As it was described already above Photorec doesn't see my 1T HDD on my iMac 2017 and shows only MacOs SSD partition. Really hoping on your help guys, thank in advance.
I have installed the brew and the program itself through it as well as I have the admin rights, but maybe I have done something wrong idk.
PhotoRec 7.1, Data Recovery Utility, July 2019
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
PhotoRec is free software, and
comes with ABSOLUTELY NO WARRANTY.
Select a media (use Arrow keys, then press Enter):
>Disk /dev/disk0 - 28 GB / 26 GiB (RO)
Disk /dev/rdisk0 - 28 GB / 26 GiB (RO)
>[Proceed ] [ Quit ]
Note:
Disk capacity must be correctly detected for a successful recovery.
If a disk listed above has an incorrect size, check HD jumper settings and BIOS
detection, and install the latest OS patches and disk drivers.
Photorec doesn't see my HDD and shows only MacOs partition.
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
-
recuperation
- Posts: 2735
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: Photorec doesn't see my HDD and shows only MacOs partition.
Does your Mac see the hard disk drive as a device at least?
-
recuperation
- Posts: 2735
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: Photorec doesn't see my HDD and shows only MacOs partition.
How does Testdisk and Photorec react when connecting your drive to a Windows machine?
Any results?
Any results?
Re: Photorec doesn't see my HDD and shows only MacOs partition.
I don't have any idea actually, because this actual hdd is embedded in the computer itself and I can't remove it without taking off the screen, there is an option to emulate this drive in so called "target disk mode" which actually just gonna convert a hdd to the basic storage drive, accessible through the thunderbolt cable which connected to another computer.
-
recuperation
- Posts: 2735
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: Photorec doesn't see my HDD and shows only MacOs partition.
I dont know what "idk" means.fast666 wrote: ↑29 Mar 2022, 09:54 As it was described already above Photorec doesn't see my 1T HDD on my iMac 2017 and shows only MacOs SSD partition. Really hoping on your help guys, thank in advance.
I have installed the brew and the program itself through it as well as I have the admin rights, but maybe I have done something wrong idk.
PhotoRec 7.1, Data Recovery Utility, July 2019
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
PhotoRec is free software, and
comes with ABSOLUTELY NO WARRANTY.
Select a media (use Arrow keys, then press Enter):
>Disk /dev/disk0 - 28 GB / 26 GiB (RO)
Disk /dev/rdisk0 - 28 GB / 26 GiB (RO)
>[Proceed ] [ Quit ]
Note:
Disk capacity must be correctly detected for a successful recovery.
If a disk listed above has an incorrect size, check HD jumper settings and BIOS
detection, and install the latest OS patches and disk drivers.
I don't know why your disk size is not recognized properly and have no idea what to do know.