Read Error with testdisk

How to use TestDisk to recover lost partition
Post Reply
Message
Author
DrNick664
Posts: 1
Joined: 08 Mar 2016, 20:31

Read Error with testdisk

#1 Post by DrNick664 » 08 Mar 2016, 20:52

Hi All!

Just tried using testdisk in order to grab some information on a backup external drive I think is corrupted, but I'm getting a read error. Sad Face! I think the drive might have gotten corrupted when someone disconnected it while it was in use. I've attached a screenshot showing that the drive is marked as being "Raw DATA" in Windows disk management, and the results from testdisk (showing bad sectors) and crystaldisk (showing reallocated sectors). so far, each time I've ran the quick analysis it's gotten stuck at the same point with the read error. I should also note that the drive itself is making some fun noises when it's trying to get past that one part in the quick analysis, but only during that part. Think it might be a hardware issue? Anyone have any suggestions?
Attachments
Screen Shot 2016-03-08 at 11.30.57 AM.jpg
Screen Shot 2016-03-08 at 11.30.57 AM.jpg (242.02 KiB) Viewed 1125 times

Sponsored links

User avatar
cgrenier
Site Admin
Posts: 3813
Joined: 18 Feb 2012, 15:08
Location: Le Perreux Sur Marne, France
Contact:

Re: Read Error with testdisk

#2 Post by cgrenier » 09 Mar 2016, 08:42

Run TestDisk, select the PhysicalDrive, not F:.
Select Advanced, Boot, RebuildBS, List. If you can see your files, choose Write, confirm, Quit

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest