hi ,
i have a hitachi 500 gd external drive which is inaccessible after i accidentally dban it . however the dban program only ran for 2 percent i have quickly unplugged the usd hdd.
now wheni plug it back to computer i am not able to see it under my computer however can be seen under disk management with unallocated message.
i am able to see the files on the hdd using other programs , but unable to recover .
when i run the testdisk it completes the quick search however am i stuck in window where it say the the hdd is too small and gives no further options to move forward.
i will upload the screenshort . please advise
many thanks
jay
hitachi 500gb is no longer accesible
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Re: hitachi 500gb is no longer accesible
Did you use TestDisk 6.14-32bit?
Can you repeat your diagnose as far as possible?
So at least, I'll get infos about your current situation.
I would need infos form Analyse and Quick Search first.
But I assume if you wrote 2 percent into your file system, then it might be damaged.
But to judge your situation I'd need more infos.
Fiona
Normally there should be continue displayed to move forward if you press enter?when i run the testdisk it completes the quick search however am i stuck in window where it say the the hdd is too small and gives no further options to move forward.
Can you repeat your diagnose as far as possible?
So at least, I'll get infos about your current situation.
I would need infos form Analyse and Quick Search first.
But I assume if you wrote 2 percent into your file system, then it might be damaged.
But to judge your situation I'd need more infos.
Fiona
-
- Posts: 8
- Joined: 06 May 2012, 10:21
Re: hitachi 500gb is no longer accesible
thanks fiona , i will get the infos as soon as i have done the dignosing ,
besides i could actually see all the files and folders when icare data receovery areused . thanks for your response , iwill provide snapshots and testdisk.log
besides i could actually see all the files and folders when icare data receovery areused . thanks for your response , iwill provide snapshots and testdisk.log
-
- Posts: 8
- Joined: 06 May 2012, 10:21
Re: hitachi 500gb is no longer accesible
please find attched the result from diagnosis
thanks.
jay
thanks.
jay
- Attachments
-
- result from diag
- testdisksnapshot.jpg (113.42 KiB) Viewed 7004 times
-
- Posts: 8
- Joined: 06 May 2012, 10:21
Re: hitachi 500gb is no longer accesible
Sun May 6 17:29:08 2012
Command line: TestDisk
TestDisk 6.14-WIP, Data Recovery Utility, April 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7600)
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-04-21T15:07:46
ext2fs lib: 1.41.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20100226
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=119926685696
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\D:
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
filewin32_getfilesize(\\.\F:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\F:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\F:
Hard disk list
Disk /dev/sda - 120 GB / 111 GiB - CHS 15505 240 63, sector size=512 - HITACHI HTS541612J9SA00, S/N:2020202020204253443331343545344447414535, FW:SBDIC7UP
Partition table type (auto): Intel
TestDisk exited normally.
Sun May 6 17:29:53 2012
Command line: TestDisk
TestDisk 6.14-WIP, Data Recovery Utility, April 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7600)
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-04-21T15:07:46
ext2fs lib: 1.41.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20100226
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=119926685696
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\D:
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
filewin32_getfilesize(\\.\F:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\F:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\F:
Hard disk list
Disk /dev/sda - 120 GB / 111 GiB - CHS 15505 240 63, sector size=512 - HITACHI HTS541612J9SA00, S/N:2020202020204253443331343545344447414535, FW:SBDIC7UP
Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512 - Hitachi HTS545050B9A300, S/N:801130168383
Partition table type default to Intel
Disk /dev/sdb - 500 GB / 465 GiB - Hitachi HTS545050B9A300
Partition table type: Intel
Analyse Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Current partition structure:
No partition is bootable
Ask the user for vista mode
search_vista_part: 1
search_part()
Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
Command line: TestDisk
TestDisk 6.14-WIP, Data Recovery Utility, April 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7600)
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-04-21T15:07:46
ext2fs lib: 1.41.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20100226
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=119926685696
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\D:
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
filewin32_getfilesize(\\.\F:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\F:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\F:
Hard disk list
Disk /dev/sda - 120 GB / 111 GiB - CHS 15505 240 63, sector size=512 - HITACHI HTS541612J9SA00, S/N:2020202020204253443331343545344447414535, FW:SBDIC7UP
Partition table type (auto): Intel
TestDisk exited normally.
