wünsche euch allen einen Guten Rutsch ins Neue Jahr - lasset 2021 besser werden. (:
Irgndwie ist auf der "Guten Disk" trotz 23% pct rescued nichts zu finden.
Wünsche euch allen einen Guten Rutsch ins Neue Jahr - lasset 2021 besser werden. (:
-
- Posts: 2729
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: HDD nur eine Partition und als RAW
Bitte die defekte Platte vor dem Neustart vom System trennen und erst dann an mit dem Rechner verbinden.benalze wrote: ↑31 Dec 2020, 16:19 Danke für die Bemühungen aber ich glaube ich breche an dieser Stelle ab. Nach 3h ist stand bei ddrescue (unter Ubuntu) plötzlich, "Can't open input file: No such file or directory" und seit da schmiert Ubuntu immer ab wenn ich es nochmal starten will.
Irgndwie ist auf der "Guten Disk" trotz 23% pct rescued nichts zu finden.
Wünsche euch allen einen Guten Rutsch ins Neue Jahr - lasset 2021 besser werden. (:
Wenn dann der Rechner abstürzt, kann nur eine Datenrettungsfirma weiterhelfen.
Durch die Nutzung der log-Datei ist ddrescue in der Lage, die Kopieraktion fortzusetzen.
Den Vorgang je nach Geduld mehrfach wiederholen!
Re: HDD nur eine Partition und als RAW
Vielen Dank fürs Mut machen - sitze bereits wieder daran.
Das System bleibt zwar stabil, nur tut sich nichts in ddrescue. Zwar blinkt die "schlechte Disk" (die "gute" komischerweise nicht) - aber die Zahlen im Terminal bleiben auch nach längerem Warten (30min) bei 0.
also
/dev/schlechte platte /dev/gute platte
Ich Gedulde mich jetzt noch ein wenig und lasse es sonst sein.
Das System bleibt zwar stabil, nur tut sich nichts in ddrescue. Zwar blinkt die "schlechte Disk" (die "gute" komischerweise nicht) - aber die Zahlen im Terminal bleiben auch nach längerem Warten (30min) bei 0.
Code: Select all
sudo ddrescue -f -n /dev/sdb /dev/sdc /root/recovery.log
/dev/schlechte platte /dev/gute platte
Ich Gedulde mich jetzt noch ein wenig und lasse es sonst sein.
Re: HDD nur eine Partition und als RAW
Jemand inzwischen vielleicht eine Idee wie man das ganze doch noch Retten könnte?