meine Backup Festplatte (Hergestellt März 2020) will plötzlich keine Daten mehr lesen. Es ist zum kotzen.
Die Festplatte war ein paar Monate unbenutzt und jetzt kommen S.M.A.R.T. Fehler.
Jetzt versuche ich ein Disk Image zu erstellen und daraus die Daten zu lesen.
Code: Select all
dd if=/dev/sdd2 | pv -s 3700G | dd of="/media/sdc2/Backup/WD40PURZ-85TTDY0 Aufnahmen 20200603/image.img"
ETA 13 Stunden max. 5 MiB/s
Code: Select all
Sun Jan 2 12:50:25 2022
Command line: TestDisk
TestDisk 7.1-WIP, Data Recovery Utility, August 2016
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Linux, kernel 4.19.11-pmagic64 (#1 SMP Fri Dec 21 07:23:14 CST 2018) x86_64
Compiler: GCC 5.3
ext2fs lib: 1.44.5, ntfs lib: libntfs-3g, reiserfs lib: 0.3.0.5, ewf lib: 20140608, curses lib: ncurses 5.9
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size 500118192 sectors
/dev/sda: user_max 500118192 sectors
/dev/sda: native_max 500118192 sectors
/dev/sda: dco 500118192 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 0 sectors, sector size=512
Hard disk list
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63, sector size=512 - KINGSTON RBU-SNS8152S3256GG2, S/N:50026B7263019432, FW:SAFM01.R
Disk /dev/sdb - 31 GB / 28 GiB - CHS 29600 64 32, sector size=512 - ADATA USB Flash Drive, FW:1100
Disk /dev/sdc - 10000 GB / 9314 GiB - CHS 1215865 255 63, sector size=512 - asmedia ASM1153E
Disk /dev/sdd - 4000 GB / 3726 GiB - CHS 486401 255 63, sector size=512 - WDC WD40 PURZ-85TTDY0
Partition table type (auto): EFI GPT
Disk /dev/sdd - 4000 GB / 3726 GiB - WDC WD40 PURZ-85TTDY0
Partition table type: EFI GPT
Analyse Disk /dev/sdd - 4000 GB / 3726 GiB - CHS 486401 255 63
hdr_size=92
hdr_lba_self=1
hdr_lba_alt=7814037167 (expected 7814037167)
hdr_lba_start=34
hdr_lba_end=7814037134
hdr_lba_table=2
hdr_entries=128
hdr_entsz=128
check_part_gpt failed for partition
1 P MS Reserved 34 262177 262144 [Microsoft reserved partition]
Current partition structure:
No FAT, NTFS, ext2, JFS, Reiser, cramfs or XFS marker
1 P MS Reserved 34 262177 262144 [Microsoft reserved partition]
1 P MS Reserved 34 262177 262144 [Microsoft reserved partition]
2 P MS Data 264192 7814035455 7813771264 [Basic data partition] [Aufnahmen 20200603]
Failed to open $Secure: No such file or directory
ntfs_mst_post_read_fixup_warn: magic: 0x000000c8 size: 1024 usa_ofs: 0 usa_count: 0: Invalid argument
Record 206 has no FILE magic (0xc8)
ntfs_mst_post_read_fixup_warn: magic: 0x000000c8 size: 1024 usa_ofs: 0 usa_count: 0: Invalid argument
Record 206 has no FILE magic (0xc8)
ntfs_mst_post_read_fixup_warn: magic: 0x000000c8 size: 1024 usa_ofs: 0 usa_count: 0: Invalid argument
Record 206 has no FILE magic (0xc8)
Failed to open $Secure: No such file or directory
ntfs_mst_post_read_fixup_warn: magic: 0x000000c8 size: 1024 usa_ofs: 0 usa_count: 0: Invalid argument
Record 206 has no FILE magic (0xc8)
search_part()
Disk /dev/sdd - 4000 GB / 3726 GiB - CHS 486401 255 63
NTFS at 16/113/34
filesystem size 7813771264
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=135266304, part_size=4000650887168, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
NTFS at 16/113/34
filesystem size 7813771264
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
MS Data 264192 7814035455 7813771264 [Aufnahmen 20200603]
NTFS, blocksize=4096, 4000 GB / 3725 GiB
Results
P MS Data 264192 7814035455 7813771264 [Aufnahmen 20200603]
NTFS, blocksize=4096, 4000 GB / 3725 GiB
Hint for advanced users: dmsetup may be used if you prefer to avoid rewriting the partition table for the moment:
echo "0 7813771264 linear /dev/sdd 264192" | dmsetup create test0
ntfs_device_testdisk_io_ioctl() unimplemented
ntfs_device_testdisk_io_ioctl() unimplemented
NTFS filesystem needs to be repaired.
