Does TestDisk stalls? How long does it takes?

Using TestDisk to repair the filesystem
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
Locked
Message
Author
chmm97
Posts: 2
Joined: 14 Dec 2013, 02:30

Does TestDisk stalls? How long does it takes?

#1 Post by chmm97 »

Hi,

I've been running a Rebuilt BS for the past 36 hrs for an external VERBATIM 2TB drive... the search mft has't move from 625344512/3907024002 for the last 12-18 hrs... is it normal to take this long? is there a chance TestDisk is not working anymore? ...

I don't know if this is related but my skype can't connect - only in the PC where I'm running it.

Thanks,
Carlos M.

User avatar
Fiona
Posts: 2835
Joined: 18 Feb 2012, 17:19
Location: Ludwigsburg/Stuttgart - Germany

Re: Does TestDisk stalls? How long does it takes?

#2 Post by Fiona »

It's probably too long.
Would it be possible to check your disk using crystal disk info?
http://crystalmark.info/software/Crysta ... dex-e.html
It's only a diagnose, until yet I can't judge your situation.
Normally Rebuild BS takes only few minutes, except if no file system or MFT is found testdisk searches the wohle partition.
But it shoudn't stall and keep searching.

Fiona

chmm97
Posts: 2
Joined: 14 Dec 2013, 02:30

Re: Does TestDisk stalls? How long does it takes?

#3 Post by chmm97 »

I have cancelled TestDisk and run CrystalDiskInfo.. it says Heatlth Status = BAD

First row reads

(Red Circle) ID=1 Read Error Rate, Current =1, Worst =1, Thershold = 51, Raw Values =00000000B5B3

All the other data was blue.

Thanks,
Carlos M.

User avatar
cgrenier
Site Admin
Posts: 5432
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: Does TestDisk stalls? How long does it takes?

#4 Post by cgrenier »

You can contact a data recovery company or try to recover your data yourself: clone your damaged disk to a new empty one using gnu ddrescue as described in
http://www.cgsecurity.org/wiki/Damaged_Hard_Disk
Once it's done, use TestDisk on the clone.

amgbg
Posts: 2
Joined: 06 Aug 2014, 11:25

Re: Does TestDisk stalls? How long does it takes?

#5 Post by amgbg »

I have a problem similar to "chmm97", where the Rebilt BS take hours.

TestDisk cannot read either Boot Sector or BackUp Boot sector: Says they are identical and with status BAD.

I tried using Crystal Disk, but it does not even find the HDD with damaged Boot Sector. However, my computer finds the HDD with damaged Boot Sector.

Deity666
Posts: 19
Joined: 29 Jul 2014, 20:40

Re: Does TestDisk stalls? How long does it takes?

#6 Post by Deity666 »

Hey, I have found that if you click anywhere in the window and leave a white rectangle "space' it may pause the operation. Always click on the title bar or if another window, make sure you don't leave a space marker and you should be fine. I discovered that the hard way Wednesday night/Thursday morning. And with everything, if I'm mistaken, it's an unintentional error and not meant as a derogatory remark.

Locked