Photorec Hang

Using PhotoRec to recover lost data
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
Adamnemurigenesis
Posts: 2
Joined: 31 Oct 2012, 14:23

Photorec Hang

#1 Post by Adamnemurigenesis »

Hi, I just used photorec to try recover data from my 1TB Samsung M2 HDD. At the recovery page, it hangs at a set number of files as shown in the picture enclosed.

Image

Is this normal or has there been a problem?

Adamnemurigenesis
Posts: 2
Joined: 31 Oct 2012, 14:23

Re: Photorec Hang

#2 Post by Adamnemurigenesis »

Photorec is running as normal, but it slowed down considerably, and now it says 3000+ hours remaining. Is this normal behavior?

User avatar
cgrenier
Site Admin
Posts: 5432
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: Photorec Hang

#3 Post by cgrenier »

If the disk contains a lot of bad sectors, data recovery may slow to a crawl
You may want to clone the disk to a new empty one with ddrescue as described in http://www.cgsecurity.org/wiki/Damaged_Hard_Disk and next run PhotoRec on the clone.

Locked