dir_partition inode=5
P MS Data 264192 7814035455 7813771264 [Aufnahmen 20200603]
NTFS, blocksize=4096, 4000 GB / 3725 GiB
ntfs_readdir failed for cluster 5: Input/output error
Directory /
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 .
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 ..
ntfs_readdir failed for cluster 5: Input/output error
Directory /
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 .
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 ..
ntfs_readdir failed for cluster 5: Input/output error
Directory /
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 .
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 ..
ntfs_device_testdisk_io_ioctl() unimplemented
ntfs_device_testdisk_io_ioctl() unimplemented
NTFS filesystem needs to be repaired.
dir_partition inode=5
P MS Data 264192 7814035455 7813771264 [Aufnahmen 20200603]
NTFS, blocksize=4096, 4000 GB / 3725 GiB
ntfs_readdir failed for cluster 5: Input/output error
Directory /
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 .
5 dr-xr-xr-x 0 0 0 2-Jan-2022 03:04 ..
interface_write()
1 P MS Data 264192 7814035455 7813771264 [Aufnahmen 20200603]
Code: Select all
Disk /dev/sdd: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Disk model: PURZ-85TTDY0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
Disklabel type: gpt
Disk identifier: 5A93C8C0-A20F-4AAF-BACE-BC4BAC12981E
Device Start End Sectors Size Type
/dev/sdd1 34 262177 262144 128M Microsoft reserved
/dev/sdd2 264192 7814035455 7813771264 3.7T Microsoft basic data
Partition 1 does not start on physical sector boundary.
Code: Select all
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.11-pmagic64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40PURZ-85TTDY0
Serial Number: WD-WCC7K1XL6UAA
LU WWN Device Id: 5 0014ee 2bd00cca4
Firmware Version: 80.00A80
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 2 13:36:53 2022 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (43380) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 461) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 171 170 021 - 6450
4 Start_Stop_Count -O--CK 100 100 000 - 193
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 093 093 000 - 5457
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 33
192 Power-Off_Retract_Count -O--CK 200 200 000 - 8
193 Load_Cycle_Count -O--CK 200 200 000 - 184
194 Temperature_Celsius -O---K 107 104 000 - 43
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 56 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 57 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 57 [8] occurred at disk power-on lifetime: 5456 hours (227 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 10 7a 40 00 Error: UNC at LBA = 0x0061107a = 6361210
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 00 61 10 70 40 00 00:09:16.152 READ FPDMA QUEUED
60 04 00 00 08 00 00 00 61 0c 70 40 00 00:09:16.152 READ FPDMA QUEUED
60 04 00 00 08 00 00 00 61 08 70 40 00 00:09:16.136 READ FPDMA QUEUED
60 04 00 00 00 00 00 00 61 04 70 40 00 00:09:16.136 READ FPDMA QUEUED
60 04 00 00 00 00 00 00 61 00 70 40 00 00:09:16.119 READ FPDMA QUEUED
Error 56 [7] occurred at disk power-on lifetime: 5454 hours (227 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 26 67 1c 90 40 00 Error: UNC at LBA = 0x26671c90 = 644291728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 18 00 00 26 67 1d c8 40 00 07:53:01.908 READ FPDMA QUEUED
60 04 00 00 10 00 00 26 67 19 c8 40 00 07:53:01.908 READ FPDMA QUEUED
60 04 00 00 08 00 00 26 67 15 c8 40 00 07:53:01.906 READ FPDMA QUEUED
60 04 00 00 00 00 00 26 67 11 c8 40 00 07:53:01.906 READ FPDMA QUEUED
60 04 00 00 18 00 00 26 67 0d c8 40 00 07:53:01.897 READ FPDMA QUEUED
Error 55 [6] occurred at disk power-on lifetime: 5454 hours (227 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 26 5f 45 ca 40 00 Error: UNC at LBA = 0x265f45ca = 643777994
