Need some help to recover lost partition.

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
moustaky
Posts: 2
Joined: 23 Mar 2013, 06:55

Need some help to recover lost partition.

#1 Post by moustaky »

Good evening.
I’m trying to save using TestDisk (16.4), my lost data from a damaged external HD.
But my knowledge is not enough for me to understand what am I actually doing, so I’m afraid to worse the situation.
Here are the steps I’ve done up to now, and the point in which I have stopped myself. Will anybody tell me whether I’m doing the right choices, and how I can go on?
I’m using windows7. The external disk is a Packard Bell Carbon.
Thanks in advance for any answer.
Greetings from Italy.

0) I created a new log file [Enter]
1) I selected the broken device [Proceed]
2) I selected [Intel] as partition table type
3) I chose the command [Analyse]
4) On the next page I selected [Quick Search]
5) At the end of the search it seemed I obtained nothing [enter]
6) Therefore on the next page I selected [Deeper Search] to look for more partitions
7) Even the deeper search hasn't found anything, so I chose to load backup [L]
8) I selected the first backup and then [Load]
9) Now I'm asked to select a partition. But here I stop because I don't know how to go on.
Which disk does it refer to? Which one do I need to select?
Have I done all right so far? And what shall I do now?

I loaded all the print screens here:
http://digilander.libero.it/canetibo/

Thanks again
Maurizio

moustaky
Posts: 2
Joined: 23 Mar 2013, 06:55

Re: Need some help to recover lost partition.

#2 Post by moustaky »

I join the log, maybe it helps.



Sat Mar 23 10:49:38 2013
Command line: TestDisk

TestDisk 6.14-WIP, Data Recovery Utility, September 2012
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7601) SP1
Compiler: GCC 4.6, Cygwin 1007.9
Compilation date: 2012-10-19T00:17:18
ext2fs lib: 1.42.2, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=250059350016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=1500299395072
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdc)=4142054400
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=250059350016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=1500299395072
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=4142054400
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=247575085056
filewin32_getfilesize(\\.\D:) GetFileSize err Funzione non corretta.

filewin32_setfilepointer(\\.\D:) SetFilePointer err Funzione non corretta.

Warning: can't get size for \\.\D:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\E:)=2147483648
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=1500298346496
filewin32_getfilesize(\\.\G:) GetFileSize err Funzione non corretta.

filewin32_setfilepointer(\\.\G:) SetFilePointer err Funzione non corretta.

Warning: can't get size for \\.\G:
Hard disk list
Disk /dev/sda - 250 GB / 232 GiB - CHS 30401 255 63, sector size=512 - TOSHIBA MK2561GSYN, S/N:2020202020202020202033203831545845325432, FW:MH000C
Disk /dev/sdb - 1500 GB / 1397 GiB - CHS 182401 255 63, sector size=512 - WD Ext HDD 1021, S/N:WMAVU2876354, FW:2002
Disk /dev/sdc - 4142 MB / 3950 MiB - CHS 503 255 63, sector size=512 - Packard Bell Carbon, FW:0000

Partition table type default to Intel
Disk /dev/sdc - 4142 MB / 3950 MiB - Packard Bell Carbon
Partition table type: Intel

Analyse Disk /dev/sdc - 4142 MB / 3950 MiB - CHS 503 255 63
Current partition structure:

Partition: Read error

search_part()
Disk /dev/sdc - 4142 MB / 3950 MiB - CHS 503 255 63
file_pread(6,16,buffer,32(0/0/33)) ReadFile Errore nei dati (controllo di ridondanza ciclico).

(...) [cut more than 100.000 similar lines]

file_pread(6,3,buffer,7972927(496/74/26)) ReadFile Errore nei dati (controllo di ridondanza ciclico).

Locked