cgsecurity.org

I have created the array with the following command.

This is based on the order recommended by Reclaime (Windows Software)
madam --create /dev/md0 --assume-clean --chunk=64 -e1.2 --level=5 --verbose --raid-devices=4 /dev/sda3 /dev/sdb3 /dev/sdc3 /dev/sdd3

Then i ran disk analysis again using ...

Update
I have reassembled with the suggested order by reclaime software in ubuntu.
But the results is still the same from testdisk. No superblock info.

Any suggestion on how i should proceed?

Hi cgrenier,

I have placed the output below, doesnot seem like it located any superblock information.


TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/md2 - 8986 GB / 8369 GiB - CHS 2194060416 2 4

Partition Start ...

My Synology NAS RAID5 x04 disk EXT4, had x02 disk dropped out of the array. After troubleshooting, I found that 2 of the synology hdd slots were faulty.

I followed the guide initially but did not manage to assemble the array. Error message is logged below.
https://www.synology.com/en-us ...