DDE inaccessible

Utiliser TestDisk pour réparer le système de fichier
Locked
Message
Author
unklefloyd
Posts: 3
Joined: 08 May 2012, 21:16

DDE inaccessible

#1 Post by unklefloyd »

Bonjour,
C'est mon premier post sur un forum.
J'ai un disque dur externe (WD 640 GB), branché sur mon ordinateur portable (qui fonctionne sous Vista).
En voulant créer une clé USB de boot XP pour un autre portable, et suite à une vraisemblable erreur de sélection de disque en utilisant WinSetUpFromUSB, j'ai dû formater le DDE au lieu de la clé USB.
N. B. : RMPARTUSB destroys all data on a USB device and creates a bootable partition on USB storage devices under Windows.
Depuis, à chaque fois que je veux accéder à mon DDE, j'ai le message suivant :
"vous devez formater le disque du lecteur J: avant de l'utiliser"
Sur la gestion de disques, il apparaît en RAW.
J'ai lancé TESTDISK (comment transmettre le fichier log ?).
J'aimerais bien si possible réparer, sinon récupérer plus de 500 Go de données.
Merci de m'indiquer la marche à suivre.

User avatar
remy
Posts: 457
Joined: 25 Mar 2012, 10:21
Location: Strasbourg, France.
Contact:

Re: DDE inaccessible

#2 Post by remy »

Le plus simple pour le fichier de log est de faire un copié/collé et de le mettre entre balises "code".

Donne le retour sinon (copié/collé, capture d'écran) des différentes étapes de l'analyse : current partition structure, Quicksearch, deepersearch.

Quelle était la taille de l'image pour la création de la clé USB ?

unklefloyd
Posts: 3
Joined: 08 May 2012, 21:16

Re: DDE inaccessible

#3 Post by unklefloyd »

Bonjour,
Dommage que l'on ne puisse pas joindre les fichiers (doc, etc...)
Revenant de congé, je récapitule :
Disque dur externe (WD 640 GB), branché sur pc portable (sous Vista).
En voulant créer une clé USB de boot XP pour un autre portable, et suite à une erreur de sélection de disque , j'ai formaté le DDE au lieu de la clé USB (en utilisant WinSetUpFromUSB) :

Code: Select all

•	WinSetupFromUSB démarre.
•	Dans le premier champ, choisissez le dossier contenant les fichiers d'installation de XP (le lecteur de CD, en général).
•	Dans le second champ, sélectionnez votre clé USB ou cliquez sur Refresh si elle n'est pas encore présente.
•	Vérifiez que l'option Removable est bien sélectionnée, vous devez avoir les même paramètres que dans l'image ci-dessous :


 

•	Cliquez sur RMPrepUSB.
•	Choisissez l'option NTFS.
•	Choisissez l'option Boot as HDD (2PTNS).
•	Choisissez l'option XP Bootable (NTDLR).
•	Au final, vous devez avoir les mêmes réglages que l'image ci-dessous :


 

•	Cliquez sur Prepare Drive pour formater la clé USB.

J’ai cliqué. Sachant que :
RMPARTUSB destroys all data on a USB device and creates a bootable partition on USB storage devices under Windows
Depuis, à chaque fois que je veux accéder à mon DDE, j'ai le message suivant : 
"vous devez formater le disque du lecteur J: avant de l'utiliser" 

Sur la gestion de disques, il apparaît ainsi : 
  

Je ne sais plus combien de Go étaient utilisés (pas mal en tout cas), ni si c'était NTFS ou FAT, mais l'important pour moi est la récupération des données (boulot et perso), fichiers, documents, photos, vidèos et musique.

J'ai branché le disque dur sur un autre ordinateur mais c'est pareil.
Partition Recovery Wizard donne ceci :
  

J'ai lancé TESTDISK :
Hard disk list
Disk /dev/sda - 200 GB / 186 GiB - CHS 24321 255 63, sector size=512 - TOSHIBA MK2035GSS, S/N:9 C7TNP5TY, FW:DK02
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63, sector size=512 - WD 6400AAV External, S/N:WD-WCAUF0302147, FW:1.65

Partition table type (auto): Intel
Disk /dev/sdd - 640 GB / 596 GiB - WD 6400AAV External
Partition table type: Intel

Analyse Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Geometry from i386 MBR: head=255 sector=63


test_FAT()
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
sector_size  0
cluster_size 0
reserved     0
fats         0
dir_entries  0
sectors      0
media        00
fat_length   0
secs_track   0
heads        0
hidden       0
total_sect   0
check_part_i386 failed for partition type 0C
BAD_RS LBA=8749743 16064
check_part_i386 2 type 21: no test
get_geometry_from_list_part_aux head=255 nbr=1
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=1
Current partition structure:
Invalid FAT boot sector
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63

Bad relative sector.
Space conflict between the following two partitions
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63
Ask the user for vista mode
search_vista_part: 1

search_part()
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Search for partition aborted

Results

interface_write()
 