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 26 5f 45 c8 40 00 07:52:44.526 READ FPDMA QUEUED
60 04 00 00 00 00 00 26 5f 4d c8 40 00 07:52:44.522 READ FPDMA QUEUED
25 00 00 04 00 00 00 26 5f 49 c8 40 00 07:52:44.508 READ DMA EXT
25 00 00 04 00 00 00 26 5f 41 c8 40 00 07:52:31.183 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 07:52:30.807 SET FEATURES [Enable write cache]
Error 54 [5] occurred at disk power-on lifetime: 5454 hours (227 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 26 23 a5 ca 40 00 Error: UNC at LBA = 0x2623a5ca = 639870410
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 26 23 a5 c8 40 00 07:52:02.540 READ FPDMA QUEUED
60 04 00 00 00 00 00 26 23 ad c8 40 00 07:52:02.536 READ FPDMA QUEUED
25 00 00 04 00 00 00 26 23 a9 c8 40 00 07:52:02.511 READ DMA EXT
25 00 00 04 00 00 00 26 23 a1 c8 40 00 07:51:49.379 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 07:51:49.004 SET FEATURES [Enable write cache]
Error 53 [4] occurred at disk power-on lifetime: 5454 hours (227 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 23 f1 2f a2 40 00 Error: UNC at LBA = 0x23f12fa2 = 603008930
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 23 f1 2f a0 40 00 07:50:12.633 READ FPDMA QUEUED
60 04 00 00 00 00 00 23 f1 27 a0 40 00 07:50:12.631 READ FPDMA QUEUED
25 00 00 04 00 00 00 23 f1 2b a0 40 00 07:50:12.618 READ DMA EXT
25 00 00 04 00 00 00 23 f1 23 a0 40 00 07:49:58.914 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 07:49:58.536 SET FEATURES [Enable write cache]
Error 52 [3] occurred at disk power-on lifetime: 5454 hours (227 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 20 9c 85 12 40 00 Error: UNC at LBA = 0x209c8512 = 547128594
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 20 9c 85 10 40 00 07:47:56.662 READ FPDMA QUEUED
60 04 00 00 00 00 00 20 9c 8d 10 40 00 07:47:56.660 READ FPDMA QUEUED
25 00 00 04 00 00 00 20 9c 89 10 40 00 07:47:56.639 READ DMA EXT
25 00 00 04 00 00 00 20 9c 81 10 40 00 07:47:42.242 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 07:47:41.860 SET FEATURES [Enable write cache]
Error 51 [2] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 1f c7 ab 52 40 00 Error: UNC at LBA = 0x1fc7ab52 = 533179218
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 1f c7 a7 50 40 00 01:40:50.316 READ FPDMA QUEUED
25 00 00 04 00 00 00 1f c7 a3 50 40 00 01:40:50.314 READ DMA EXT
25 00 00 04 00 00 00 1f c7 9f 50 40 00 01:40:36.692 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:40:36.310 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 01:40:36.310 SET FEATURES [Disable SATA feature]
Error 50 [1] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 1b ea c6 12 40 00 Error: UNC at LBA = 0x1beac612 = 468370962
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 1b ea c2 10 40 00 01:37:20.494 READ FPDMA QUEUED
25 00 00 04 00 00 00 1b ea be 10 40 00 01:37:20.492 READ DMA EXT
25 00 00 04 00 00 00 1b ea ba 10 40 00 01:37:05.862 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:37:05.497 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 01:37:05.497 SET FEATURES [Disable SATA feature]
Error 49 [0] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 19 f8 13 42 40 00 Error: UNC at LBA = 0x19f81342 = 435688258
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 19 f8 13 40 40 00 01:35:02.635 READ FPDMA QUEUED
60 04 00 00 00 00 00 19 f8 1b 40 40 00 01:35:02.633 READ FPDMA QUEUED
25 00 00 04 00 00 00 19 f8 17 40 40 00 01:35:02.619 READ DMA EXT
25 00 00 04 00 00 00 19 f8 0f 40 40 00 01:34:49.167 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:34:48.799 SET FEATURES [Enable write cache]
Error 48 [23] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 18 9d 25 4a 40 00 Error: UNC at LBA = 0x189d254a = 412951882
