cgsecurity.org

Hello everybody,

This week I decided to revisit an old stored laptop in my house and Windows failed to boot with the screen below

https://miro.medium.com/max/700/1*RmCHI ... EZbPA.jpeg

Any chosen option rebooted the system again in an ever unbootable cycle. Next I Googled the problem and tried to execute chkdsk /f /r after booting with command prompt and saw the message below

CHKDSK cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume <Y/N>

The disk could have something important I didn't remember. But just in case I chose not to dismount this 80 Gb HDD and transferred it to a docking station to see more details. To my complete surprise Windows Disk Management and Windows Explorer both saw it normally as if it didn't have any problem at all according to the attached picture. I then copied all of its contents in order to rescue any files possibly important to me.
Next I ran TestDisk and it looked like an ordinary healthy disk too. Just in case I ran the "Rebuild BS" command in an attempt to rescue this unknown Windows installation. Despite not knowing which Windows version was installed, I can assure it was Windows 7, 8.1 or 10 because of the laptop manufacture date.

Next I transferred back this HDD to its original source (the old stored laptop) and tried to boot Windows again unsuccessfully. I ran chkdsk again to see the same message cited above

CHKDSK cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume <Y/N>

Now, with all my files backed up, I answered YES to the dismount volume option. Now this disk is no longer readable in its original machine nor in my docking station and I don't know what else coulde be done.

Any help is greatly appreciated.

LOG RESULTS BELOW


smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-w10-b19042] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD800BEVS-60RST0
Serial Number: WD-WXCX07193017
LU WWN Device Id: 5 0014ee 2560b0097
Firmware Version: 04.01G04
User Capacity: 80.026.361.856 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Dec 29 19:18:32 2020 HB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 3600) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 49) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 199 199 051 - 9829
3 Spin_Up_Time PO---- 161 157 021 - 950
4 Start_Stop_Count -O--CK 096 096 000 - 4787
5 Reallocated_Sector_Ct PO--CK 173 173 140 - 214
7 Seek_Error_Rate POSR-- 200 200 051 - 0
9 Power_On_Hours -O--CK 094 094 000 - 4487
10 Spin_Retry_Count PO--C- 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 051 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 3849
187 Reported_Uncorrect -O--CK 085 001 000 - 10008
188 Command_Timeout -O--CK 100 098 000 - 11
190 Airflow_Temperature_Cel -O---K 069 045 040 - 31
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1008
193 Load_Cycle_Count -O--CK 179 179 000 - 65856
194 Temperature_Celsius -O---K 112 088 000 - 31
196 Reallocated_Event_Count -O--CK 056 056 000 - 144
197 Current_Pending_Sector -O--C- 176 176 000 - 322
198 Offline_Uncorrectable ----C- 100 253 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 9944 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 9944 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 9a 25 06 05 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 e6 01 f9 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 26 25 05 ee 00 00 00 3f 03 00 00 00 00:06:28.657 [RESERVED]
00 00 03 00 3f 05 f0 01 e2 25 00 00 00 00:00:16.129 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9943 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 e6 25 05 f9 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 31 01 ee 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
00 f0 25 05 e2 00 01 00 3f 03 00 00 01 00:06:28.646 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 39 01 d7 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9942 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 31 25 05 ee 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 01 03 00 3f 05 26 00 ee 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 39 25 05 d7 00 00 00 3f 03 00 00 01 00:06:25.776 [RESERVED]
00 08 03 00 5f 05 38 01 d7 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9941 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 f0 25 05 e2 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 39 01 d7 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 06 25 05 cc 00 08 00 5f 03 00 00 01 00:06:22.776 [RESERVED]
00 00 03 00 3f 05 4a 01 c0 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9940 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 39 25 05 d7 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 03 00 5f 05 38 01 d7 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 4a 25 05 c0 00 00 00 3f 03 00 00 01 00:06:19.910 [RESERVED]
00 00 03 00 3f 05 20 01 b5 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9939 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 06 25 05 cc 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 4a 01 c0 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 5b 25 05 a9 00 00 00 3f 03 00 00 01 00:06:14.048 [RESERVED]
00 00 03 00 3f 05 2b 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9938 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 4a 25 05 c0 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 20 01 b5 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 2b 25 05 9e 00 00 00 3f 03 00 00 01 00:06:11.035 [RESERVED]
00 00 03 00 3f 05 20 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9937 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 20 25 05 b5 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 5b 01 a9 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 20 25 05 9e 00 00 00 3f 03 00 00 01 00:06:08.171 [RESERVED]
00 00 03 00 3f 05 1e 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9936 [23] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 5b 25 05 a9 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 2b 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 1e 25 05 9e 00 00 00 3f 03 00 00 01 00:06:08.160 [RESERVED]
00 00 03 00 3f 05 11 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9935 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 2b 25 05 9e 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 03 00 3f 05 20 01 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]
01 11 25 05 9e 00 00 00 3f 03 00 00 01 00:06:08.158 [RESERVED]
00 00 03 00 3f 05 03 00 9e 25 00 00 00 00:00:16.128 NOP [Reserved subcommand] [OBS-ACS-2]

