cgsecurity.org

hello, i have this laptop hdd which stopped working after i updated my windows 10 (disk was dynamic so i want it to be change to basic)
after getting nowhere analyzing, i chose advanced, boot , rebuild bs and the program gave me can't find cluster size issue.
here's my log

Mon May 24 22:42:37 2021
Command line: TestDisk

TestDisk 7.2-WIP, Data Recovery Utility, May 2021
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
OS: Windows 8 (9200)
Compiler: GCC 9.3, Cygwin32 3001.4
ext2fs lib: 1.45.3, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: 20140608, curses lib: ncurses 6.1
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=256060514304
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=500107862016
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=255533776896
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=104855502848
Hard disk list
Disk \\.\PhysicalDrive0 - 256 GB / 238 GiB - CHS 31130 255 63, sector size=512 - SanDisk X400 M.2 2280 256GB, S/N:170201427672, FW:X4130012
Disk \\.\PhysicalDrive1 - 500 GB / 465 GiB - CHS 60801 255 63, sector size=512 - HITACHI HTS725050A7E630, S/N:TF1501Y9GLD2PF, FW:GH2ZB390

Partition table type (auto): Intel
Disk \\.\PhysicalDrive1 - 500 GB / 465 GiB - HITACHI HTS725050A7E630
Partition table type: Intel

Interface Advanced
Geometry from i386 MBR: head=255 sector=63


test_FAT()
1 P FAT16 >32M 0 32 33 12748 21 9 204795904
sector_size 0
cluster_size 0
reserved 0
fats 0
dir_entries 0
sectors 0
media 00
fat_length 0
secs_track 0
heads 0
hidden 0
total_sect 0
check_part_i386 failed for partition type 06
1 P FAT16 >32M 0 32 33 12748 21 9 204795904
2 E extended LBA 12748 53 42 25496 139 51 204802048

fat1x_boot_sector
1 P FAT16 >32M 0 32 33 12748 21 9 204795904
Boot sector
Bad

A valid FAT Boot sector must be present in order to access
any data; even if the partition is not bootable.

i hope you guys can help me pleaseeee

"after getting nowhere analyzing"
That is a pretty short useless test description!

Read here:
https://www.cgsecurity.org/wiki/TestDisk

The manual, the wiki everything is already there. In addition to that there is a forum where I repetively always give the same advice to the ever repeating same question.

right, sorry about that i have no idea what im doing right now
by getting nowhere i meant analyze - no partition found or selected for discovery - deep search - repeat and also this,
Invalid FAT boot sector
1 P FAT16 >32M 0 32 33 12748 21 9 204795904
1 P FAT16 >32M 0 32 33 12748 21 9 204795904
2 E extended LBA 12748 53 42 25496 139 51 204802048
No partition is bootable
after getting this error i tried advanced - boot - rebuild bs but still no luck

i've already read the test disk step by step section but i still don't know what to do...

i've read most of the threads and yes there already are answers to my problems but the thing is it seems i have multiple issues regrading the fixes itself

for example rebuilding bs didnt worked, and after deep search i have this issue

Disk \\.\PhysicalDrive1 - 500 GB / 465 GiB - CHS 60801 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 12748 86 11 25496 139 51 204800000
Boot sector
Status: Bad
Backup boot sector
Status: OK
Sectors are not identical.
A valid NTFS Boot sector must be present in order to access
any data; even if the partition is not bootable.

and i dnt even know what to search for unfortunately