No partition found or selected for recovery

search_part()
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
BAD_RS LBA=954056799 14100331
check_part_i386 failed for partition type 0C
     FAT32 LBA            59387  73 46 247137 223 20 3016213175
This partition ends after the disk limits. (start=954056799, size=3016213175, end=3970269973, disk end=1250263728)
NTFS at 77824/254/63
filesystem size           1250258562
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               78141160
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
     NTFS found using backup sector, blocksize=4096, 640 GB / 596 GiB
file_pread(5,2,buffer,1250265088(77825/102/38)) lseek err Invalid argument
file_pread(5,1,buffer,1250265088(77825/102/38)) lseek err Invalid argument
file_pread(5,8,buffer,1250263743(77825/81/16)) lseek err Invalid argument
file_pread(5,1,buffer,1250263743(77825/81/16)) lseek err Invalid argument
file_pread(5,8,buffer,1250263871(77825/83/18)) lseek err Invalid argument
file_pread(5,8,buffer,1250263999(77825/85/20)) lseek err Invalid argument
file_pread(5,8,buffer,1250264127(77825/87/22)) lseek err Invalid argument
file_pread(5,8,buffer,1250264255(77825/89/24)) lseek err Invalid argument
file_pread(5,8,buffer,1250264383(77825/91/26)) lseek err Invalid argument
file_pread(5,8,buffer,1250264511(77825/93/28)) lseek err Invalid argument
file_pread(5,8,buffer,1250264639(77825/95/30)) lseek err Invalid argument
file_pread(5,8,buffer,1250264767(77825/97/32)) lseek err Invalid argument
file_pread(5,8,buffer,1250264895(77825/99/34)) lseek err Invalid argument
file_pread(5,8,buffer,1250265023(77825/101/36)) lseek err Invalid argument
file_pread(5,1,buffer,1250265087(77825/102/37)) lseek err Invalid argument
file_pread(5,1,buffer,1250265088(77825/102/38)) lseek err Invalid argument
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (640 GB / 596 GiB) seems too small! (< 2032 GB / 1893 GiB)
The following partition can't be recovered:
     FAT32 LBA            59387  73 46 247137 223 20 3016213175
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2

Results
   * HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
     NTFS found using backup sector, blocksize=4096, 640 GB / 596 GiB
Can't open backup.log file: No such file or directory
interface_load


interface_write()
 1 * HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
simulate write!

write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition

Interface Advanced
Geometry from i386 MBR: head=255 sector=63


test_FAT()
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
sector_size  0
cluster_size 0
reserved     0
fats         0
dir_entries  0
sectors      0
media        00
fat_length   0
secs_track   0
heads        0
hidden       0
total_sect   0
check_part_i386 failed for partition type 0C
BAD_RS LBA=8749743 16064
check_part_i386 2 type 21: no test
get_geometry_from_list_part_aux head=255 nbr=1
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=1
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63

TestDisk exited normally.

J'aimerais bien si possible réparer (atteindre à nouveau mon DDE), sinon récupérer plus de 500 Go de données.
Merci de m'indiquer la marche à suivre.

unklefloyd
Posts: 3
Joined: 08 May 2012, 21:16

Re: DDE inaccessible

#4 Post by unklefloyd »

Correctif (images incluses, enfin j'espère) :

Code: Select all

Disque dur externe (WD 640 GB), branché sur pc portable (sous Vista).
En voulant créer une clé USB de boot XP pour un autre portable, et suite à une erreur de sélection de disque , j'ai formaté le DDE au lieu de la clé USB (en utilisant WinSetUpFromUSB) :
•	WinSetupFromUSB démarre.
•	Dans le premier champ, choisissez le dossier contenant les fichiers d'installation de XP (le lecteur de CD, en général).
•	Dans le second champ, sélectionnez votre clé USB ou cliquez sur Refresh si elle n'est pas encore présente.
•	Vérifiez que l'option Removable est bien sélectionnée, vous devez avoir les même paramètres que dans l'image ci-dessous :
Image

Code: Select all

•	Cliquez sur RMPrepUSB.
•	Choisissez l'option NTFS.
•	Choisissez l'option Boot as HDD (2PTNS).
•	Choisissez l'option XP Bootable (NTDLR).
•	Au final, vous devez avoir les mêmes réglages que l'image ci-dessous :
Image

Code: Select all

•	Cliquez sur Prepare Drive pour formater la clé USB.

J’ai cliqué. Sachant que :
RMPARTUSB destroys all data on a USB device and creates a bootable partition on USB storage devices under Windows
Depuis, à chaque fois que je veux accéder à mon DDE, j'ai le message suivant : 
"vous devez formater le disque du lecteur J: avant de l'utiliser" 

Sur la gestion de disques, il apparaît ainsi : 
Disque 3
De base          (J:)
596,17 Go       596,17 Go RAW
En ligne          Sain (Actif, Partition principale)

Je ne sais plus combien de Go étaient utilisés (pas mal en tout cas), ni si c'était NTFS ou FAT, mais l'important pour moi est la récupération des données (boulot et perso), fichiers, documents, photos, vidèos et musique.