Error 9934 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e9 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 0f c8 36 72 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 97 36 0f 09 72 c8 00 00 00 00:00:40.712 NOP [Abort queued commands]
09 0f c8 36 72 00 08 00 8f 00 00 00 09 00:59:28.143 [RESERVED]
00 08 00 00 7f 36 0e 09 72 c8 00 00 00 00:00:34.568 NOP [Abort queued commands]

Error 9933 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e9 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 c4 c8 36 65 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 e7 36 c0 09 65 c8 00 00 00 00:00:26.496 NOP [Abort queued commands]
09 bc c8 36 65 00 80 00 67 00 00 00 09 00:59:24.990 [RESERVED]
00 80 00 00 67 36 b9 09 65 c8 00 00 00 00:00:59.264 NOP [Abort queued commands]

Error 9932 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
01 -- 00 01 00 00 51 00 00 e9 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 b1 c8 1a d4 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 df 1a b1 09 d4 c8 00 00 00 00:00:59.144 NOP [Abort queued commands]
09 b1 c8 1a d4 00 08 00 d7 00 00 00 09 00:29:18.385 [RESERVED]
00 08 00 00 c7 1a b0 09 d4 c8 00 00 00 00:00:53.000 NOP [Abort queued commands]

Error 9931 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
01 -- 00 01 00 00 51 00 00 e9 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 8f c8 1a c9 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 07 1a 8d 09 c9 c8 00 00 00 00:00:34.688 NOP [Abort queued commands]
09 89 c8 1a c9 00 80 00 87 00 00 00 09 00:29:15.531 [RESERVED]
00 80 00 00 87 1a 87 09 c9 c8 00 00 00 00:00:01.920 NOP [Abort queued commands]

Error 9930 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e1 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 bc c8 0f 5b 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 5f 0f bb 01 5b c8 00 00 00 00:00:16.128 NOP [Abort queued commands]
01 70 c8 0f 4f 00 00 00 3f 00 00 00 01 00:16:43.387 [RESERVED]
00 00 00 00 3f 0f 62 01 4f c8 00 00 00 00:00:16.128 NOP [Abort queued commands]

Error 9929 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e1 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 7b c8 0f 4f 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 3f 0f 70 01 4f c8 00 00 00 00:00:16.128 NOP [Abort queued commands]
01 56 c8 0f 4f 00 00 00 3f 00 00 00 01 00:16:43.362 [RESERVED]
00 00 00 00 3f 0f 47 00 4f c8 00 00 00 00:00:16.128 NOP [Abort queued commands]

Error 9928 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 8c 25 0e c5 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 88 00 00 67 0e 8b 00 c5 35 00 00 00 00:00:22.272 NOP [Abort queued commands]
09 71 25 0e ae 00 00 00 57 00 00 00 09 00:16:05.045 [RESERVED]
00 08 00 00 97 0e 71 00 ae 35 00 00 00 00:00:22.272 NOP [Abort queued commands]

Error 9927 [14] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 b5 25 0e b9 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 57 0e 71 09 ae 25 00 00 00 00:00:22.272 NOP [Abort queued commands]
00 2a 25 0e a3 00 08 00 97 00 00 00 09 00:16:02.161 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 57 0e 17 09 a3 25 00 00 00 00:00:22.272 NOP [Abort queued commands]

