Tried recovering some files via testdisk but not sure what step to take next.
If anyone has some time to help guide me on my next step, I would appreciate the help.
The disk is a 128gb Lexar CF card.
Tried dumping the photos via card reader and shows no files in the card, but card shows it has less than half the space available.
This is the screen message I got on testdisk
___________
TestDisk 7.2-WIP, Data Recovery Utility, February 2023
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
Disk /dev/disk1 - 128 GB / 119 GiB - 250085376 sectors
Current partition structure:
Partition Start End Size in sectors
Warning: number of heads/cylinder mismatches 16 (FAT) != 1 (HD)
Warning: number of sectors per track mismatches 63 (FAT) != 1 (HD)
1 P FAT32 LBA 63 250085375 250085313 [EOS_DIGITAL]
Warning: Bad ending sector (CHS and LBA don't match)
No partition is bootable
___________
Appreciate any help.
CHS and LBA don't match
Forum rules
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
When asking for technical support:
- Search for posts on the same topic before posting a new question.
- Give clear, specific information in the title of your post.
- Include as many details as you can, MOST POSTS WILL GET ONLY ONE OR TWO ANSWERS.
- Post a follow up with a "Thank you" or "This worked!"
- When you learn something, use that knowledge to HELP ANOTHER USER LATER.
Before posting, please read https://www.cgsecurity.org/testdisk.pdf
-
- Posts: 2752
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: CHS and LBA don't match
Use Photorec instead.
-
- Posts: 2
- Joined: 04 Mar 2023, 22:20
Re: CHS and LBA don't match
on photorec I receive the following message:
____________________
Disk capacity must be correct Referenced from: /var/root/Desktop/testdisk-7.2-WIP/photorecisted above has an incorrect size, check HD jumper settings and BIOS
detection, Expected in: /usr/lib/libSystem.B.dylibk drivers.
dyld: Symbol not found: ____chkstk_darwin
Referenced from: /var/root/Desktop/testdisk-7.2-WIP/photorec
Expected in: /usr/lib/libSystem.B.dylib
Abort trap: 6
logout
-n Saving session...
-ne
...copying shared history...
-ne
...saving history...
-n truncating history files...
-ne
...
completed.
[Process completed]
_____________________
____________________
Disk capacity must be correct Referenced from: /var/root/Desktop/testdisk-7.2-WIP/photorecisted above has an incorrect size, check HD jumper settings and BIOS
detection, Expected in: /usr/lib/libSystem.B.dylibk drivers.
dyld: Symbol not found: ____chkstk_darwin
Referenced from: /var/root/Desktop/testdisk-7.2-WIP/photorec
Expected in: /usr/lib/libSystem.B.dylib
Abort trap: 6
logout
-n Saving session...
-ne
...copying shared history...
-ne
...saving history...
-n truncating history files...
-ne
...
completed.
[Process completed]
_____________________
-
- Posts: 2752
- Joined: 04 Jan 2019, 09:48
- Location: Hannover, Deutschland (Germany, Allemagne)
Re: CHS and LBA don't match
Please check if you comply with the Apple requirements. Read Chapter 6, "Starting the tools".
https://www.cgsecurity.org/testdisk.pdf
https://www.cgsecurity.org/testdisk.pdf