Win8.1x64, Seagate Backup Plus shows raw file system

Using TestDisk to repair the filesystem
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Message
Author
speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Win8.1x64, Seagate Backup Plus shows raw file system

#1 Post by speedlever »

My daughter's laptop running Win8.1x64 connects to a 3TB Seagate Backup Plus external USB drive where she likes to keep her photos. Recently, she told me the drive wasn't working. So last night I took a look, and it didn't seem to power up. I took it apart, took the 3TB HD out and put it in an external enclosure (USB2/e-sata) I have and powered it up on my Win 8.1x64 PC. Windows sees the drive but wants to format it. The file system shows as RAW.

So I Googled that issue and found a possible solution here:
http://html5.litten.com/updated-how-to- ... ent-300346

Early on, I get conflicting info.

The SMART tool shows the drive's capacity and it tests good:
Image

However, running Testdisk 7, it only seems to show as 375GB/349GB and the note at the bottom seems to indicate recovery will be unsuccessful unless the capacity is correctly detected.
Image

What options do I have at this point?
Last edited by speedlever on 28 Aug 2015, 15:05, edited 1 time in total.

User avatar
Fiona
Posts: 2835
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#2 Post by Fiona »

On your display above, you should select Disk / dev/sdd.
It's your 3 TB-disk.
Confirm through until you see Analyse, press enter and upload another snapshot, so that I'd be able to check your current partition structure (partition table).
If it seems ok, you can run a boot sector diagnose.
Info and steps will follow.
In some cases, especially WD-disks caused some trouble to recover data after removing a disk out of its enclosure.
With Seagate, until yet, I've not seen such problems.

Fiona

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#3 Post by speedlever »

Thanks for the reply Fiona.

I think the 3TB drive you refer to is the wrong one. I have 2 of them connected. One is the Z:\ drive which shows. The f:\ drive is the one in question. Note above how it only shows 375GB below, but no corresponding entry above. I have no idea what the 801GB/746GB drive is referring to. My 3TB Z:\ drive is currently using 508GB of space.

I've tried Recuva (with no success). Same with Asoftech data recovery. Neither of them see the F:\ drive. Windows sees it fine, but can't read the RAW file system.

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#4 Post by speedlever »

Let me try this first: I'll disconnect my good 3TB drive and see what Testdisk sees then. I'll report back when I have a chance to check that.

User avatar
Fiona
Posts: 2835
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#5 Post by Fiona »

Would it be possible that your disk capacity is not recognized correctly?
Most important would be your disk capacity and not Drive!
Drive might be a partition only?
In case you should check cable and how is your disk listed in your BIOS/UEFI too.
In some cases, hdat2 could probably help?
Some info:
http://forum.cgsecurity.org/phpBB3/post ... at2#p16025
But before you use such utilities, you should exclude any other reason.
After getting disk capacity back and you still experience some problems, you can use TestDisk.

Fiona

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#6 Post by speedlever »

Here's a screen shot after disconnecting my Z:\ drive (my own 3TB Seagate Backup drive).

Image

Looks to me like Testdiskv7 is not seeing the problematic F:\ drive except in the bottom part of the display. Not in the Disk /dev/sbx list.

I don't see how drive f:\ relates to anything in the Disk /dev list, unless it's the 801 GB/746 GiB item.. which is the wrong capacity. What am I missing?

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#7 Post by speedlever »

Ok, let me reboot and check my BIOS and see what it's showing.

I'll be back shortly.

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#8 Post by speedlever »

Here's a shot from my UEFI screen. It only shows the defective F:\ drive, instead of both my good Z:\ drive and the faulty F:\ drive (based on the name of the drive).

Backup + Desk is my Z:\ drive (USB 3.0 connected Backup Plus). The problematic F:\ drive is connected via USB 2.0 (I have e-sata available, if that might make a difference, but otherwise, my enclosure is either USB 2.0 or e-sata).

I suspect the USB 3 drivers aren't loaded yet preventing my Z:\ drive from showing in UEFI.
Image

And the latest shot from GSMartControl (shot taken before I removed the Cruzer USB stick drive):
Image

The latest TestDisk shot (taken after I removed the Cruzer USB stick drive):
Image

User avatar
Fiona
Posts: 2835
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#9 Post by Fiona »

UEFI doesn't provide any info about the disk capacity.
Would it be possible that your disk is recognized with 801 GB only?
Before you run any utilities like hdat2, you should run the diagnostic utility from the manufacturer.
Check for firmware update?
Also check Intel Rapid Storage Utility.
http://www.seagate.com/gb/en/support/do ... iscwizard/
Please check the disk capacity in your disk mamagement console too.

Fiona

speedlever
Posts: 10
Joined: 26 Aug 2015, 15:29

Re: Win8.1x64, Seagate Backup Plus shows raw file system

#10 Post by speedlever »

Fiona wrote:UEFI doesn't provide any info about the disk capacity.
Would it be possible that your disk is recognized with 801 GB only?
Before you run any utilities like hdat2, you should run the diagnostic utility from the manufacturer.
Check for firmware update?
Also check Intel Rapid Storage Utility.
http://www.seagate.com/gb/en/support/do ... iscwizard/
Please check the disk capacity in your disk mamagement console too.

Fiona
Hi Fiona,

As you can see from the image below, Disk Mgmt shows the problem F:\ drive (Disk 4) with the incorrect capacity. It was (is?) a 3TB drive before it became RAW.

My own Z:\ drive (Disk 5) is also a 3TB Seagate Backup Plus drive and shows appropriately.

Ergo, I don't believe it is a driver issue, unless I misunderstand what you are saying.

Image

The problem drive is the one at the top of the list. But they both pass the short DST test and both have the same firmware revision. The drive passes the SeaTools SMART check too.
Image

Locked