Sun May 6 17:29:53 2012
Command line: TestDisk
TestDisk 6.14-WIP, Data Recovery Utility, April 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7600)
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-04-21T15:07:46
ext2fs lib: 1.41.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20100226
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=120034123776
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=119926685696
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\D:
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\E:
filewin32_getfilesize(\\.\F:) GetFileSize err Incorrect function.
filewin32_setfilepointer(\\.\F:) SetFilePointer err Incorrect function.
Warning: can't get size for \\.\F:
Hard disk list
Disk /dev/sda - 120 GB / 111 GiB - CHS 15505 240 63, sector size=512 - HITACHI HTS541612J9SA00, S/N:2020202020204253443331343545344447414535, FW:SBDIC7UP
Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512 - Hitachi HTS545050B9A300, S/N:801130168383
Partition table type default to Intel
Disk /dev/sdb - 500 GB / 465 GiB - Hitachi HTS545050B9A300
Partition table type: Intel
Analyse Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Current partition structure:
No partition is bootable
Ask the user for vista mode
search_vista_part: 1
search_part()
Disk /dev/sdb - 500 GB / 465 GiB - CHS 60801 255 63
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
Re: hitachi 500gb is no longer accesible
There is no partition in your partition table anymore.
Testdisk.log was aborted.
Would it be possible to run Deeper Search?
It's not Quick Search.
Reason is, I assume that your boot sector could be overridden also.
That's why I'd like to try to find your backup of the boot sector and have a try to list your data.
If Deep Search finds your partition, then press p to have a try to list your files.
Please let me know, did you see your data or an error message?
Fiona
Testdisk.log was aborted.
Would it be possible to run Deeper Search?
It's not Quick Search.
Reason is, I assume that your boot sector could be overridden also.
That's why I'd like to try to find your backup of the boot sector and have a try to list your data.
If Deep Search finds your partition, then press p to have a try to list your files.
Please let me know, did you see your data or an error message?
Fiona
-
- Posts: 8
- Joined: 06 May 2012, 10:21
Re: hitachi 500gb is no longer accesible
Hi Fiona ,
I try deeper search but test disk did not find
Any partition .
Is there anything else we could try?
Thanks
Jay
I try deeper search but test disk did not find
Any partition .
Is there anything else we could try?
Thanks
Jay
Re: hitachi 500gb is no longer accesible
Would it be possible to zip and upload the testdisk.log?
If no partition was found, you can try to repeat Deeper Search using partition table type None.
It takes a little bit longer.
You'll find partition table type None after selecting your affected disk.
Please upload the log also.
You also can copy and paste the content of your log.
Fiona
If no partition was found, you can try to repeat Deeper Search using partition table type None.
It takes a little bit longer.
You'll find partition table type None after selecting your affected disk.
Please upload the log also.
You also can copy and paste the content of your log.
Fiona
-
- Posts: 8
- Joined: 06 May 2012, 10:21
Re: hitachi 500gb is no longer accesible
hi fiona ,
the attached file is a snapshot from deeper search with none option.
it has run about 24 percent now, however does the stats show any sign of successfull recovery.
thanks
jay
the attached file is a snapshot from deeper search with none option.
it has run about 24 percent now, however does the stats show any sign of successfull recovery.
thanks
jay
- Attachments
-
- testdisk..png (48.28 KiB) Viewed 6989 times
Re: hitachi 500gb is no longer accesible
The scan only provides some infos about FAT-partitions.
Please let it finish.
The backup of the boot sector is normally located at the end of the partition/volume.
I assum it was a NTFS partition?
Did you only use one partition using the whole space?
Fiona
Please let it finish.
The backup of the boot sector is normally located at the end of the partition/volume.
I assum it was a NTFS partition?
Did you only use one partition using the whole space?
Fiona