Partition lost after changing USB disk drive enclosure

How to use TestDisk to recover lost partition
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
vince153
Posts: 3
Joined: 08 Dec 2021, 21:14

Partition lost after changing USB disk drive enclosure

#1 Post by vince153 »

Hello,

I also posted this topic in the french section. I'm looking for help so I also try in this section :o

I recently change the failing enclosure of my disk (power supply issues, sometimes disk not detected)

I wanted to use my USB disk dock to transfert data on a brand new USB drive.

Whe I connected the old disk through the dock, Windows asked me to initialize. After doing that, the partition was missing.

I ran testdisk and have the following issue :

BAD_RS LBA=3967470864 263608
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 04
FAT16 <32M 246963 163 1 498365 44 22 4038765655
This partition ends after the disk limits. (start=3967470864, size=4038765655, end=8006236518, disk end=1953525167)

Here is the complete log

Wed Dec 8 21:18:21 2021
Command line: TestDisk

TestDisk 7.2-WIP, Data Recovery Utility, September 2021
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
OS: Windows 8 (9200)
Compiler: GCC 11.2, Cygwin32 3001.4
ext2fs lib: 1.45.3, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: 20140608, curses lib: ncurses 6.1
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=240057409536
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=2097152000000
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive2)=1000204885504
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=238524283904
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=2097085792256
Hard disk list
Disk \\.\PhysicalDrive0 - 240 GB / 223 GiB - CHS 29185 255 63, sector size=512 - Corsair Force LE SSD, S/N:161380190001041600EC, FW:SAFC12.2
Disk \\.\PhysicalDrive1 - 2097 GB / 1953 GiB - CHS 254964 255 63, sector size=512 - VendorCo ProductCode, S/N:6021651033467709313, FW:2.00
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63, sector size=512 - Generic External, S/N:WD-WCAV5K002003, FW:1.14

Partition table type defaults to Intel
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - Generic External
Partition table type: Intel

Analyse Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
Current partition structure:
No partition is bootable

search_part()
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
BAD_RS LBA=3967470864 263608
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 04
FAT16 <32M 246963 163 1 498365 44 22 4038765655
This partition ends after the disk limits. (start=3967470864, size=4038765655, end=8006236518, disk end=1953525167)
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
Check the harddisk size: HD jumper settings, BIOS detection...
The harddisk (1000 GB / 931 GiB) seems too small! (< 4099 GB / 3817 GiB)
The following partition can't be recovered:
FAT16 <32M 246963 163 1 498365 44 22 4038765655

Results

interface_write()

No partition found or selected for recovery

search_part()
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
BAD_RS LBA=3967470864 263608
check_FAT: can't read FAT boot sector
check_part_i386 failed for partition type 04
FAT16 <32M 246963 163 1 498365 44 22 4038765655
This partition ends after the disk limits. (start=3967470864, size=4038765655, end=8006236518, disk end=1953525167)
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
Check the harddisk size: HD jumper settings, BIOS detection...
The harddisk (1000 GB / 931 GiB) seems too small! (< 4099 GB / 3817 GiB)
The following partition can't be recovered:
FAT16 <32M 246963 163 1 498365 44 22 4038765655

Results

interface_write()

No partition found or selected for recovery
simulate write!

write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition

Analyse Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
Current partition structure:
No partition is bootable

search_part()
Disk \\.\PhysicalDrive2 - 1000 GB / 931 GiB - CHS 121601 255 63
Search for partition aborted

Results

interface_write()

No partition found or selected for recovery
SIGHUP detected! PhotoRec has been killed.
Can someone help me to recover the partition or data please ?

Thanks for your help

Locked