J'ai branché le disque dur sur un autre ordinateur mais c'est pareil.
J'ai lancé TESTDISK :
Hard disk list
Disk /dev/sda - 200 GB / 186 GiB - CHS 24321 255 63, sector size=512 - TOSHIBA MK2035GSS, S/N:9 C7TNP5TY, FW:DK02
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63, sector size=512 - WD 6400AAV External, S/N:WD-WCAUF0302147, FW:1.65

Partition table type (auto): Intel
Disk /dev/sdd - 640 GB / 596 GiB - WD 6400AAV External
Partition table type: Intel

Analyse Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Geometry from i386 MBR: head=255 sector=63


test_FAT()
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
sector_size  0
cluster_size 0
reserved     0
fats         0
dir_entries  0
sectors      0
media        00
fat_length   0
secs_track   0
heads        0
hidden       0
total_sect   0
check_part_i386 failed for partition type 0C
BAD_RS LBA=8749743 16064
check_part_i386 2 type 21: no test
get_geometry_from_list_part_aux head=255 nbr=1
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=1
Current partition structure:
Invalid FAT boot sector
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63

Bad relative sector.
Space conflict between the following two partitions
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63
Ask the user for vista mode
search_vista_part: 1

search_part()
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Search for partition aborted

Results

interface_write()
 
No partition found or selected for recovery

search_part()
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
BAD_RS LBA=954056799 14100331
check_part_i386 failed for partition type 0C
     FAT32 LBA            59387  73 46 247137 223 20 3016213175
This partition ends after the disk limits. (start=954056799, size=3016213175, end=3970269973, disk end=1250263728)
NTFS at 77824/254/63
filesystem size           1250258562
sectors_per_cluster       8
mft_lcn                   786432
mftmirr_lcn               78141160
clusters_per_mft_record   -10
clusters_per_index_record 1
     HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
     NTFS found using backup sector, blocksize=4096, 640 GB / 596 GiB
file_pread(5,2,buffer,1250265088(77825/102/38)) lseek err Invalid argument
file_pread(5,1,buffer,1250265088(77825/102/38)) lseek err Invalid argument
file_pread(5,8,buffer,1250263743(77825/81/16)) lseek err Invalid argument
file_pread(5,1,buffer,1250263743(77825/81/16)) lseek err Invalid argument
file_pread(5,8,buffer,1250263871(77825/83/18)) lseek err Invalid argument
file_pread(5,8,buffer,1250263999(77825/85/20)) lseek err Invalid argument
file_pread(5,8,buffer,1250264127(77825/87/22)) lseek err Invalid argument
file_pread(5,8,buffer,1250264255(77825/89/24)) lseek err Invalid argument
file_pread(5,8,buffer,1250264383(77825/91/26)) lseek err Invalid argument
file_pread(5,8,buffer,1250264511(77825/93/28)) lseek err Invalid argument
file_pread(5,8,buffer,1250264639(77825/95/30)) lseek err Invalid argument
file_pread(5,8,buffer,1250264767(77825/97/32)) lseek err Invalid argument
file_pread(5,8,buffer,1250264895(77825/99/34)) lseek err Invalid argument
file_pread(5,8,buffer,1250265023(77825/101/36)) lseek err Invalid argument
file_pread(5,1,buffer,1250265087(77825/102/37)) lseek err Invalid argument
file_pread(5,1,buffer,1250265088(77825/102/38)) lseek err Invalid argument
Disk /dev/sdd - 640 GB / 596 GiB - CHS 77825 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (640 GB / 596 GiB) seems too small! (< 2032 GB / 1893 GiB)
The following partition can't be recovered:
     FAT32 LBA            59387  73 46 247137 223 20 3016213175
get_geometry_from_list_part_aux head=255 nbr=2
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=2

Results
   * HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
     NTFS found using backup sector, blocksize=4096, 640 GB / 596 GiB
Can't open backup.log file: No such file or directory
interface_load


interface_write()
 1 * HPFS - NTFS              0   1  1 77824 254 63 1250258562 [My Book]
simulate write!

write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition

Interface Advanced
Geometry from i386 MBR: head=255 sector=63


test_FAT()
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
sector_size  0
cluster_size 0
reserved     0
fats         0
dir_entries  0
sectors      0
media        00
fat_length   0
secs_track   0
heads        0
hidden       0
total_sect   0
check_part_i386 failed for partition type 0C
BAD_RS LBA=8749743 16064
check_part_i386 2 type 21: no test
get_geometry_from_list_part_aux head=255 nbr=1
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=1
 1 * FAT32 LBA                0   1  1 77825  80 62 1250263664
 2 P Sys=21                 544 164 52   544 165 51         63

TestDisk exited normally.
J'aimerais bien si possible réparer (atteindre à nouveau mon DDE), sinon récupérer plus de 500 Go de données.
Merci d'avance.

User avatar
remy
Posts: 457
Joined: 25 Mar 2012, 10:21
Location: Strasbourg, France.
Contact:

Re: DDE inaccessible

#5 Post by remy »

Il semble que testdisk retrouve une partition intéressante, nommée "My Book". Peux-tu essayer de liste (touche "P") cette partition pour voir quel est son état ?

Locked