Page 1 of 1

How to recover 2 x 500gb disks configured in raid0

Posted: 06 Aug 2013, 20:57
by DJRobin
Dear guests,

First of all I post this topic because I don't know where to begin.
I hope someone can help me.

I have a NAS (Iomega IX2 center) with 2 x 500GB Sata drives.
The problem I have with this drives is that I can't connect to them with the networkdrive.
I saw that the Iomega IX2 center led was blinking red so , I took the center apart to look to the problem.
When I attach the 2 drives with a sata to usb converter windows don't see the drives in explorer.
In the disk management console I can see the drive but without drive letters.
I just see 2 partitions : one of 996mb and one of 464,79gb both are primary partitions

I'm not familiar with this program and I read on the wiki page that you can recover partition tables and I searched for it with the program but I'm stuck now.

I hope someone could help me.

Thanks in advance.