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 18 9d 21 48 40 00 01:33:28.717 READ FPDMA QUEUED
25 00 00 04 00 00 00 18 9d 1d 48 40 00 01:33:28.716 READ DMA EXT
25 00 00 04 00 00 00 18 9d 19 48 40 00 01:33:15.063 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:33:14.681 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 01:33:14.681 SET FEATURES [Disable SATA feature]
Error 47 [22] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0b 07 39 ba 40 00 Error: UNC at LBA = 0x0b0739ba = 185022906
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 0b 07 39 b8 40 00 01:29:56.920 READ FPDMA QUEUED
60 04 00 00 00 00 00 0b 07 3d b8 40 00 01:29:56.900 READ FPDMA QUEUED
25 00 00 04 00 00 00 0b 07 35 b8 40 00 01:29:56.898 READ DMA EXT
25 00 00 04 00 00 00 0b 07 31 b8 40 00 01:29:43.791 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:29:43.413 SET FEATURES [Enable write cache]
Error 46 [21] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 0a 87 15 ba 40 00 Error: UNC at LBA = 0x0a8715ba = 176625082
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 0a 87 15 b8 40 00 01:29:02.958 READ FPDMA QUEUED
60 04 00 00 00 00 00 0a 87 19 b8 40 00 01:29:02.950 READ FPDMA QUEUED
25 00 00 04 00 00 00 0a 87 1d b8 40 00 01:29:02.942 READ DMA EXT
25 00 00 04 00 00 00 0a 87 11 b8 40 00 01:28:49.624 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:28:49.229 SET FEATURES [Enable write cache]
Error 45 [20] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 36 20 23 42 40 00 Error: UNC at LBA = 0x36202342 = 908075842
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 36 20 1f 40 40 00 01:25:09.130 READ FPDMA QUEUED
25 00 00 04 00 00 00 36 20 1b 40 40 00 01:25:09.128 READ DMA EXT
25 00 00 04 00 00 00 36 20 17 40 40 00 01:24:55.761 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:24:55.419 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 01:24:55.419 SET FEATURES [Disable SATA feature]
Error 44 [19] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 56 73 42 40 00 Error: UNC at LBA = 0x34567342 = 878080834
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 34 56 73 40 40 00 01:23:15.221 READ FPDMA QUEUED
60 04 00 00 00 00 00 34 56 7b 40 40 00 01:23:15.218 READ FPDMA QUEUED
25 00 00 04 00 00 00 34 56 77 40 40 00 01:23:15.205 READ DMA EXT
25 00 00 04 00 00 00 34 56 6f 40 40 00 01:23:00.689 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:23:00.313 SET FEATURES [Enable write cache]
Error 43 [18] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 33 f6 13 42 40 00 Error: UNC at LBA = 0x33f61342 = 871764802
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 33 f6 13 40 40 00 01:22:25.284 READ FPDMA QUEUED
60 04 00 00 00 00 00 33 f6 1b 40 40 00 01:22:25.281 READ FPDMA QUEUED
25 00 00 04 00 00 00 33 f6 17 40 40 00 01:22:25.258 READ DMA EXT
25 00 00 04 00 00 00 33 f6 0f 40 40 00 01:22:10.961 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:22:10.585 SET FEATURES [Enable write cache]
Error 42 [17] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 95 00 2d a2 40 00 Error: UNC at LBA = 0x95002da2 = 2499816866
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 95 00 2d a0 40 00 01:20:31.385 READ FPDMA QUEUED
60 04 00 00 00 00 00 95 00 31 a0 40 00 01:20:31.377 READ FPDMA QUEUED
25 00 00 04 00 00 00 95 00 35 a0 40 00 01:20:31.371 READ DMA EXT
25 00 00 04 00 00 00 95 00 19 a0 40 00 01:20:18.111 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:20:17.741 SET FEATURES [Enable write cache]
Error 41 [16] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 94 f1 e5 a2 40 00 Error: UNC at LBA = 0x94f1e5a2 = 2498880930
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 94 f1 e1 a0 40 00 01:19:57.400 READ FPDMA QUEUED
25 00 00 04 00 00 00 94 f1 dd a0 40 00 01:19:57.398 READ DMA EXT
