ran diskpart on a 4TB drive....
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
ran diskpart on a 4TB drive....
so i ran the following on the wrong disk.
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
i am currently using v7.0 (should i use 7.1?) and with Photorec i was able to pull data off it. the problem is that is so much data and will take me a life time to sort through it (if i have to do it i will. lol)
right now i am running testdisk deep search and it still has a while to finish (at 3% now).
my question is, am i on the right path?
so far this is where it is at.
Thanks!
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sdb - 4000 GB / 3726 GiB - CHS 486401 255 63
Analyse cylinder 15005/486400: 03%
MS Data 5 2048 7814035455 7814033408
MS Data 264192 7814035455 7813771264
Warning: number of heads/cylinder mismatches 64 (FAT) != 255 (HD)
Warning: number of se1tors per track mismatches 32 (FAT) != 63 (HD)
MS Data 171049488 171573775 524288 [NO NAME]
MS Data 171575824 171641359 65536
MS Data 8 171575822 171641357 65536
MS Data 171575824 171641359 65536
MS Data 171608610 171674145 65536
MS Data 2 171575822 171641357 65536
MS Data 171575824 171641359 65536
Warning: number of heads/cylinder mismatches 64 (FAT) != 255 (HD)
Warning: number of sectors per track mismatches 32 (FAT) != 63 (HD)
MS Data 201479160 202003447 524288 [NO NAME]
MS Data 202005496 202071031 65536
MS Data 3 202005494 202071029 65536
MS Data 202005496 202071031 65536
MS Data 202038282 202103817 65536
MS Data 2 202005494 202071029 65536
MS Data 202005496 202071031 65536
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
i am currently using v7.0 (should i use 7.1?) and with Photorec i was able to pull data off it. the problem is that is so much data and will take me a life time to sort through it (if i have to do it i will. lol)
right now i am running testdisk deep search and it still has a while to finish (at 3% now).
my question is, am i on the right path?
so far this is where it is at.
Thanks!
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sdb - 4000 GB / 3726 GiB - CHS 486401 255 63
Analyse cylinder 15005/486400: 03%
MS Data 5 2048 7814035455 7814033408
MS Data 264192 7814035455 7813771264
Warning: number of heads/cylinder mismatches 64 (FAT) != 255 (HD)
Warning: number of se1tors per track mismatches 32 (FAT) != 63 (HD)
MS Data 171049488 171573775 524288 [NO NAME]
MS Data 171575824 171641359 65536
MS Data 8 171575822 171641357 65536
MS Data 171575824 171641359 65536
MS Data 171608610 171674145 65536
MS Data 2 171575822 171641357 65536
MS Data 171575824 171641359 65536
Warning: number of heads/cylinder mismatches 64 (FAT) != 255 (HD)
Warning: number of sectors per track mismatches 32 (FAT) != 63 (HD)
MS Data 201479160 202003447 524288 [NO NAME]
MS Data 202005496 202071031 65536
MS Data 3 202005494 202071029 65536
MS Data 202005496 202071031 65536
MS Data 202038282 202103817 65536
MS Data 2 202005494 202071029 65536
MS Data 202005496 202071031 65536
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: ran diskpart on a 4TB drive....
Try testdisk, Advanced, undelete.
If you had a single NTFS partition, as a single NTFS partition has been recreated, the same location have been used to store the NTFS boot partition, its backup, NTFS MFT records and so on.
In this case, you should sort the files recovered by PhotoRec. Some tips are listed in https://www.cgsecurity.org/testdisk.pdf
If you had a single NTFS partition, as a single NTFS partition has been recreated, the same location have been used to store the NTFS boot partition, its backup, NTFS MFT records and so on.
In this case, you should sort the files recovered by PhotoRec. Some tips are listed in https://www.cgsecurity.org/testdisk.pdf
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
Disk /dev/sdb - 4000 GB / 3726 GiB - CHS 486401 255 63cgrenier wrote: ↑01 Nov 2017, 08:15 Try testdisk, Advanced, undelete.
If you had a single NTFS partition, as a single NTFS partition has been recreated, the same location have been used to store the NTFS boot partition, its backup, NTFS MFT records and so on.
In this case, you should sort the files recovered by PhotoRec. Some tips are listed in https://www.cgsecurity.org/testdisk.pdf
Partition Start End Size in sectors
1 P MS Data 2048 7814035455 7814033408 [Big Bubba]
[ Quit ] >[Deeper Search] [ Write ]
Try to find more partitions
Does this mean that it found my partition? should i select deeper search or write? will write bring back all my old data or overwrite everything where i cannot recover it?
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
so if i select the drive and click write, I should get all my data back??
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
any ideas?
if i select the drive and click write, I should get all my data back
if i select the drive and click write, I should get all my data back
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
Does this mean my data is still there and i should select write?
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
when i use "p" to view files, this is all i see.
Should i select write?
- Attachments
-
- d.png (12.43 KiB) Viewed 3313 times
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51
Re: ran diskpart on a 4TB drive....
Anyone? Please help
- cgrenier
- Site Admin
- Posts: 5432
- Joined: 18 Feb 2012, 15:08
- Location: Le Perreux Sur Marne, France
- Contact:
Re: ran diskpart on a 4TB drive....
As "Big Bubba" is an empty partition, you should try Undelete and if it doesn't work, PhotoRec.
-
- Posts: 11
- Joined: 01 Nov 2017, 01:51