Hi,
I have problem with my HDD, because I couldn't find my partition to recovery, in testDisk I see
, but in disk menager this:
There is any way to fix my disk without deleting files?
Lost partition couldn't find after analyse
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: Lost partition couldn't find after analyse
If your disk does some unusual noises, a disk head is probably damaged, you should in this case contact a data recovery company.
Otherwise if the problem is due to bad sectors, you should clone the disk to a new empty one using ddrescue from a Linux LiveUSB/LiveDVD as described in https://www.cgsecurity.org/testdisk.pdf
Good luck
Otherwise if the problem is due to bad sectors, you should clone the disk to a new empty one using ddrescue from a Linux LiveUSB/LiveDVD as described in https://www.cgsecurity.org/testdisk.pdf
Good luck
Re: Lost partition couldn't find after analyse
It's external HDD, but I don't hear any strange noisy, but normally, so in Windows testTidsk I can't do anything else?
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: Lost partition couldn't find after analyse
ddrescue under Linux is far better than dd for windows to clone damaged disk, so you really should boot from a Linux LiveUSB.
It's not so difficult.
It's not so difficult.
Re: Lost partition couldn't find after analyse
I see, I will try this way, but for sure I need 2nd HDD with space of broken drive to clone it?
Re: Lost partition couldn't find after analyse
Hi again,
Finally I bought second HDD on which I want to clone my broken HDD. I opened Ubuntu live and started this commend I had to use FORCE, because without it I cannot start cloning process.
Now it's coping very slow and shows me errors in window of DDRESCUE:
https://www.dropbox.com/sh/0y5u9po7ojd1 ... qYyFa?dl=0
Here you can see short movie which shows that black hard drive (that's broken) all time LED is enabled, but on the new one (white) is blinking (just like in coping process), so why black one isn't blinking?
I don't know if it's sense wait for cloning with error rate, what is it mean?
Regards,
Tomek
Finally I bought second HDD on which I want to clone my broken HDD. I opened Ubuntu live and started this commend
Code: Select all
ddrescue --force /dev/sdb /dev/sdc sdb.log
Now it's coping very slow and shows me errors in window of DDRESCUE:
https://www.dropbox.com/sh/0y5u9po7ojd1 ... qYyFa?dl=0
Here you can see short movie which shows that black hard drive (that's broken) all time LED is enabled, but on the new one (white) is blinking (just like in coping process), so why black one isn't blinking?
I don't know if it's sense wait for cloning with error rate, what is it mean?
Regards,
Tomek