25 00 00 04 00 00 00 94 f1 d9 a0 40 00 01:19:44.368 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:19:43.997 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 01:19:43.997 SET FEATURES [Disable SATA feature]
Error 40 [15] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 94 8f b9 a2 40 00 Error: UNC at LBA = 0x948fb9a2 = 2492447138
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 94 8f b9 a0 40 00 01:19:07.451 READ FPDMA QUEUED
60 04 00 00 00 00 00 94 8f bd a0 40 00 01:19:07.432 READ FPDMA QUEUED
25 00 00 04 00 00 00 94 8f b5 a0 40 00 01:19:07.431 READ DMA EXT
25 00 00 04 00 00 00 94 8f b1 a0 40 00 01:18:54.131 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:18:53.802 SET FEATURES [Enable write cache]
Error 39 [14] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 27 82 2b fa 40 00 Error: UNC at LBA = 0x27822bfa = 662842362
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 27 82 2b f8 40 00 01:16:25.545 READ FPDMA QUEUED
60 04 00 00 00 00 00 27 82 23 f8 40 00 01:16:25.543 READ FPDMA QUEUED
25 00 00 04 00 00 00 27 82 27 f8 40 00 01:16:25.531 READ DMA EXT
25 00 00 04 00 00 00 27 82 1f f8 40 00 01:16:12.325 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 01:16:11.937 SET FEATURES [Enable write cache]
Error 38 [13] occurred at disk power-on lifetime: 5448 hours (227 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 28 7c 36 1a 40 00 Error: UNC at LBA = 0x287c361a = 679228954
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 10 00 00 28 7c 46 18 40 00 01:15:11.592 READ FPDMA QUEUED
60 04 00 00 18 00 00 28 7c 42 18 40 00 01:15:11.592 READ FPDMA QUEUED
60 04 00 00 10 00 00 28 7c 2e 18 40 00 01:15:11.590 READ FPDMA QUEUED
60 04 00 00 08 00 00 28 7c 3a 18 40 00 01:15:11.590 READ FPDMA QUEUED
60 04 00 00 00 00 00 28 7c 36 18 40 00 01:15:11.590 READ FPDMA QUEUED
Error 37 [12] occurred at disk power-on lifetime: 5447 hours (226 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 28 4f b8 20 40 00 Error: UNC at LBA = 0x284fb820 = 676313120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 18 00 00 28 3b 06 18 40 00 01:01:03.513 READ FPDMA QUEUED
60 04 00 00 10 00 00 28 3b 02 18 40 00 01:01:03.513 READ FPDMA QUEUED
60 04 00 00 08 00 00 28 3a fe 18 40 00 01:01:03.513 READ FPDMA QUEUED
60 04 00 00 00 00 00 28 3a fa 18 40 00 01:01:03.513 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:01:03.458 FLUSH CACHE EXT
Error 36 [11] occurred at disk power-on lifetime: 5447 hours (226 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 06 1b 31 da 40 00 Error: UNC at LBA = 0x061b31da = 102445530
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 06 1b 2d d8 40 00 00:59:51.199 READ FPDMA QUEUED
25 00 00 04 00 00 00 06 1b 29 d8 40 00 00:59:51.197 READ DMA EXT
25 00 00 04 00 00 00 06 1b 25 d8 40 00 00:59:37.469 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:59:37.083 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 00:59:37.083 SET FEATURES [Disable SATA feature]
Error 35 [10] occurred at disk power-on lifetime: 5447 hours (226 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 05 a8 91 da 40 00 Error: UNC at LBA = 0x05a891da = 94933466
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 05 a8 91 d8 40 00 00:58:59.243 READ FPDMA QUEUED
60 04 00 00 00 00 00 05 a8 89 d8 40 00 00:58:59.241 READ FPDMA QUEUED
25 00 00 04 00 00 00 05 a8 8d d8 40 00 00:58:59.232 READ DMA EXT
b0 00 d0 00 00 00 00 00 c2 4f 00 00 00 00:58:55.123 SMART READ DATA
25 00 00 04 00 00 00 05 a8 85 d8 40 00 00:58:44.868 READ DMA EXT
Error 34 [9] occurred at disk power-on lifetime: 5447 hours (226 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 04 f5 f9 da 40 00 Error: UNC at LBA = 0x04f5f9da = 83229146
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 00 00 00 04 f5 f9 d8 40 00 00:57:55.297 READ FPDMA QUEUED
60 04 00 00 00 00 00 04 f5 fd d8 40 00 00:57:55.289 READ FPDMA QUEUED
