raid 0 Lsi card

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
altrolliet
Posts: 3
Joined: 07 Apr 2013, 06:30

raid 0 Lsi card

#1 Post by altrolliet »

Hello, after an unknown problem my raid card LSI lost my config 4ssd in raid 0.
I recreated my raid with my lsi card manually
But I can’t boot.


Sat Apr 6 22:11:51 2013
Command line: TestDisk

TestDisk 6.13, Data Recovery Utility, November 2011
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Windows 7 (7600)
Compiler: GCC 4.3, Cygwin 1007.7
Compilation date: 2011-11-15T08:36:54
ext2fs lib: 1.41.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20100226
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=600127266816
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=1022067998720
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdc)=357958680576
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdd)=2004877312
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=600127266816
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=1022067998720
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=357958680576
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive3)=2004877312
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=599886135296
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=35260416
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\E:)=2004860928
file_pread(4,1,buffer,1172134529(72961/254/63)) lseek err Invalid argument
file_pread(5,1,buffer,1996236899(124259/254/63)) lseek err Invalid argument
file_pread(6,1,buffer,699148799(43519/254/63)) lseek err Invalid argument
file_pread(7,1,buffer,3919859(243/254/63)) lseek err Invalid argument
Hard disk list
Disk /dev/sda - 600 GB / 558 GiB - CHS 72961 255 63, sector size=512 - WDC WD6000HLHX-01JJPV0, S/N:2020202057202d44585731473343453035373231, FW:04.05G04
Disk /dev/sdb - 1022 GB / 951 GiB - CHS 124259 255 63, sector size=512 - LSI MR9260-8i, S/N:002f1c551b634ae318f09df102b00506, FW:2.70
Disk /dev/sdc - 357 GB / 333 GiB - CHS 43519 255 63, sector size=512 - LSI MR9260-8i, S/N:006c67551b634ae318f09df102b00506, FW:2.70
Disk /dev/sdd - 2004 MB / 1912 MiB - CHS 243 255 63, sector size=512 - USB Flash Disk, S/N:AA00000000000485, FW:1100
Drive D: - 35 MB / 33 MiB - CHS 8 64 32, sector size=2048 - ASUS BC-08B1LT, FW:1.03

Partition table type (auto): Intel
Disk /dev/sdc - 357 GB / 333 GiB - LSI MR9260-8i
Partition table type: Intel

Analyse Disk /dev/sdc - 357 GB / 333 GiB - CHS 43519 255 63
Current partition structure:

Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sdc - 357 GB / 333 GiB - CHS 43520 255 63
Allow partial last cylinder : Yes
search_vista_part: 1

search_part()
Disk /dev/sdc - 357 GB / 333 GiB - CHS 43520 255 63
BAD_RS LBA=205054479 4391120
check_part_i386 failed for partition type 01
FAT12 12764 13 1 118241 184 39 1694498817
This partition ends after the disk limits. (start=205054479, size=1694498817, end=1899553295, disk end=699148800)
file_pread(6,7,buffer,699138049(43519/84/23)) lseek err Invalid argument
file_pread(6,8,buffer,699138056(43519/84/30)) lseek err Invalid argument
file_pread(6,3,buffer,699138064(43519/84/38)) lseek err Invalid argument
file_pread(6,3,buffer,699138111(43519/85/22)) lseek err Invalid argument
file_pread(6,8,buffer,699138127(43519/85/38)) lseek err Invalid argument
file_pread(6,11,buffer,699138174(43519/86/22)) lseek err Invalid argument
file_pread(6,2,buffer,699140096(43519/116/54)) lseek err Invalid argument
Disk /dev/sdc - 357 GB / 333 GiB - CHS 43520 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (357 GB / 333 GiB) seems too small! (< 972 GB / 905 GiB)
The following partition can't be recovered:
FAT12 12764 13 1 118241 184 39 1694498817

Results

interface_write()

No partition found or selected for recovery

User avatar
Fiona
Posts: 2835
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: raid 0 Lsi card

#2 Post by Fiona »

The current size of your array is 357 GB.
Is this exactly the same size like before?

Fiona

altrolliet
Posts: 3
Joined: 07 Apr 2013, 06:30

Re: raid 0 Lsi card

#3 Post by altrolliet »

I dont know exactly but it's 4X80Gb.

Locked