Error 9926 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 71 25 0e ae 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 08 00 00 97 0e 71 00 ae 35 00 00 00 00:00:22.272 NOP [Abort queued commands]
09 17 25 0e a3 00 00 00 57 00 00 00 09 00:15:59.274 [RESERVED]
00 00 00 00 57 0e ec 09 a2 25 00 00 00 00:00:22.272 NOP [Abort queued commands]

Error 9925 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 2a 25 0e a3 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 57 0e 17 09 a3 25 00 00 00 00:00:22.272 NOP [Abort queued commands]
09 d2 25 0e a2 00 00 00 57 00 00 00 09 00:15:59.212 [RESERVED]
00 00 00 00 57 0e 81 09 96 25 00 00 00 00:00:22.272 NOP [Abort queued commands]

Error 9924 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 81 25 0e 96 00 00 00 00 00 00 00 09 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 57 0e 6d 09 96 25 00 00 00 00:00:22.272 NOP [Abort queued commands]
09 2d 25 0e 96 00 00 00 57 00 00 00 09 00:15:55.981 [RESERVED]
00 00 00 00 57 0e 1c 09 96 25 00 00 00 00:00:22.272 NOP [Abort queued commands]

Error 9923 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 80 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 a7 25 54 cc 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 3f 54 74 01 c1 25 00 00 00 00:00:16.256 NOP [Abort queued commands]
01 7d 25 54 a9 00 80 00 3f 00 00 00 01 01:32:31.418 [RESERVED]
00 80 00 00 bf 54 7b 01 a9 25 00 00 00 00:00:16.256 NOP [Abort queued commands]

Error 9922 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 80 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 74 25 54 c1 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 3f 54 3a 01 b5 25 00 00 00 00:00:16.256 NOP [Abort queued commands]
01 7b 25 54 a9 00 80 00 3f 00 00 00 01 01:32:28.413 [RESERVED]
00 80 00 00 3f 54 b6 01 9d 25 00 00 00 00:00:49.024 NOP [Abort queued commands]

Error 9921 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 80 00 51 00 00 e0 01 00 00

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 3a 25 54 b5 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 3f 54 7d 01 a9 25 00 00 00 00:00:16.256 NOP [Abort queued commands]
01 b6 25 54 9d 00 80 00 bf 00 00 00 01 01:32:28.411 [RESERVED]
00 08 00 00 5f 54 b5 01 9d 25 00 00 00 00:00:16.256 NOP [Abort queued commands]

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 4487 27680031

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max Temperature: -1/26 Celsius
Lifetime Min/Max Temperature: 0/ 0 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/65 Celsius
Min/Max Temperature Limit: 1/70 Celsius
Temperature History Size (Index): 128 (59)

