How to recover 2 x 500gb disks configured in raid0

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read
Posts: 2
Joined: 06 Aug 2013, 20:40

How to recover 2 x 500gb disks configured in raid0

#1 Post by DJRobin »

Dear guests,

First of all I post this topic because I don't know where to begin.
I hope someone can help me.

I have a NAS (Iomega IX2 center) with 2 x 500GB Sata drives.
The problem I have with this drives is that I can't connect to them with the networkdrive.
I saw that the Iomega IX2 center led was blinking red so , I took the center apart to look to the problem.
When I attach the 2 drives with a sata to usb converter windows don't see the drives in explorer.
In the disk management console I can see the drive but without drive letters.
I just see 2 partitions : one of 996mb and one of 464,79gb both are primary partitions

I'm not familiar with this program and I read on the wiki page that you can recover partition tables and I searched for it with the program but I'm stuck now.

I hope someone could help me.

Thanks in advance.