25 00 00 04 00 00 00 04 f6 01 d8 40 00 00:57:55.281 READ DMA EXT
25 00 00 04 00 00 00 04 f5 f5 d8 40 00 00:57:41.520 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:57:41.118 SET FEATURES [Enable write cache]
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 35/43 Celsius
Lifetime Min/Max Temperature: 21/46 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (76)
Index Estimated Time Temperature Celsius
77 2022-01-02 05:39 41 **********************
... ..( 69 skipped). .. **********************
147 2022-01-02 06:49 41 **********************
148 2022-01-02 06:50 42 ***********************
... ..( 80 skipped). .. ***********************
229 2022-01-02 08:11 42 ***********************
230 2022-01-02 08:12 43 ************************
... ..( 14 skipped). .. ************************
245 2022-01-02 08:27 43 ************************
246 2022-01-02 08:28 44 *************************
... ..( 8 skipped). .. *************************
255 2022-01-02 08:37 44 *************************
256 2022-01-02 08:38 ? -
257 2022-01-02 08:39 36 *****************
258 2022-01-02 08:40 35 ****************
... ..( 2 skipped). .. ****************
261 2022-01-02 08:43 35 ****************
262 2022-01-02 08:44 36 *****************
... ..( 3 skipped). .. *****************
266 2022-01-02 08:48 36 *****************
267 2022-01-02 08:49 37 ******************
... ..( 16 skipped). .. ******************
284 2022-01-02 09:06 37 ******************
285 2022-01-02 09:07 38 *******************
... ..( 2 skipped). .. *******************
288 2022-01-02 09:10 38 *******************
289 2022-01-02 09:11 39 ********************
... ..( 4 skipped). .. ********************
294 2022-01-02 09:16 39 ********************
295 2022-01-02 09:17 40 *********************
... ..( 5 skipped). .. *********************
301 2022-01-02 09:23 40 *********************
302 2022-01-02 09:24 41 **********************
... ..( 8 skipped). .. **********************
311 2022-01-02 09:33 41 **********************
312 2022-01-02 09:34 42 ***********************
... ..( 11 skipped). .. ***********************
324 2022-01-02 09:46 42 ***********************
325 2022-01-02 09:47 43 ************************
326 2022-01-02 09:48 43 ************************
327 2022-01-02 09:49 42 ***********************
... ..( 62 skipped). .. ***********************
390 2022-01-02 10:52 42 ***********************
391 2022-01-02 10:53 41 **********************
... ..(162 skipped). .. **********************
76 2022-01-02 13:36 41 **********************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 33 --- Lifetime Power-On Resets
0x01 0x010 4 5457 --- Power-on Hours
0x01 0x018 6 6997406761 --- Logical Sectors Written
0x01 0x020 6 48416300 --- Number of Write Commands
0x01 0x028 6 2858899079 --- Logical Sectors Read
0x01 0x030 6 14375756 --- Number of Read Commands
0x01 0x038 6 2465330816 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 4793 --- Spindle Motor Power-on Hours
0x03 0x010 4 4793 --- Head Flying Hours
0x03 0x018 4 193 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 8 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 57 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 34 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 43 --- Current Temperature
0x05 0x010 1 36 --- Average Short Term Temperature
0x05 0x018 1 38 --- Average Long Term Temperature
0x05 0x020 1 46 --- Highest Temperature
0x05 0x028 1 24 --- Lowest Temperature
0x05 0x030 1 45 --- Highest Average Short Term Temperature
0x05 0x038 1 24 --- Lowest Average Short Term Temperature
0x05 0x040 1 38 --- Highest Average Long Term Temperature
0x05 0x048 1 30 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 405 --- Number of Hardware Resets
0x06 0x010 4 515 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 4359 Vendor specific