Index Estimated Time Temperature Celsius
60 2020-12-29 17:11 ? -
... ..( 4 skipped). .. -
65 2020-12-29 17:16 ? -
66 2020-12-29 17:17 18 -
67 2020-12-29 17:18 ? -
68 2020-12-29 17:19 20 *
69 2020-12-29 17:20 ? -
70 2020-12-29 17:21 22 ***
71 2020-12-29 17:22 ? -
72 2020-12-29 17:23 22 ***
73 2020-12-29 17:24 ? -
74 2020-12-29 17:25 ? -
75 2020-12-29 17:26 22 ***
76 2020-12-29 17:27 ? -
77 2020-12-29 17:28 ? -
78 2020-12-29 17:29 18 -
79 2020-12-29 17:30 ? -
... ..( 2 skipped). .. -
82 2020-12-29 17:33 ? -
83 2020-12-29 17:34 18 -
84 2020-12-29 17:35 ? -
... ..( 3 skipped). .. -
88 2020-12-29 17:39 ? -
89 2020-12-29 17:40 18 -
90 2020-12-29 17:41 ? -
91 2020-12-29 17:42 19 -
92 2020-12-29 17:43 ? -
93 2020-12-29 17:44 ? -
94 2020-12-29 17:45 16 -
95 2020-12-29 17:46 ? -
96 2020-12-29 17:47 ? -
97 2020-12-29 17:48 16 -
98 2020-12-29 17:49 ? -
99 2020-12-29 17:50 ? -
100 2020-12-29 17:51 ? -
101 2020-12-29 17:52 18 -
102 2020-12-29 17:53 ? -
103 2020-12-29 17:54 18 -
104 2020-12-29 17:55 ? -
105 2020-12-29 17:56 22 ***
106 2020-12-29 17:57 ? -
107 2020-12-29 17:58 18 -
108 2020-12-29 17:59 ? -
109 2020-12-29 18:00 ? -
110 2020-12-29 18:01 ? -
111 2020-12-29 18:02 18 -
112 2020-12-29 18:03 ? -
... ..( 2 skipped). .. -
115 2020-12-29 18:06 ? -
116 2020-12-29 18:07 18 -
117 2020-12-29 18:08 ? -
118 2020-12-29 18:09 24 *****
119 2020-12-29 18:10 ? -
120 2020-12-29 18:11 18 -
121 2020-12-29 18:12 ? -
122 2020-12-29 18:13 20 *
123 2020-12-29 18:14 ? -
124 2020-12-29 18:15 22 ***
125 2020-12-29 18:16 ? -
126 2020-12-29 18:17 22 ***
127 2020-12-29 18:18 ? -
0 2020-12-29 18:19 22 ***
1 2020-12-29 18:20 ? -
2 2020-12-29 18:21 22 ***
3 2020-12-29 18:22 ? -
4 2020-12-29 18:23 22 ***
5 2020-12-29 18:24 ? -
6 2020-12-29 18:25 24 *****
7 2020-12-29 18:26 ? -
8 2020-12-29 18:27 26 *******
9 2020-12-29 18:28 ? -
10 2020-12-29 18:29 26 *******
11 2020-12-29 18:30 ? -
12 2020-12-29 18:31 28 *********
13 2020-12-29 18:32 ? -
14 2020-12-29 18:33 29 **********
15 2020-12-29 18:34 ? -
... ..( 2 skipped). .. -
18 2020-12-29 18:37 ? -
19 2020-12-29 18:38 25 ******
20 2020-12-29 18:39 ? -
21 2020-12-29 18:40 28 *********
22 2020-12-29 18:41 ? -
23 2020-12-29 18:42 26 *******
24 2020-12-29 18:43 ? -
25 2020-12-29 18:44 28 *********
26 2020-12-29 18:45 ? -
27 2020-12-29 18:46 28 *********
28 2020-12-29 18:47 ? -
29 2020-12-29 18:48 32 *************
30 2020-12-29 18:49 ? -
31 2020-12-29 18:50 32 *************
32 2020-12-29 18:51 ? -
33 2020-12-29 18:52 32 *************
34 2020-12-29 18:53 ? -
35 2020-12-29 18:54 28 *********
36 2020-12-29 18:55 ? -
37 2020-12-29 18:56 26 *******
38 2020-12-29 18:57 ? -
39 2020-12-29 18:58 30 ***********
40 2020-12-29 18:59 ? -
41 2020-12-29 19:00 30 ***********
42 2020-12-29 19:01 ? -
43 2020-12-29 19:02 40 *********************
44 2020-12-29 19:03 ? -
45 2020-12-29 19:04 36 *****************
46 2020-12-29 19:05 ? -
47 2020-12-29 19:06 26 *******
48 2020-12-29 19:07 ? -
49 2020-12-29 19:08 28 *********
50 2020-12-29 19:09 ? -
51 2020-12-29 19:10 24 *****
52 2020-12-29 19:11 ? -
... ..( 2 skipped). .. -
55 2020-12-29 19:14 ? -
56 2020-12-29 19:15 26 *******
57 2020-12-29 19:16 ? -
58 2020-12-29 19:17 26 *******
59 2020-12-29 19:18 ? -

SCT Error Recovery Control:
Read: 75 (7,5 seconds)
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x8000 4 1093 Vendor specific

Your drive has 214 unreadable sectors that were already remapped due to write commands to them.
Another 322 are unreadable:

1 Raw_Read_Error_Rate POSR-- 199 199 051 - 9829
5 Reallocated_Sector_Ct PO--CK 173 173 140 - 214
187 Reported_Uncorrect -O--CK 085 001 000 - 10008
196 Reallocated_Event_Count -O--CK 056 056 000 - 144
197 Current_Pending_Sector -O--C- 176 176 000 - 322

Your drive is dammaged.
Duplicate your drive using ddrescue as described in the manual.